• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.7
• /
• pp.4689-4696
• /
• 2015

The purpose of this study was to evaluate biomechanical characteristics of trekking shoes using 3D Bootie method as mimics barefoot form of F Co. that provides the best comfort and plantar pressure dispersion. The control group is normal trekking shoes of M Co. and K Co.. 13 healthy males measured the foot pressure, EMG and GRF. Collected data was analyzed using One-way ANOVA in order to investigate the effects of each trekking shoes. The results are as follows: Trekking shoe of F Co. was significantly wider in contact area than others at MF and significantly lower in maximum force, peak pressure than others at RF. In the case of muscle activity, acted in the same way as the effect of barefoot walking. In the case of GRF, effectively absorbed the impact force, so it is possible to efficient walking. As a result of the analysis, trekking shoe using of 3D Bootie method of F Co. can be efficient walking by reducing the load of foot during walking.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.52
• /
• pp.211-219
• /
• 1999

Sleeping is important activity in bedroom and it takes one third of our lifetime. The body pressure distribution on bed has been considered as one of the most important factors affecting sleeping comfort. The measurement contact pressure has been applied to design seat, mattress, shoes, etc., for prevention of pressure sores and improvement of products. This paper discusses the recognizing rule of sleeping posture using contact pressure. Subjects' ages are ranged from twenties to fifties. They include 29 males and 35 females. Body pressure distribution is measured in the state of stable bed when subject lies on his/her back, on his/her side and on his/her face. We made recognizing rules of sleeping posture through statistical analysis; ANOVA and regression analysis, qualitative analysis.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.10 no.2
• /
• pp.21-28
• /
• 1986

This paper is concerned with the mutual relationship among interpressure, last. foot within a new shoe and foot within a fifty-hour-used shoe at the standing posture at three different heel-heights 1. The interrelationship between the heel-heights and interpressure is very significant at the level of $0.1\%$. The heel-heights cause high interpressure at different parts of foot; heel point and big toe point in a 3 cm-heel shoe, big toe point and heel outside joint point in a 5 cm-heel shoe, and little toe point, heel-outside joint point, and arch point in a 7 cm-heel shoe. 2. Foot girth and foot width measurements either within a new shoe or within a fifty-hour-used shoe significant at the level of $5\%,\;1\%,\;0.1\%$ and show discrepancies at three different heel heights; the part between instep and ball joint in a 3 cm-heel shoe, toe part in a 5 cm-heel shoe, heel-inside joint. heel-outside joint and toe part in a 7 cm-heel shoe are highly influenced by heel heights. The higher the shoe-hee15 are, the more heavily the fore part of foot is pressured in lateral direction because shoe is made to have high instep from a fashion viewpoint. Higher shoe heels prevent weight pressure from being concentrated on heel. If shoe heels are toe high, people in such shoes feel easily tired. It is very worthy of note in selecting shoes to consider not only the shoe fashion but also fore shoe type, heel height, and shoe material with proper elasticity.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.2
• /
• pp.41-55
• /
• 2005

In this study, weight carrying pattern analysis and comparison method of four foot region were suggested. We used three types of club(driver, iron7, pitching wedge). This analysis method can compare between top class golfer and beginner. And the comparison data can be used to correct the swing pose of trainee. If motion analysis system, which can measure the swing speed and instantaneous acceleration at the point of hitting a ball, is combined with this plantar foot force analysis method, new design development of golf shoes to increase comfort and ball flight distance will be available. 1. Regional change of force acting, in address, is evenly distributed on both feet. In back swing top, 76% on right foot, 75% on left foot as impact, and 86% on left foot as finish. As regional force acting, in address, pros get high marks on rare and inside of right foot and rare and outside for amateurs. In back swing top, it is higher as fore and inside of left foot, pros as rare part of right foot and amateurs as forefoot. In impact, it is higher for pros and amateurs in outside and rare part of left foot and fore and inside of right foot. In finish, for both pros and amateurs, it is higher for outside and rare parts of left foot. 2. For each club, forces are evenly distributed on both feet in address. In back swing top, the shorter a club is, the higher impact on right foot and the higher finish distribution on left foot. For all the clubs used, in each region, pros get higher on rare and inside of right foot and as amateurs on rare and outside of left foot in address. In back swing top, for all clubs, pros get higher on rare and outside of right foot as fore and outside for amateurs. In impact acting, for all clubs, rare and outside of left foot get higher. In finish, force concentrates on rarefoot. 3. On both feet force, right foot forces of amateurs is higher than those of pros in back swing top. In impact and finish, pros get higher on left foot.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.2
• /
• pp.239-249
• /
• 2015

