• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.7
• /
• pp.195-201
• /
• 1999

In Rollover crashes, the development of bus structure to ensure the maintenance of survival space for passengers is very important . So, this paper focuses on understanding the possibility of efficient structural development considering rollover strength through computer simulation using the commercial code, LS-DYNA3D at the initial stage of vehicle development structural members, and impact boundary conditions required by ADR59(Australian Design Rule 59)were applied. In order to confirm the validity of the computational results, the test results. After the usefulness of this method of analysis was confirmed , we have proposed the effective modificationfor rollover strength.

• 한국디지털정책학회:학술대회논문집
• /
• 2004.05a
• /
• pp.545-558
• /
• 2004

Payment Systems is one of critical infrastructures, which is increasingly dependent on IT. Failure to provide the payment services can bring disaster to national economy, which is the reason why business continuity of payment system receive much attention these days. Payment Systems are complex systems, which consist of multiple players: central bank, commercial banks, clearing house. The main purpose of this paper is to propose some business continuity strategies for the payment systems. First, in order to provide financial stability, this paper clarifies the concepts of business continuity plan(BCP). Second, this paper illustrates the processes to come up with business continuity strategies for the payment systems based on risk analysis and business impact analysis. Business continuity strategies are proposed in terms of two dimensions: vertical and horizontal.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.242-247
• /
• 2000

In this study, the Rayleigh's energy method and the Rayleigh-Ritz method on the basis of Flugge's shell theory was used to analyze the dynamic characteristics of the scroll compressor housing with clamped boundary condition. The frequencies and mode shapes from theoretical calculation were compared with those of commercial finite element code, ANSYS. In order to validate the theory, modal test was also performed by impact test and FFT analysis.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.10a
• /
• pp.301-304
• /
• 2004

Friction welding was used to weld the turbine wheel and shaft and have a good welding quality. Friction welding was conducted an the two dissimilar material, Nimonic 80A and SNCrW. The control of friction welding process parameter such as flywheel energy, interface temperature, amount of upset have an effect on the mechanical properties of the welded joint. FE simulation can be a useful tool to optimize the weld geometry and process parameters. Flash shape and thickness weld is consistent with the simulated results. Process analysis was performed by the commercial code DEFORM 2D. Mechanical property of weld joints was evaluated by microstructure, chemical component, tensile, impact, hardness test so on.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.5
• /
• pp.373-384
• /
• 2013

This paper is the second paper among two papers which constitute the paper about the rigid body dynamic analysis on the spent nuclear fuel disposal canister under accidental drop and impact to the ground. This paper performed the numerical study on the rigid body dynamic analysis. Through this study the impulsive force which is occurring in the spent nuclear fuel disposal canister under accidental drop and impact to the ground and required for the structural safety design of the canister is computed numerically. The main content of this numerical study is about the technical method how to compute the impulsive forces occurring in the canister under accidental drop and impact to the ground by using the commercial rigid body dynamic analysis computer codes. On the basis of this study the impulsive force which is occurring in the canister in the case of collision with the ground is numerically computed. This numerically computed impulsive force is increasing as the canister weight is increasing, and the canister falls plumb down and collides with the ground in three types according to the analysis results.

• Architectural research
• /
• v.15 no.4
• /
• pp.183-190
• /
• 2013

The 'one-day-shopping' concept that we experience today in a modern mega mall changed the propensity to consume compared to the past. The idea of a mega mall originated in the U.S. and the first suburban shopping malls as we know them today were built in the 1950s. The convenience of these malls had a great impact not only on consumers but also on the retail industry in general and the new mega mall idea has since spread around the world, with the largest ones located in China and Southeast Asia. Meanwhile, Korea had the fastest-growing economy during the last three decades and with that boom the compositional structure of domestic retail facilities became extremely diverse. Today, there are 36 new mega mall development plans to be completed before 2016, which represent a rapid and dynamic change in consumerism lifestyle in Korea. In this regard, this study will re-evaluate the first mega mall in Korea, the COEX Mall, and identify initial errors regarding its circulation plan and provide an ideal design strategy for future commercial mega malls based on literature review and comparison analysis.

