• 지구물리와물리탐사
• /
• 제23권1호
• /
• pp.38-49
• /
• 2020

음향파 완전파형역산은 탄성파 탐사를 통해 얻은 관측자료와 음향파 모델링자료를 맞춤으로써 지층의 속도모델을 고해상도로 구축하는 최적화 과정이다. 기존의 스트리머를 이용한 해양 탄성파 탐사 자료에 대한 음향파 완전파형역산에서는 압력자료만을 활용하여 P파 속도모델을 구축한다. 그러나 최근 다성분 해저면 탄성파 탐사기술의 발달로 다성분자료의 취득 사례가 늘고 있으며, 이에 따라 해양에서 얻어지는 다성분 자료를 활용한 음향파 완전파형역산 기법에 대한 연구가 필요하다. 이 연구에서는 수평 및 수직 입자가속도 자료를 활용한 효과적인 음향파 완전파형역산 전략을 제시하고자 한다. 이를 위해, 우선 음향파 모델링으로 제작된 압력 및 입자가속도 자료와 민감도커널을 분석하여 파형역산 과정에서 각 자료의 성분별 특성을 관찰하였다. 압력 자료에 함께 나타났던 직접파, 다이빙파 및 반사파가 수직 및 수평 입자가속도 자료에서 파동의 진행방향에 따라 분리되어 나타나는 것을 확인하였으며, 수평 입자가속도 자료는 상부의 장파장구조를, 수직 입자가속도 자료는 하부의 장파장구조와 전체 영역에서의 단파장구조를 구축하는 데 효과적임을 확인할 수 있었다. 이러한 분석 결과를 바탕으로 입자가속도 자료만을 활용해 음향파 완전파형역산을 수행하는 순차적 자료 활용전략을 제시하며, 압력자료를 얻지 못하였거나 품질이 낮은 경우에도 입자가속도 자료를 활용하는 음향파 완전파형역산을 통해 양호한 P파 속도모델을 구축할 수 있을 것으로 기대된다.

• 한국산업보건학회지
• /
• 제17권3호
• /
• pp.254-260
• /
• 2007

Trichloroethylene(TCE) is widely used as a degreasing solvent in workplaces. TCE is primarily toxic to the nervous system, however, systemic disorder like Stevens-Johnson syndrome has been recently reported in small-scale factories, where the government has had limited information of chemical use. A survey was performed to investigate the actual condition of using TCE and to provide practical information to occupational health service agencies and professionals. This survey was carried out on 103 factories out of 430 factories which were conducted periodic work environment measurement for TCE. Degreasing was the most popular reason for using TCE in Korea, which reached to 94%. TCE was also used as a solvent for rubber in the coating or molding process, and adhesives in the bonding process. Metal fabrication was the most common as 23%, followed by assembling automobile parts (17%), and machinery (12%). Workers exposed to TCE during full-shift were 52% while 48% were exposed during short period of the shift or intermittently. Manual or semi-automatic work occupied 87% while automatic work was just 13%. Though automatic work by a closed system was generally lower exposed to TCE, compared to manual work, it can cause a high exposure when the maintenance system is improper. Semi-automatic work especially like open-top degreasing process can cause a high exposure when local exhaust system with condensing and refrigerating coils in the degreaser does not work well. In conclusion, the survey showed nationwide status of TCE exposure in various aspects. It can be used to monitor workplaces and workers exposed to TCE to prevent occupational diseases.

• 대한기계학회논문집A
• /
• 제24권7호
• /
• pp.1779-1786
• /
• 2000

Most of traditional design processes of mechanical parts are regarded as sequential and discrete, since different kinds of softwas should be introduced. In this paper, we develop an integrated fram ework for virtual design and performance testing of an automobile seat. The system is composed of four modules, i.e. CAD, static analysis, dynamic analysis, and draft drawing module. In the CAD module, PRO/ENGINEER 3D seat model is created using parameters to be modified with the result of static and dynamic analysis. In the static analysis, headrest tere used in each design stage make it difficult to feedback their results to upstream process. These discrete processes may result in time loss and cost rise. In recent years, life cycle of product is reduced. To have competence with others, new concept design processt is simulated using ANSYS. In the dynamic analysis module, FMVSS201 test is simulated using DADS. Overall data flow is controlled by Motif. The advantage of the system is that even a novice can perform and review the whole design process, without a good hand at professional design/analysis S/W in each stage. The system also provides a virtual design space, where engineers in different development stage can access common data of design models. The concept could be applied to other fields and it could reduce time and money required in design process.

