• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2000년도 제20회 KOSCO SYMPOSIUM 논문집
• /
• pp.67-75
• /
• 2000

Computational fluid dynamics(CFD) analysis of the thermal flow in a municipal solid waste(MSW) incinerator combustion chamber provides crucial insight on the incinerator performance. However, the combustion of the waste bed is typically treated as an arbitrarily selected profile of combustion gas. A strategy for simultaneous simulation of the waste bed combustion and the thermal flow fields in the furnace chamber was introduced to substitute the simple inlet condition. A waste bed combustion model was constructed to predict the progress of combustion in the bed and corresponding generation of the gas phase species, which assumes the moving bed as a packed bed of homogeneous fuel particles. When coupled with CFD, it provides boundary conditions such as gas temperature and species distribution over the grate, and receives radiative heat flux from CFD. The combined simulation successfully predicted the physical processes of the waste bed combustion and its interaction with the flow fields for various design and operating parameters, which was limited in the previous CFD simulations.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.205-209
• /
• 1994

The main purpose of this study is constructing new velocity fields on the base of shape function used in finite element method and showing the possibility of application it to metal forming processes. Utilizing the 8-node quadratic rectangular element, we expressed the velocity within the deformation region by interpolating the velocity of each nodal points. And the upper-bound formulation from this velocity fields was derived. In order to confirm the validity of this method we applied it to axisymmetic combined extrusion problem. the results of load show that this method is on better agreement with experiment than the conventional UBET, and also the flow pattern and profile of extruded part are reasonable.

• Environmental Engineering Research
• /
• 제10권2호
• /
• pp.62-70
• /
• 2005

Pollution loading of Combined Sewer Overflows (CSOs) is frequently over the capacity of a wastewater treatment plant (WWTP) receiving the water. The objectives of this study are to investigate water quality of CSOs in Anmyun-ueup, Tean province and to apply Storm Water Management Model to predict flow rate and water quality of the CSOs. The capacity of a local WWTP was also estimated according to rainfall duration and intensity. Eleven water quality parameters were analyzed to characterize overflows. SWMM model was applied to predict the flow rate and pollutant load of CSOs during rain event. Overall, profile of the flow and pollutant load predicted by the model well followed the observed data. Based on model prediction and observed data, CSOs frequently occurs in the study area, even with light precipitation or short rainfall duration. Model analysis also indicated that the local WWTP’s capacity was short to cover the CSOs.

• 한국표면공학회지
• /
• 제33권5호
• /
• pp.309-318
• /
• 2000

The 6063 Aluminium alloy were electrocolored and anodized at the same time in addition of $CoSO_4$, $FeSO_4$, in the electrolyte and investigated by AES/SAM. It was found that the thickness of anodic oxide film is increased linearly in DC type, and DC combined AC type, the more ratio of anodic Portion in AC, the more increased of anodic film thickness. The color of anodic film was changed from silver to yellow when the increase of the ratio of cathodic portion in AC. Also the increase of $CoSO_4$, $FeSO_4$ in the electrolyte, the coloring time is decreased. From the AES/SAM results, the element of anodic oxide film are Al,O and S. The result of depth profile, the most of the S distributed on the surface and the more S is in DC combined AC type than only DC type.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제31회 춘계학술대회
• /
• pp.251-257
• /
• 2000

A numerical simulation of the temperature rise for sliding surface in dry contact is based on Jaeger's formula combined with a calculated heat input. A gear tooth temperature analysis was performed. The pressure distribution has the Hertzian pressure distribution on the heat source. The heat partition factor is calculated along line of action. A Temperature distribution of tooth surface is calculated about before and after profile modification. A Temperature of addendum and deddendum in modified gear have reduced.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권2호
• /
• pp.331-337
• /
• 2001

A numerical simulation of the temperature rise for sliding surface in dry contact is based on Jaegers formula combined with a calculated heat input. A gear tooth temperature analysis was performed. The pressure distribution has the Hertzian pressure distribution on the heat source. The heat partition factor is calculated along ling of action. A Temperature distribution of tooth surface is calculated about before and after profile modification. A Temperature of addendum and deddendum in modified gear have reduced.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.530-534
• /
• 1989

In this paper we addressed the basic concept of microstepping, analyzed the combined effect of the motor detent torque and the current profile, and implemented a microstepping drive system using an one-chip microprocessor, power MOSFET's, and a 1.8 degree bifilar-wound hybrid-type step motor excited by a bipolar drive. Experimental results show that microstepping produces greater resolution, eliminates resonant step loss, and reduces motor vibrations.

