• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.186-190
• /
• 2000

This paper propose a "Active common-mode voltage damper circuit" that capable of a suppression of a common-mode voltage produced in the PWM VSI. The four level half-bridge PWM inverter circuit and common-mode transformer are incorporated into the "Active common-mode voltage damper" the design method of which is presented Effect of "Active common-mode voltage damper" in this paper verifies a propriety and effectiveness in 2.2[kW] induction motor drive using IGBT inverter. Experimental results show that "common-mode voltage damper" makes contributions to reducing a high frequency leakage current and common-mode voltage.leakage current and common-mode voltage.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.151-154
• /
• 2001

This paper propose a new active common-mode voltage damper circuit that is capable of suppressing a common-mode voltage produced in the PWM VSI. The new active common mode voltage damper is consisted of a half-bridge inverter and a common mode transformer with a blocking capacitor. Principle of the active common mode damper is as follow; by applying the compensation voltage which has the same amplitude and opposite polarity to the PWM inverter system. So, common mode voltage and high frequency leakage current can be reduced. Simulated and experimental results show that common-mode voltage damper makes contributions to reducing a high frequency leakage current and common-mode voltage.

• 한국전자파학회논문지
• /
• 제29권12호
• /
• pp.963-968
• /
• 2018

본 논문에서는 수동소자를 이용한 소형 공통 모드 필터를 설계 및 제작하였다. 주어진 주파수 응답을 갖는 공통 모드 필터를 설계하기 위해 차동 모드와 공통 모드에서 등가회로를 분석하였다. 제안된 구조는 기존의 ${\lambda}/4$ 공진기로 구현된 필터에 비해 60 %의 크기가 감소하였다. 또한, 제작된 공통 모드 필터는 ${\mid}S_{dd11}{\mid}$, ${\mid}S_{cc21}{\mid}$, ${\mid}S_{cc11}{\mid}$ < -10 dB를 만족하는 27.5 %의 공통 모드 흡수 대역폭에서 최대 1.2 dB의 차동 모드 삽입손실과 최소 78.2 %의 공통 모드 흡수 효율을 갖는다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.493-498
• /
• 2004

The EMI noise source in a switching mode power supply is dominated by a common mode noise. If we can understand the common mode noise occurring mechanism, it is resulted to find out the method to suppress the EMI noise source in the switching mode power supply. The common mode noise is occurring mostly due to circuit is unbalanced which is caused by the capacitive coupling to frame ground, which passes through a heatsink of the switching devices. This research paper presents a new effective balancing method of buck converter circuit by mean of grounding the parasitic and compensation capacitors in correct proportion which is called that the common mode impedance balance (CMIB). The CMIB can be achieved by source, transmission line and termination balanced, such balancing, the common mode current will be cancelled out in the frame ground. The greatly reduced common mode noise can be confirmed by the experimental results.

• 전력전자학회논문지
• /
• 제6권5호
• /
• pp.423-431
• /
• 2001

최근의 유도전동기 구동 시스템은 고속의 ON, OFF동작 특성을 가진 전력 반도체 소자를 가진 인버터와 이를 제어하기 위한 SVPWM(Space Vector PWM)제어이론에 의하여 주로 구성되어 있다. 이러한 PWM 인버터는 정현파 형태의 전압과 전류를 얻기 위해 높은 스위칭 주파수로 동작을 하게 되고, 매 스위칭이 일어나는 순간마다 di/dt 및 dv/dt가 매우 크기 때문에 무시할 수 없는 양의 고주파 누설전류가 고정자 권선과 프레임 사이에 존재하는 기생 커패시터를 통해 접지로 흐르게 된다. 이로 인해 누전보호 계전기의 오동작 및 모터 권선의 절연파괴에 의한 모터의 수명단축 등과 같은 문제점을 야기하게 된다. 본 논문에서는 이러한 문제점을 일으키는 고주파 누설 전류와 커먼 모드 전압을 감쇄하기 위하여 4 레벨 반파 브릿지 인버터에 의해 커먼 모드 전압과 크기가 같고 극성이 반대인 전압을 생성하고, 이 전압을 커먼 모드 트랜스포머에 인가하여 누설 전류의 원인이 되는 커먼 모드 전압을 상쇄시킬 수 있는 새로운 형태의 능동형 커먼 모드 전압 감쇄기를 제안하였다. 제안된 감쇄기의 동작 성능을 P-SPICE를 이용한 시뮬레이션 및 실험을 통하여 검증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.212-216
• /
• 2001

Because conventional switching converters have been usually using unbalanced circuit topologies, parasitic capacitance between the drain/collector of an active switch and the frame ground through its heat sink may generate the common-mode conducted noise. We have proposed a balanced switching converter circuit, which is an effective way to reduce the common-mode conducted noise. As an example, a boost converter version of the balanced switching converter was presented and the mechanism of the common-mode noise reduction was explained using equivalent circuits. This paper extends the concept of the balanced switching converter circuit and presents a buck-boost converter version of the balanced switching converter. The feature of common-mode noise reduction is confirmed by experimental results and the mechanism of the common-mode noise reduction is explained using equivalent circuits.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.373-376
• /
• 1999

This paper propose a "common mode voltage damper" that is capable of reducing the common mode voltage produced in the PWM VSI. An push-pull circuits and high frequency leakage current damper[1] are incorporated into the "common mode voltage damper", the design method of which is presented. Effect of "common mode voltage damper" is simulated in this paper verifies the viability and effectiveness in 2.2kW induction motor drive using IGBT inverter. Simulated results show that "common mode voltage damper" makes significant contributions to reducing a high frequency leakage current.ducing a high frequency leakage current.

• 전력전자학회논문지
• /
• 제21권1호
• /
• pp.27-33
• /
• 2016

A pulse-width modulation (PWM) method for common mode noise reduction in a PWM inverter connected to a single-phase grid is proposed in this study. The extensively used conventional switching method may experience common mode voltage problems, which generate current leakage and electromagnetic induction problems. In the proposed switching method, the neutral point of the output voltage is always fixed at both ends of the input voltage to reduce common mode noise. The validity of the proposed method is proven through simulation and experimental results.

• 대한전자공학회논문지SD
• /
• 제40권9호
• /
• pp.714-723
• /
• 2003

아날로그 IC의 signal swing을 증가시키고 노이즈를 감소시키는 효율적이고 기본적인 방법은 fully-differential 회로를 이용하는 것이다. 하지만 differential-mode 신호처리에 영향을 미치는 common-mode 출력 레벨을 안정되도록 하기 위해서는 common-mode feedback (CMFB)회로가 사용되어야 한다. 본 논문에서는 CMFB 구성과 출력 레벨을 안정되도록 하기 위해 사용되는 에러증폭기 회로들의 설계 방법을 기술하고, 트랜지스터들로만 구성된 효율적인 저 증폭도 에러증폭기론 제안한다. 제안된 에러증폭기는 phase margin 증가 및 differential-mode 입력 신호의 swing 폭을 증가시킨다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권7호
• /
• pp.374-379
• /
• 2006

The switch mode power supply is a source of EMI with other equipment as well as with its own proper operation because of rapid changes in voltages and currents within a switching converter. The EMI is transmitted in two forms: radiated and conducted. Conducted noise consists of two categories known as the differential mode and the common mode. Common mode noise current is a major source of EMI in the switch mode Power supply. Recently, a current balancing technique has been studied to reduce the common mode noise. This paper investigates the reduction of common mode noise according to a node expansion of the switch mode power supply which is based on a current balancing technique. In this paper, seven PCB patterns of the forward converter are manufactured and experimented.