• International Journal of Contents
• /
• 제15권2호
• /
• pp.75-78
• /
• 2019

The Integration technique of combining the measurement method with the fine precision of the sensor collecting the satellite-based information to determine the displacement space is available to a variety of diagnostic information. The measurement method by a GNSS with the sensors is needed since there will always be occasional occurrence of natural disasters caused by various environmental factors and the surroundings. Such attempts carried out nationally by distributed torsional displacement of the terrain and facilities. The combination of the various positioning analysis of mm-class for the facility of main area observed is required constantly in real time information of the USN/IoT Smart sensors and should be able to utilize such information as a precisely fine positioning information for the precisely fine displacement of the semi-permanent main facilities. In this study, for the installation of the receiving system, the USN/IoT base line positioning are easily accessible for the target bridges. Transmitting hourly from the received data is also executed in real time using the wireless Wi-Fi/Bluetooth bridges and related facilities to automatically process a fine position displacement. The results obtained from this method can be analyzed by real-time monitoring for a large structure or facilities for disaster prevention.

• Geomechanics and Engineering
• /
• 제18권3호
• /
• pp.235-245
• /
• 2019

This paper presents a novel methodology for face stability assessment of rock tunnels under water table by combining the kinematical approach of limit analysis and numerical simulation. The tunnels considered in this paper are excavated in fractured rock masses characterized by the Hoek-Brown failure criterion. In terms of natural rock deposition, a more convincing case of depth-dependent mi, GSI, D and ${\sigma}_c$ is taken into account by proposing the horizontally layered discretization technique, which enables us to generate the failure surface of tunnel face point by point. The vertical distance between any two adjacent points is fixed, which is beneficial to deal with stability problems involving depth-dependent rock parameters. The pore water pressure is numerically computed by means of 3D steady-state flow analyses. Accordingly, the pore water pressure for each discretized point on the failure surface is obtained by interpolation. The parametric analysis is performed to show the influence of depth-dependent parameters of $m_i$, GSI, D, ${\sigma}_c$ and the variation of water table elevation on tunnel face stability. Finally, several design charts for an undisturbed tunnel are presented for quick calculations of critical support pressures against face failure.

• 품질경영학회지
• /
• 제46권4호
• /
• pp.821-842
• /
• 2018

Purpose: To derive key requirements and key technologies for weapon system acquisition business by using Qualify Function Deployment (QFD), and to reduce business cost by setting the target performance and key expense of weapon system. Methods: We propose a QFD methodology that can induce rational decision-making by translating analyst's subjective opinions into quantitative values when analyzing requirements at the initial stage of weapon system development project. Based on QFD methodology, QFD application model combining house of quality, value engineering, and analogy cost estimating technique is presented. Results: It was possible to analyze the specific requirements necessary for the development of the weapon system, to solve the communication problem of the participants, to set clear development direction and target. Conclusion: By applying the QFD application model at the early stage of the weapon system acquisition project, it is possible to reduce the business cost by establishing clear development direction and goal through the procedural analysis process.

• Structural Engineering and Mechanics
• /
• 제87권6호
• /
• pp.555-574
• /
• 2023

An efficient optimization algorithm and damage-sensitive objective function are two main components in optimization-based Finite Element Model Updating (FEMU). A suitable combination of these components can considerably affect damage detection accuracy. In this study, a new hybrid damage-sensitive objective function is proposed based on combining two different objection functions to detect the location and extent of damage in structures. The first one is based on Generalized Pseudo Modal Strain Energy (GPMSE), and the second is based on the element's Generalized Flexibility Matrix (GFM). Four well-known population-based metaheuristic algorithms are used to solve the problem and report the optimal solution as damage detection results. These algorithms consist of Cuckoo Search (CS), Teaching-Learning-Based Optimization (TLBO), Moth Flame Optimization (MFO), and Jaya. Three numerical examples and one experimental study are studied to illustrate the capability of the proposed method. The performance of the considered metaheuristics is also compared with each other to choose the most suitable optimizer in structural damage detection. The numerical examinations on truss and frame structures with considering the effects of measurement noise and availability of only the first few vibrating modes reveal the good performance of the proposed technique in identifying damage locations and their severities. Experimental examinations on a six-story shear building structure tested on a shake table also indicate that this method can be considered as a suitable technique for damage assessment of shear building structures.