• 대한지구과학교육학회지
• /
• 제9권2호
• /
• pp.217-232
• /
• 2016

본 연구는 최근 과학의 본성이 강조되어가고 있는 시점에서 우리나라 7차 교육과정 공통과학 교과서에서 2009개정 교육과정 융합과학 교과서로 교육과정의 발전에 따라 과학의 본성 반영정도와 수준이 어떻게 변화되고 있는지 알아보았다. '과학의 본성'의 수준은 과학자들의 과학에 대한 관점을 나타내는 과학적 관점과 일반적으로 생각하거나 과학적 오개념을 나타낼 수 있는 순수한 관점으로, 교수 방법은 명시적 방법과 암시적 방법으로 분류하였다. 그렇게 과학적관점인지 순수한관점인지, 명시적인지 암시적인지의 총 4가지의 경우의 수를 이용하여 정의 하였다. Lederman(2001)의 7가지 정의를 참고한 10가지 항목을 이용해 교과서 안에 반영된 구성요소와 수준을 확인 할 수 있도록 '과학의 본성 분석 틀(NOSAT: Nature of Science Analyzing Tool)'을 개발하여 자료 분석에 사용하였고 연구결과, 교육과정이 7차 교육과정 공통과학에서 2009개정 교육과정 융합과학으로 변화함에 따라 과학의 본성에 대한 반영 정도는 발전보다 오히려 역행하고 있음을 확인 할 수 있었다. 탐구단원을 제외한 7차 교육과정 공통과학의 이론단원에서 명시적인 과학의 본성은 찾기 어려웠고, 2009개정 교육과정에서는 2007교육과정 탐구단원에서 볼 수 있었던 과학의 본성마저 사라진 것을 확인 할 수 있었다. 이러한 결과는 앞으로의 교육과정에서 과학의 본성이 제한적으로 표시될 것이 아니라 좀 더 적극적으로 반영하되 그 방법을 암시적이 아닌 명시적으로 반영하여 직접적인 교수가 되어야 할 것을 시사한다. 이를 위해서 교과서 집필자가 과학의 본성에 대한 정확한 이해를 가지고 집필해야 하고, 올바른 교수를 위해서 교사의 역량이 중요하며, 교사들을 대상으로 하는 과학의 본성에 대한 정확한 이해 및 실천에 대한 연수가 필요하다고 할 수 있다.

• Archives of Plastic Surgery
• /
• 제37권3호
• /
• pp.309-312
• /
• 2010

Purpose: An osteoma is one of the common benign tumors that penetrate the nasal portion, paranasal and frontal sinus. This tumor is mostly found by radiation test accidentally, however in rare cases; it can be found to be touched or with its symptoms as the tumor grows. We report this case since we found and healed the benign tumor which was affecting orbit and the both sides of fronal sinus. Methods: A 19 year old female patient visited to our hospital due to the mass on her forehead. The symptoms began 3 years ago but no special symptom was found except for touchable mass. She was diagnosed as the osteoma of superior orbital parts and both sides of frontal sinus using X-ray and CT scanning. The size of osteoma was $5{\times}2.5{\times}3.5\;cm$ and indicated the patterns penetrated to the right side of orbital region. The osteoma excision was conducted with coronal incision and wide area of defect part in frontal sinus and superior orbital part were reconstructed by cranial bone graft and resorbable fixation plates. Results: The patient recovered without any postoperative infections or complications and symptoms. Dysaesthesia was found on her frontal area but improved in 1 month after the surgery. Conclusion: The occurrences of osteoma in frontal sinus are rare and can be treated with conservative methods if there are no infections and symptoms. We report this case since we found the benign tumor, which was affecting orbit and the both sides of fronal sinus and healed it with coronal resectomy without any complications.

• Parasites, Hosts and Diseases
• /
• 제56권5호
• /
• pp.463-475
• /
• 2018

The present study was performed to observe histopathological effects of Oculotrema hippopotami Stunkard, 1924 infection in the eye of Hippopotamus amphibius, as well as to reveal new details of morphology and structural features of this monogenean and its comparison between 2 age stages of the parasite. This was done using both light and scanning electron microscopy, energy dispersive X-ray analysis (EDXA) and histopathology. The presence of a mixture of different generations (adult and sub-adult) in one host individual is common for Oculotrema Stunkard, 1924 in contrast to Polystoma Zeder, 1800. New metrical and graphical information obtained for adults and sub-adults compared with the previous studies. Here we show the presence of genital papillae in adults, metrical data on the distal part of the vas deferens. SEM micrographs of sperm ejaculatory structures and information about the flattened dorsal side of the body provided for the first time. Histopathological changes, such as necrosis and hemorrhage in host tissues as a result of O. hippopotami attachment structures are described. Structural analysis of different body parts of O. hippopotami of both age groups are also included. We show qualitative differences in the presence of hardening ions (S, P, Ca) in attachment structures (oral and haptor suckers) that increase with the age of the worm. The presence of sub-adults and adults on the same host, together with high levels of infection without high pathogenicity may account for Oculotrema being one of the most successful parasites among the Monogenea.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.592-599
• /
• 2004

