• Title/Summary/Keyword: Combined forces

Search Result 320, Processing Time 0.026 seconds

Beam structural system moving forces active vibration control using a combined innovative control approach

  • Lee, Ming-Hui
    • Smart Structures and Systems
    • /
    • 제12권2호
    • /
    • pp.121-136
    • /
    • 2013
  • This study proposes an innovative control approach to suppress the responses of a beam structural system under moving forces. The proposed control algorithm is a synthesis of the adaptive input estimation method (AIEM) and linear quadratic Gaussian (LQG) controller. Using the synthesis algorithm the moving forces can be estimated using AIEM while the LQG controller offers proper control forces to effectively suppress the beam structural system responses. Active control numerical simulations of the beam structural system are performed to evaluate the feasibility and effectiveness of the proposed control technique. The numerical simulation results show that the proposed method has more robust active control performance than the conventional LQG method.

천안함 폭침 이후 북한의 군사도발 양상과 전망 (Trends and Prospects of N. Korea Military Provocations After the Sinking of ROKS Cheon-an)

  • 김성만
    • Strategy21
    • /
    • 통권34호
    • /
    • pp.58-92
    • /
    • 2014
  • Even after S. Korea took 5.24 Measure(24 May 2014), N. Korea has not stopped raising provocations such as the shelling of Yeonpyeong Island, electronic and cyber attacks. To make matters worse, the communist country lunched long-range missiles(twice) and conducted 3rd nuclear test, escalating tensions which could possibly lead to an all-out war. Korean Government failed to respond properly. However, escalation into an all-out war was deterred by the CFC immediately carrying out its peacetime duty(CODA). The US made a rapid dispatch of its augmentation forces(Aircraft carrier, nuclear-powered submarine, strategic bomber, F-22) to the Korean Peninsula. In recognition of the importance of the Combined Forces Command, since May 2013 the Park Geun-Hye Administration has been pushing ahead with re-postponement of Wartime Operational Control Transfer(which initially meant the disassembling of the CFC as of 1 December 2015) More recently, there has been a series of unusual indicators from the North. Judging from its inventory of 20 nuclear weapons, 1,000 ballistic missiles and biochemical weapons, it is safe to say that N. Korea has gained at least war deterrence against S. Korea. Normally a nation with nuclear weapons shrink its size of conventional forces, but the North is pursuing the opposite, rather increasing them. In addition, there was a change of war plan by N. Korea in 2010, changing 'Conquering the Korean Peninsula' to 'Negotiation after the seizure of the Greater Seoul Metropolitan Area(GSMA)' and establishing detailed plans for wartime projects. The change reflects the chain reaction in which requests from pro-north groups within the South will lead to the proclamation of war. Kim, Jeong-Un, leader of N. Korean regime, sent threatening messages using words such as 'exercising a nuclear preemptive strike right' and 'burning of Seoul'. Nam, Jae-June, Director of National Intelligence Service, stated that Kim, Jung-Un is throwing big talks, saying communization of the entire Korean Peninsula will come within the time frame of 3 years. Kim, Gwan-Jin, Defense Minister, shared an alarming message that there is a high possibility that the North will raise local provocations or a full-fledged war whenever while putting much emphasis on defense posture. As for the response concept of the Korean Government, it has been decided that 'ROK·US Combined Local Provocation Counter-Measure' will be adopted to act against local provocations from the North. Major provocation types include ▲ violation of the Northern Limit Line(NLL) with mobilization of military ships ▲ artillery provocations on Northwestern Islands ▲ low altitude airborne intrusion ▲ rear infiltration of SOF ▲ local conflicts within the Military Demarcation Line(MDL) ▲ attacking friendly ships by submarines. Counter-measures currently established by the US involves the support from USFK and USFJ. In order to keep the sworn promise, the US is reinforcing both USFK and USFJ. An all-out war situation will be met by 'CFC OPLAN5027' and 'Tailored Expansion Deterrence Forces' with the CFC playing a central role. The US augmentation forces stands at 690,000 troops, some 160 ships, 2,000 aircraft and this comprise 50% of US total forces, which is estimated to be ninefold of Korean forces. The CFC needs to be in center in handling both local provocations and an all-out war situation. However, the combat power of S. Korean conventional forces is approximately around 80% of that of N. Korea, which has been confirmed from comments made by Kim, Gwan-Jin, Defense Minister, during an interpellation session at the National Assembly. This means that S. Korean forces are not much growing. In particular, asymmetric capabilities of the North is posing a serious threat to the South including WMD, cyber warfare forces, SOF, forces targeting 5 Northwestern Islands, sub-surface and amphibious assault forces. The presence of such threats urgently requires immediate complementary efforts. For complementary efforts, the Korean Government should consider ① reinforcement of Korean forces; putting a stoppage to shrinking military, acquisition of adequate defense budget, building a missile defense and military leadership structure validity review, ② implementation of military tasks against the North; disciplinary measures on the sinking of ROKS Cheon-an/shelling of Yeonpyeong Islands, arrangement of inter-Korean military agreements, drawing lessons from studies on the correlation between aid for N. Korea, execution of inter-Korean Summit and provocations from the North, and ③ bolstering the ROK·US alliance; disregarding wartime operational control transfer plan(disassembling of CFC) and creation of a combined division.