This study was focused on how the various materials of footwear affect the preferences of functionality and the level of discomfort when wearing. Datas were collected using questionnaire, age of 20's to 50's of female and male. Results were analysed using SPSS WIN 2.0 through t-test and ANOVA test. Results are as follows: In the preferences of materials of footwear, datas showed the shoes are of genuine leather, the sneakers are of textiles, the sandals are of man-made leather and the boots are of genuine leather. The important factor to the preferences of the materials were the leathers in the durability, the man-made leathers in easy-care and maintenance, the rubber and the complex materials in comforts. The level of the discomforts of the footwear were highly ranked in genuine leather, the man-made leather and the complex material with man-made leather and textiles followed. Man-made leather and the textiles represented the discomfort in the ankle. Mostly discomforts of the footwear showed in the sole and the top side of the foot in all kinds of footwear. The preferences in functionality were collected by the female, also female preferred the comfort the first, male preferred the durability. And the texture and the durability were highly preferred in aged female and male.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.2
• /
• pp.361-380
• /
• 2002

The purposes of this study were to a analysis of friction relation between tennis outsole and tennis playing surfaces. Tennis footwear is an important component of tennis game equipment. It can support or damage players performance and comfort. Most importantly athletic shoes protect the foot preventing abrasions and injuries. Footwear stability in court sports like tennis is incredibly important since it is estimated that as many as 45% of all lower extremity injuries occur in the foot and ankle. The friction force is the force exerted by a surface as an object moves across it or makes an effort to move across it. The friction force opposes the motion of the object. Friction results when two surfaces are pressed together closely, causing attractive intermolecular forces between the molecules of the two different surfaces. The outsole provides traction and reduces wear on the midsole. Today's outsoles address sport specific movements (running versus pivoting) and playing surface types. Different areas of the outsole are designed for the distinct frictional needs of specific movements. Traction created by the friction between the outsole and the surface allows the shoe to grip the surface. As surfaces, conditions and player motion change, traction may need to vary. An athletic shoe needs to grip well when running but not when pivoting. Laboratory tests have demonstrated force reductions compared to impact on concrete. There is a correlation between pain, injury and surface hardness. These are a variety of traction patterns on the soles of athletic shoes. Traction like any other shoe characteristic must be commensurate and balanced with the sport. The equal and opposite force does not necessarily travel back up your leg. The surface itself absorbs a portion of the force converting it to other forms of energy. Subsequently, tennis court surfaces are rated not only for pace but also for the percentage of force reduction.

• Journal of the Korean Society of Costume
• /
• v.56 no.1 s.100
• /
• pp.44-55
• /
• 2006

The purpose of this study is to examine the characteristics of man's boots in the Joseon Dynasty and compared them with those of the Ming and Qing Dynasty to find the influential relationships between them. Boots in the Joseon Dynasty are divided into several kinds such as Heukgwejapihwa, Hheuksapihwa(黑斜皮靴), Heukpihwa(黑皮靴), Mokhwa(木靴), Hyeopgeumhwa(挾金靴), Suhwaja (水靴子), Jeonpihwa, Gijahwa(起子靴), and Baekhwa(白靴). In addition, Jeong(精: footwear) was put inside boots. They tend to be named according to their materials or ornaments on them. First, Jeong put inside the boots is regarded as footwear for the comfort of the feet or protection against cold. Mokhwa appears in literature around the 19th century. As shown by remains and paintings of those days, it is considered to have become the common name of boots as it underwent many changes. On the other hand, a book in the era of King Gojong includes pictures of Suhwaja. Compared to Hukpihwa in the same book. The topside seems to have been raised in order to make the wearer who put on a military uniform feel comfortable when walking, since the bottom piece is hard. Baekhwa is worn not only with funeral garments but also with Sibok(時服), one of official uniforms. Boots in the Joseon Dynasty had been made following the design of the Ming Dynasty since official uniforms were conferred upon King Gongmin in the late Koryo Dynasty. But turning the late Joseon Dynasty its detailed design changed little by little. The topside of the boots became more round, the entrance part became wider, height of the shoes became taller, and the bottom piece became parallel to the ground.