• 한국정밀공학회지
• /
• 제33권11호
• /
• pp.927-935
• /
• 2016

A gerotor is suitable for miniature manufacturing because it has a high discharge per cycle and a simple structure, while also being widely used as lubrication oil of engines and the hydraulic source of automatic transmission. In the automobile industry, it has been necessary to continuously improve the flow rate and noise of internal gear pumps for better fuel efficiency through optimal gerotor design. In this study, to obtain an optimal gerotor with an ellipse-elliptical involute-ellipse combined lobe shape, an automatic program was developed for calculating performance parameters and drawing a gerotor profile. An oil pump was assembled with the optimal gerotor together with the port used at the actual field and CFD analysis was performed on this assembly using Ansys-CFX. A performance test for the oil pump was carried out and showed good agreement with the results obtained from the theoretical analysis and the CFD analysis.

• Journal of Nutrition and Health
• /
• 제22권3호
• /
• pp.167-174
• /
• 1989

Vitamin B-2와 Vitamin B-6 결핍이 hematologic profile에 미치는 영향을 in vivo 계에서 알고보고자 하였다. 흰쥐에게 Vitamin B-2 결핍(-B2)식이, Vitamin B-6결핍(-B6)식이, Vitamin B-2와 Vitamin B-6복합 결핍(-B2-B6) 식이 또는 통제 식이를 6주 동안 공급한 후 희생시켜 Hematocrit (Ht), Hemoglobin(Hb), 혈장철 (PI), Transferrin포화도 (TS), 간장철 (LI)를 비교하였다. 통제군에 비하여 -B2군에서는 PI, TS, LI가 유의하게 낮았으나 Ht와 Hb은 유의한 차이가 없으며, -B6군에서는 Ht와 Hb는 유의하게 낮았으나 LI는 유의하게 높았다. 통제군에 비하여 -B2-B6군에서는 Hb, PI, TS, LI가 -B2군과 -B6군의 중간수준이었으며 Ht는 낮은 수준을 나타냈다. 2주간의 보충식이 후에는 -B2군과 -B6군에서 모든 혈액지표와 LI가 개선된 것으로 나타났다. 본연구의 결과는 Vitamin B-2와 Vitamin B-6의 섭취가 영양적 빈혈군에서 혈액 지표를 개선시켜 빈혈의 예방또는 치료에 중요하다는 것을 시사한다.

• 한국해안·해양공학회논문집
• /
• 제26권4호
• /
• pp.244-252
• /
• 2014

후정해수욕장의 모래 이동을 분석하기 위해 경험고유함수(Empirical Orthogonal Function; EOF) 분석법을 적용하였다. EOF 분석을 위해 2009년 6월부터 2010년 5월까지 13개 기선에 대해서 총 5회 실시된 후정해수욕장의 단면 관측값이 사용되었다. 13개 단면 분석결과 사이의 시간적, 물리적 일관성을 확보하기 위해 13개 기선 모두를 하나로 통합하고 이를 사용해 EOF 분석을 수행하였다. 분석결과 첫 번째 고유함수는 평균해빈 지형을 나타내었으며 두 번째와 세 번째 고유함수의 경우 해빈의 자연변동성과 파랑에 의해 발생된 횡방향 모래이동을 각각 나타내었다. 네 번째와 다섯 번째 고유함수의 경우 특별한 연관성을 발견할 수 없었다. 결론적으로 후정해수욕장의 모래 이동에 영향을 미치는 요인은 크기 순으로 자연변동성과 파랑에 의한 횡방향 모래이동으로 분석 되었다.