인체 하지부 근골격계 모델 및 의자에서 일어서는 동작 시 근력 예측 (A Musculoskeletal Model of a Human Lower Extremity and Estimation of Muscle Forces while Rising from a Seated Position)

  • 조영남;유홍희
    • 한국소음진동공학회논문집
    • /
    • 제22권6호
    • /
    • pp.502-508
    • /
    • 2012
  • An analytical model for a human body is important to predict muscle and joint forces. Because it is difficult to estimate muscle or joint forces from a human body, the objective of this study is the development of a reliable analytical model for a human body to evaluate the lower extremity muscle and joint forces. The musculoskeletal system of the human lower extremity is modeled as a multibody system employing the Hill-type muscle model. Muscle forces are determined to minimize energy consumption, and we assume that motion is constrained in the sagittal plane. Muscle forces are calculated through an equilibrium analysis while rising from a seated position. The musculoskeletal model consists of four segments. Each segment is a rigid body and connected by frictionless revolute joints. Muscles of the lower extremity are simplified to seven muscles with those that are not related to the sagittal plane motion are ignored. Muscles that play a similar role are combined together. The results of the present study are compared with experimental results to validate the lower extremity model and the assumptions of the present study.

혁신적 프리스트레스트 가시설(IPS)공법에 적용되는 띠장의 설계 및 해석 (Anlysis and Design of Wale in Innovative Prestressed Support(IPS) System)

  • 김성보;한만엽;김문영;김낙경;지태석
    • 한국전산구조공학회논문집
    • /
    • 제18권1호
    • /
    • pp.79-91
    • /
    • 2005
  • 본 논문에서는 프리스트레스를 이용한 가시설 공법(IPS)에 적용되는 띠장의 거동의 해석 및 설계절차에 대한 연구를 수행하였다. 띠장에 초기장력이 도입되는 구조계는 탄성지반위에 놓인 보이론에 의하여 부재력이 산출되고, 토압에 의한 부재력은 장력을 부정정력으로 취하여 부정정 구조해석을 통하여 띠장의 축력 및 휨모멘트를 계산하였다. 지반은 압축력 전담요소, 케이블은 인장력 전담요소를 사용하여 등분포 토압 및 편토압을 받는 띠장의 전산해석을 수행하였다. 기존의 가시설 설계에 적용되는 토압을 적용하여 IPS 띠장설계를 실시하였고, 긴장력과 설계토압에 의한 축력과 휨모멘트를 계산하여 축응력과 휨응력을 도출하고 합성응력검토를 수행하였다.

Experimental study of internal solitary wave loads on the semi-submersible platform

  • Zhang, Jingjing;Liu, Yi;Chen, Ke;You, Yunxiang;Duan, Jinlong
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • 제13권1호
    • /
    • pp.718-733
    • /
    • 2021
  • A prediction method, based on the Morison equation as well as Froude-Krylov formula, is presented to simulate the loads acting on the columns and caissons of the semi-submersible platform induced by Internal Solitary Wave (ISW) respectively. Combined with the experimental results, empirical formulas of the drag and inertia coefficients in Morison equation can be determined as a function of the Keulegan-Carpenter (KC) number, Reynolds number (Re) and upper layer depth h1/h respectively. The experimental and calculated results are compared. And a good agreement is observed, which proves that the present prediction method can be used for analyzing the ISW-forces on the semi-submersible platform. Moreover, the results also demonstrate the layer thickness ratio has a significant effect upon the maximum horizontal forces on the columns and caissons, but both minimum horizontal and vertical forces are scarcely affected. In addition, the incoming wave directions may also contribute greatly to the values of horizontal forces exerted on the caissons, which can be ignored in the vertical force analysis.