Talus topography is that weathered rock clasts were accumulated dropping in steep slope to action of gravity. Rock fall talus is formed by the accumulation of rock debris falling as individual particles from a cliff. If the collapse is produced in talus slope. it will be possible the loss of manpower and country. Despite correct access about talus is required, domestic research was scientific access about talus short because of short resolution of aerophoto and difficulties of research about huge talus. In this Study, Our research team analgize the wetness index using the geomorphogical data. Lineament through wetness index is simillar with distribution of the talus. And, the aim of the present study is to review and compare fabric data derived from rock fall talus about orientation, distribution and morphology. These deposits tend to have approximately equal amounts of clasts oriented parallel and perpendicular to the dip direction of the slope. And, platy- shaped clasts dominate the proximal and intermediate parts of the talus, wheres blocky-shaped clasts is more common in the distal part. we carry out Rock Fall Simulation. And, We install criteria of the rockfall protective barrier using talus and geomorphological characteristics.

• Asian Pacific Journal of Cancer Prevention
• /
• 제17권sup3호
• /
• pp.59-64
• /
• 2016

Breast cancer (BC) is the most common cancer in females (27% of the total) and the main cause of death (16%) due to cancer in women in developed and developing countries. Variations in its incidence rate among geographical areas are due to various contributing factors. Since there have been a lack of studies on this topic in our country, the present spatial analysis of breast cancer incidence in Iran in 2009 was conducted using data from the national cancer registry system. The reported incidences of the disease were standardized according to the World Health Organization population and the direct method. Then data was inserted into the GIS software and finally, using the Hot Spot Analysis (Geties-Ord Gi), high-risk areas were drawn. Provinces with incidences 1.96 SD higher or lower than the national average were considered as hot spots or cold spots, at the significance level of 0.05%. In 2009, a total of 7,582 cases of BC occurred in Iran. The annual incidence was 33.2 per hundred thousand people. Our study showed that the highest incidence of BC in women occurred in the central provinces of the country, Tehran, Isfahan, Yazd, Markazi and Fars. The results of hot spots analysis showed that the distribution of high-risk BC was focused in central parts of Iran, especially Isfahan province (p <0.01). The other provinces were not significantly different from the national average. The higher incidence in central provinces may be due to greater exposure to carcinogens in urban areas, a Western lifestyle and high prevalence of other risk factors. Further epidemiological studies about the etiology and early detection of BC are essential.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권6호
• /
• pp.666-673
• /
• 2014

유한요소법은 구조해석과 진동해석을 하는데 필수적인 수단이 된지 이미 오래다. 그러나 범용 프로그램은 그 가격이 비싸고 사용 방법 또한 간단하지 않다. 여기에서는 Matlab을 이용하여 가장 사용하기 쉽고 범용성이 높고 편리한 유한요소해석법을 개발하였다. 그 편리성과 계산 효율을 높이기 위하여 구조물을 해석하기 쉬운 몇 개의 부분 구조로 나누어 해석하는 기법을 사용하였다. 각 부분구조 별로 모드해석을 수행한 뒤 결합하여 전체 구조물의 진동해석을 하고, 주파수응답함수를 그리고, 모드 형상을 출력하는 과정을 최소한의 입력으로 수행하는 프로그램을 개발하였다. 개발한 프로그램의 신뢰도를 확인하기 위하여 평판 구조물에 적용하여서 실험과 해석 결과를 비교하였고, 매우 좋은 결과를 얻었다. 이 프로그램 개발의 더 큰 목적은 개인에게 공개하여 쉽게 구조해석과 진동해석을 하게 하는데 있다.

• 한국자기학회지
• /
• 제24권5호
• /
• pp.152-159
• /
• 2014

마그네틱 기어는 두 개 이상의 분리된 장치들 사이에서 기계적인 접촉 없이 토크를 전송한다. 특히, 희토류계 영구자석을 사용한 마그네틱 기어는 고 출력으로 인해 다양한 산업에 적용된다. 따라서 마그네틱 기어는 일반적인 기어를 대체할 수 있다. 본 논문에서는 이차원 유한요소해석을 이용해 평행방향과 할박 자화 마그네틱 기어의 기어비를 선정하고, 내측과 외측 영구자석 두께, 철심 각도, 할박 세그먼트 개수, 내측과 외측 영구자석 자화 패턴과 같은 설계 변수에 따라 토크 해석을 수행하였다. 해석 결과, 개선된 설계변수를 갖는 모델이 초기 설계 모델과 비교해 더 높은 토크를 가짐을 확인하였다.