• Journal of Korean Foot and Ankle Society
• /
• v.5 no.2
• /
• pp.120-128
• /
• 2001

Purpose: This study was undertaken to review the precise morphological patter'ns of polydactyly of the foot and to evaluate outcomes of surgical interventions. Materials and Methods: The records of patients who had polydactyly of foot from 1983 to 2000 were reviewed retrospectively. 29 duplicated toes(24 patients) were analyzed. All cases were evaluated and classified with Temtamy and McKusick's axial pattern, Watanabe's morphologic pattern and level of duplication. Clinical evaluation was performed according to Phelps and Grogan's. Mean age at surgery was 5.7 years(range: 10 months$\sim21$ years). All the patients were subsequently evaluated during mean 17 months(range: 13 months-$\sim5$ years). Results: Preaxial polydactyly was seen in 3 cases, central polydactyly in 3 cases, postaxial polydactyly in 22 cases and remaining 1 case was multiple my involvement. Only 2 patients have familial history and the most common associated anomaly was hand deformity(20.8%). Clinical results were excellent in 14 cases, good in 5 cases, poor in one. 17 patients(70%) were operated before 6 years olds and they had better results than those of who were operated after 6 years olds. Conclusion: The Method of surgical correction for the polydactyly should be individualized by its morphological pattern because the purpose of operation was to give comfort in wearing shoes and patient's psychological relief. This study showed that polydactyly of the foot could be corrected surgically with good results in most cases, and the better results would be achieved if the operation is performed before preschool age according to its individualized pattern of duplication.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.11 s.158
• /
• pp.1519-1530
• /
• 2006

This study has surveyed and analyzed in 2005 S/S domestic men's street fashion by using the Web-SFAS system that was developed and completed in the earlier research. Total of 270 men who were sensitive to fashion were surveyed around 5 nationwide cities and 9 commercial zones. The analysis results of the questionnaire and image survey in 2005 S/S for each commercial zone was shown as follows. 1. The most interest in producing fashionable shape when they go out was in the order of clothes>hair style>shoes and it was found that the proper reason for visiting the commercial zone was to meet with friends>watching movies>shopping etc. 2. T-shirts were most preferred as upper garments and as for bottoms, blue jeans were preferred. Black, gray, and white colors were most preferred and blue color was most preferred primarily due to the preference for blue jeans. The color image was proven mainly modem and light tone, comfortable and casual items were preferred. An active comfort casual image emphasized with activeness by coordinating comfortable T-shirts or shirts with blue jeans were most preferred in 9 areas. 3. A clear difference was confirmed in color by commercial area. Blackish color was most prevalent in Daehakro whereas simple color was mostly shown around Hongik University area. Bright and unique colors such as green and violate were dominant at Dae-Gu Dongseongro, and basic colors such as white and black were preferred in Masan Hapseong-dong and Changwon Sangnam-dong. Through the results of nationwide street fashion survey, the each commercial zone has unique characteristics in fashion trend even in the same city, rather than the regional difference in Seoul and local city.

• Journal of the Korean Society of Costume
• /
• v.54 no.4
• /
• pp.75-84
• /
• 2004

Stage costumes perform not only the instrumental but also the expressive functions. The major goal of this study is to develop the functional and aesthetic costume designs for musical players considering the characteristics of instruments. players’ postures. The scope of this study is restricted to the musical costumes for female adult soloists playing the wind and string instruments. This study is composed of theory research, empiricalresearch and manufacturing a real costume. First, theory research contains theory of musical costumes and that of pure musical areas. Concept, characteristics and wearing effects are analysed in theory of musical costumes. Second, designs of instruments and playing postures are analysed in the theory of pure musical areas. Proper and improper designs are compared based on the survey asking the favorite designs of 56 wind and string players. Third, I manufacture a stage costume for a harpist. The conclusions of this study are as follows. First, wind and string players think the functionality of costumes more importantly than the esthetic sense. And there are differences in design preferences for different playing postures. Second, string Players basically use arms, fingers and the upper body. Wind players use fingers more than string players and do abdominal breathing. Third, string players think the design of arms and sleeves because of frequent usage of bow and prefer the design without sleeves. On the contrary, wind players think the silhouette importantly because of standing playing posture. Fourth, players don't think that the accessory is not important and want it so long as it doesn't hinder playing. Fifth, shoes plays more important role than costume in case of playing posture with using pedals and moving legs frequently. Lastly, both wind and string players prefer the design with simplicity and comfort most.