• 척추신경추나의학회지
• /
• 제6권1호
• /
• pp.43-52
• /
• 2011

Objectives : The aim of this study is to investigate the effectiveness of combining "Danmuji Anchu Traction technique" on acute peripheral facial paralysis. Methods : Clinical studies were done 36 patients who were treated acute peripheral facial paralysis to Dept. of Acupuncture and Moxibustion, of Oriental Medicine Hospital Dongeui University from July 10, 2009 to September 15, 2010. subjects were randomly divided into 2 groups. : Complex oriental medical treatment without "Danmuji Anchu Traction technique" treated group (Group A, n=18), Complex oriental medical treatment with "Danmuji Anchu Traction technique" treated group (Group B, n=18). All process of treatment were performed by double blinding method. To compare the effectiveness of treatment applied for two groups, we used Yanagihara's unweighed grading system at before treatment, after 1week and 2weeks of treatment. Results: The Yanagihara's Scores of Group B and Improvement Indexes of Group B were higher than those of Group A, and showed significant difference statistically. "Danmuji Anchu Traction technique" can be available for relieving symptoms related with Acute Peripheral Facial Paralysis. And there were significant differences statistically between Complex oriental medical treatment without "Danmuji Anchu Traction technique" and Complex oriental medical treatment with "Danmuji Anchu Traction technique" on Acute Peripheral Facial Paralysis. Conclusions: These results suggested that "Danmuji Anchu Traction technique" effected for Acute Peripheral Facial Paralysis.

• International Journal of Precision Engineering and Manufacturing
• /
• 제7권1호
• /
• pp.3-8
• /
• 2006

This paper deals with an automated computer-aided process planning and die design system by which designer can determine operation sequences even if they have a little experience in process planning and die design for axisymmetric products. An attempt is made to link programs incorporating a number of expert design rules with the process variables obtained by commercial FEM softwares, DEFORM and ANSYS, to form a useful package. The system can provide a flexible process based on either the reduction in the number of forming sequences by combining the possible two processes in sequence, or the reduction of deviation of the distribution on the level of the required forming loads by controlling the forming ratios. Especially in die design module optimal design technique and horizontal split of die insert were investigated for determining appropriate dimensions of components of multi-former die set. Results obtained, using the modules, enable the design and manufacture of a die set for a multi-former to be more efficiently performed.

• Journal of the Optical Society of Korea
• /
• 제1권2호
• /
• pp.90-93
• /
• 1997

The shallow depth of focus in conventional light microscopy hinders the observation of the whole image when the object is thicker than the depth of field. Most of the existing techniques measured the object distance, which is not necessarily the actual distance of each pixel in the image. We implemented a means of determining the "best focus" of each pixel and located the height of object points by sectioning at different sample heights. Combining the height information and its gray values together, we obtained an image where the blur from the finite depth of focus is eliminated. Limitations of the technique are discussed together with composed images.ed images.

• The Journal of the Acoustical Society of Korea
• /
• 제26권3E호
• /
• pp.97-103
• /
• 2007

We propose a combined STBC (Space Time Block Coding) and AMC (Adaptive Modulation and Coding) in the underwater multipath communication channel. Performance of UAC (underwater acoustic communication) in shallow water is degraded by complicated multipath and reverberation. For this reason, and considering the variability of the ocean channel, we combined STBC and AMC techniques, which are the spatial diversity in a multi-sensor communication system. BER (Bit error rate) of combined STBC and AMC is improved by 5dB when we compare with the BER of a single sensor based system. The proposed system shows a 3dB improvement when we compare it with the BER of the single sensor based system applying the AMC technique only.

• Nuclear Engineering and Technology
• /
• 제16권2호
• /
• pp.97-105
• /
• 1984

고장수목 정점사상에 대한 이용불능도의 불화실성을 분석하기 위한 방법 및 전산코드를 개발하였으며 그 유용성을 검증하였다. 이 방법은 몬테카를로 방법과 모멘트 방법을 고장수목 축소 기법과 함께 조합하여 개발하였고 WASH-1400에 있는 고장수목과 신뢰도 자료를 이용하여 본 연구에서 개발된 코드의 효율성을 검증하였다. 몬테카를로 방법과의 비교결과 이 방법을 이응하면 계산시간을 상당히 줄일 수 있으며 충분히 정확한 결과를 얻을 수 있음을 입증하였다.

• 한국통신학회논문지
• /
• 제30권5A
• /
• pp.402-406
• /
• 2005

본 논문에서는 주파수공간블록부호 (Space Frequency Block Code)를 적용한 다중송수신(Multiple Input Multiple Output)-OFDM(Orthogonal Frequency Division Multiplex) 시스템을 위한 반복복호 기법을 제시한다. 제시된 반복복호 기법은 zero-forcing 알고리즘과 LDPD 부호화 알고리즘을 터보 기법을 바탕으로 상호보완을 할 수 있도록 설계되었다. 시뮬레이션 결과에 의하면 고차원 변조방식을 적용한 MIMO-OFDM 페이딩 채널에서 기존의 시스템과 비교하여 향상된 성능을 확인하였다.