• Journal of Korean Society of Steel Construction
• /
• v.24 no.6
• /
• pp.693-700
• /
• 2012

In this study, the Charpy impact test along with metallurgical observation was conducted to evaluate low temperature impact toughness of structural steel welds with different welding processes to find out the optimal welding process to guarantee the required impact toughness at low temperatures. The welding processes employed are shield metal arc welding (SMAW) and flux cored arc welding(FCAW), which are commonly used welding methods in construction. The Charpy impact test is a commercial quality control test for steels and other alloys used in the construction of metallic structures. The test allows the material properties for service conditions to be determined experimentally in a simple manner with a very low cost. To investigate the impact toughness at low temperatures of the steel welds, specimens were extracted from the weld metal and the heat affected zone. Standard V-notch Charpy specimens were prepared and tested under dynamic loading condition. The low temperature impact performance was evaluated based on the correlation between the absorbed energy and the microstructure. Analysis of the results showed that the optimal welding process to ensure the higher low temperature impact toughness of the HAZ and the weld metal is SMAW process using the welding consumable for steels targeted to low temperature use.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.2
• /
• pp.157-164
• /
• 2013

In this study, the structural performance of nuclear power plant containment buildings, which are made of steel fiber reinforced concrete(SFRC) and subject to aircraft crash, is examined by finite element analyses. The applied loads by aircraft crash against the buildings are modeled using Riera impact load function and by the varying aircraft contact area with respect to time. CSCM concrete model in LS-DYNA is employed to model SFRC. The parameters for the material model are determined from SFRC strength prediction models. Based on the volume ratio of steel fiber in SFRC, the structural performance of nuclear containment buildings subject to aircraft crash are analysed using a commercial finite element analysis program LS-DYNA. The safety assessments of the buildings subject to the crash are discussed and the effectiveness of SFRC for nuclear power plant containment building on the increase of aircraft crash resistance is also evaluated.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.4
• /
• pp.53-60
• /
• 2009

Recently, the Korean government has amended the "National Territory Planning Act" by adding criteria to designate the Impact Fee Zone on the basis of the population increase rate. Taking the Dongtan Newtown in Hwasung City as the case, the study first tries to apply a grid analysis method to figure out the cells that exceed the legal population increase rate criteria. Then, the study, for rather a practical purpose, introduces a scenario analysis that tries to envelope the cells into a spatially contiguous groups based on their degrees of stepwise adjacency by cell buffer formation. By overlapping the selected cell groups chosen by such stepwise scenarios over the actual zoning map of land-uses for the vicinity, it seems clear that the chosen areas rationally coincide with those residential blocks and commercial areas with the high population density in the Newtown.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.54-55
• /
• 2015

Increase of impervious areas due to expansion of housing area, commercial and business building of urban is resulting in property change of stormwater runoff. Also, rapid urbanization and heavy rain due to climate change lead to urban flood and debris flow damage. In 2010 and 2011, Seoul had experienced shocking flooding damages by heavy rain. All these have led to increased interest in applying LID and decentralized rainwater management as a means of urban hydrologic cycle restoration and Natural Disaster Prevention such as flooding and so on. Urban development is a cause of expansion of impervious area. It reduces infiltration of rain water and may increase runoff volume from storms. Low Impact Development (LID) methods is to mimic the predevelopment site hydrology by using site design techniques that store, infiltrate, evaporate, detain runoff, and reduction flooding. Use of these techniques helps to reduce off-site runoff and ensure adequate groundwater recharge. The contents of this paper include a hydrologic analysis on a site and an evaluation of flooding reduction effect of LID practice facilities planned on the site. The region of this Case study is LID Rainwater Management Demonstration District in A-new town and P-new town, Korea. LID Practice facilities were designed on the area of rainwater management demonstration district in new town. We performed analysis of reduction effect about flood discharge. SWMM5 has been developed as a model to analyze the hydrologic impacts of LID facilities. For this study, we used weather data for around 38 years from January 1973 to August 2014 collected from the new town City Observatory near the district. Using the weather data, we performed continuous simulation of urban runoff in order to analyze impacts on the Stream from the development of the district and the installation of LID facilities. This is a new approach to stormwater management system which is different from existing end-of-pipe type management system. We suggest that LID should be discussed as a efficient method of urban disasters and climate change control in future land use, sewer and stormwater management planning.