박판성형공정의 유한요소해석을 위한 드로우비드 전문모델 개발(2부: 모델링) (Development of Drawbead Expert Models for Finite Element Analysis of Sheet Metal Forming Processes(Part 2:Modeling))

  • 금영탁;이재우
    • 소성∙가공
    • /
    • 제7권1호
    • /
    • pp.12-22
    • /
    • 1998
  • An expert drawbead model is developed for the finite element analysis of stamping processes. The expert model calculates drawbead restraining forces and bead-exit thinnings with the forming condi-tions and drawbead size. The drawbead restraining forces and bead-exit thinnings of a circular draw-bead and stepped drawbead are computed by mathematical models and corrected by the multiple lin-ear regression method based on experimental measurements. The squared drawbead preventing the sheet from drawing-in inside die cavity is assumed to have a very huge drawbead restraining force and no pre-strain just after drawbead. The combined beads are considered as a combination of basic draw-beads such as circular a drawbead stepped drawbead and squared drawbead so that the drawbead restraining forces and bead-exit thinnigs are basically sum of those of basic drawbeads.

  • PDF

구조물의 연결부에서 전달함수합성법을 이용한 동응력 해석 (Dynamic Stress Analysis of Structural Connection using FRF-based Substructuring Method)

  • 공태식;김찬묵;이두호;서세영
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2002년도 춘계학술대회논문집
    • /
    • pp.1195-1201
    • /
    • 2002
  • Researches on the FRF-based substructuring method have been mainly focused on vibratory response analysis. Present study Is concerned about the application of the method to the dynamic stress analysis of a air-conditioner compressor mounting bracket in a passenger car. This is performed by using reaction forces that can be obtained by the FRF-based substructuring method. The air-conditioner system, composed of a compressor and bracket, Is analyzed by using the FRF-based substructuring method. The experimental and numerical FRFs are combined to calculate the system responses and reaction forces at the connection point. The dynamic reaction forces plugged into the bracket FE model to compute the stresses of the bracket Dynamic strains by the present method are compared with those from strain-gage test for bracket system on shaker. The comparison shows possibility of practical usage of the method for the real problem

  • PDF

고속철도 교량상의 장대레일 축력 해석 (Longitudinal Force Analysis of CWR on High Speed Rail Bridges)

  • 이지하;양신추;이종득
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 1998년도 창립기념 춘계학술대회 논문집
    • /
    • pp.556-563
    • /
    • 1998
  • Railway bridges have a significant effect on the stress and displacement of continuous welded rail(CWR). Longitudinal compression force at high temperature, combined breaking or acceleration forces can introduce track buckling. On the other hand, longitudinal tensile forces, associated with low temperatures, in combination with breaking forces may break rail. Therefore, it is very important to work out thorough counter measures for those problems, specially in high speed rail which high safety is required. The exact evaluation of longitudinal force of rail has the key to the solution. The main aim of the present paper is to examine whether the longitudinal force of CWR's on Kyung-Bu-HSR satisfy the criteria to be fulfilled in the design of railway bridge. The analyses are carried out by using "CWRAP" program which was developed by our research group. The ballast resistance and breaking force effects on the longitudinal force of CWR are investigated.

  • PDF

Use of elevator instruments when luxating and extracting teeth in dentistry: clinical techniques

  • Mamoun, John
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제43권3호
    • /
    • pp.204-211
    • /
    • 2017
  • In dentistry, elevator instruments are used to luxate teeth, and this technique imparts forces to tooth particles that sever the periodontal ligament around tooth roots inside the socket and expand alveolar bone around tooth particles. These effects can result in extraction of the tooth particles or facilitate systematic forceps extraction of the tooth particles. This article presents basic oral surgery techniques for applying elevators to luxate teeth. Determination of the optimal luxation technique requires understanding of the functions of the straight elevator and the Cryer elevator, the concept of purchase points, how the design elements of elevator working ends and tips influence the functionality of an elevator, application of forces to tooth particles, sectioning teeth at furcations, and bone removal to facilitate luxation. The effectiveness of tooth particle luxation is influenced by elevator tip shape and size, the magnitude and the vectors of forces applied to the tooth particle by the tip, and sectioning and bone removal within the operating field. Controlled extraction procedures are facilitated by a dental operating microscope or the magnification of binocular surgical loupes telescopes, combined with co-axial illumination.

반발식 자기부상열차의 정특성해석 (Static Characteristics of Electrodynamic Maglev System)

  • 홍순흠;이양수;차귀수;한송엽
    • 대한전기학회논문지
    • /
    • 제43권7호
    • /
    • pp.1067-1074
    • /
    • 1994
  • This paper deals with the combined levitation and guidance EDS(Electrodynamic Suspension) Maglev system. Levitation and guidance forces generated in figured-of-eight coil are examined. End effect of Superconducting magnets is considered in that the air gap flux has been calculated using the finite number of magnets. Induced emfs and currents of ground coils are given as results. Eletromagnetic forces vary according to the built-in position of magnets. Levitation forces of the first magnet pair are the smellest and those of the second one are the largest. This result shows that the end effect of SCMs should be considered in a concentrated magnet system.

  • PDF