• Journal of Korea Water Resources Association
• /
• v.56 no.2
• /
• pp.139-150
• /
• 2023

Terretial LiDAR surveying is highly useful for maintenance of civil facilities as it can easily detect the temporal deformation of structures or topography. However, for river facilities such as levess, it is difficult to detect the deformation of the topography or structure under vegetations due to the influence of vegetation. Vegetation filters can be divided into color filters and morphological filters. In this study, combined filters with color and morphology are developed to improve the accuracy of vegetation filters. 8 color filters, 6 morphological filters, and 4 combined filters are applied to the vegetation removal on the embankment slope, and their accuracy and calculation time are compared. Color filters show a short calculation time, but the accuracy was low in the vegetation area. Morphological filters show high accuracy in the vegetation area, but low accuracy in places with severe local topographical changes such as heavy rocks. Combined filters also show a tendency similar to morphological filters, but in the case of ExGGM, the accuracy is excellent in both the vegetation and rock area. Considering the accuracy and calculation time, the combined filter ExGGM is suitable for general cases, and the shape filter GrMIn or the complex filter ExGISL is suitable for cases where the local topographical change is not severe.

• Proceedings of the Optical Society of Korea Conference
• /
• 1990.02a
• /
• pp.248-251
• /
• 1990

A new CAD program for double E-plane bandpass filters is developed based on the variational analysis method and the passband correction method combined with the synthesis procedures. By taking the widths of three narrow waveguide equally, we can design bandpass filters with best stopband characteristics.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.6
• /
• pp.341-344
• /
• 2017

Infrared (IR) filters were developed to implement integrated three-dimensional (3D) image sensors that are capable of obtaining both color image and depth information at the same time. The combination of light filters applicable to the 3D image sensor is composed of a modified IR cut filter mounted on the objective lens module and on-chip filters such as IR pass filters and color filters. The IR cut filters were fabricated by inorganic $SiO_2/TiO_2$ multilayered thin-film deposition using RF magnetron sputtering. On-chip IR pass filters were synthetized by dissolving various pigments and dyes in organic solvents and by subsequent patterning with photolithography. The fabrication process of the filters is fairly compatible with the complementary metal oxide semiconductor (CMOS) process. Thus, the IR cut filter and IR pass filter combined with conventional color filters are considered successfully applicable to 3D image sensors.

• Journal of Korean Society of Water and Wastewater
• /
• v.13 no.3
• /
• pp.61-72
• /
• 1999

To obtain the experimental data for design and operation of actual filtration processes, a sand filter and three kinds of dual media filters in pilot-plant scale were operated in this study. We analyzed the effect of filter medium composition on the filter performance and the effects of backwash water flow rates, length of stream line and air flow rate on the filter backwash efficiency. We also compared the efficiencies of the combined air-water backwashing and the water backwashing in dual media filters. As the backwash water flow rates or the length of stream line increased, the final turbidity of backwash water was decreased and the filtration duration time after backwash was increased. In the case of the combined air-water backwashing, the backwash water quantity needed for backwashing the dual media filters could be decreased. The total volume of filtered water for the dual media filters during filter run was over three times larger than that for the sand filter. The dual media filters could be operated at a high filtration rate of 360 m/day.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.5
• /
• pp.258-264
• /
• 2006

This paper presents an integrative control scheme for series-type active power filters combined with shunt passive filters not only to compensate for the source voltage unbalance and current harmonics but also to correct the power factor. To reduce the power capacity of the active filters, passive filters are connected in parallel. Diode rectifiers are replaced by the PWM converters in order to feed the real power back to the source. Power factor control is performed by changing the phase of the load voltage so that the phase of the source current coincides with that of the source voltage. The resultant voltage reference is the addition of the voltage component compensating for the source voltage unbalance and harmonic currents and the voltage component correcting the power factor. The validity of the proposed algorithm has been verified by experimental results.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.11
• /
• pp.3507-3522
• /
• 2022

Model pruning methods have attracted huge attention owing to the increasing demand of deploying models on low-resource devices recently. Most existing methods use the weight norm of filters to represent their importance, and discard the ones with small value directly to achieve the pruning target, which ignores the contribution of the small norm filters. This is not only results in filter contribution waste, but also gives comparable performance to training with the random initialized weights [1]. In this paper, we point out that the small norm filters can harm the performance of the pruned model greatly, if they are discarded directly. Therefore, we propose a novel filter contribution recycle (FCR) method for structured model pruning to resolve the fore-mentioned problem. FCR collects and reassembles contribution from the small norm filters to obtain a mixed contribution collector, and then assigns the reassembled contribution to other filters with higher probability to be preserved. To achieve the target FLOPs, FCR also adopts a weight decay strategy for the small norm filters. To explore the effectiveness of our approach, extensive experiments are conducted on ImageNet2012 and CIFAR-10 datasets, and superior results are reported when comparing with other methods under the same or even more FLOPs reduction. In addition, our method is flexible to be combined with other different pruning criterions.

• Journal of Energy Engineering
• /
• v.5 no.2
• /
• pp.138-145
• /
• 1996

The particulate collection at high temperature and high pressure (HTHP) is important on the advanced coal power generation system not only to improve the thermal efficiency of the system, but also to prevent the gas turbine from erosion and to meet the emission limits of the effluent gas. The specifications for particulate collection in those systems such as Integrated Coal Gasification Combined Cycle (IGCC) and Pressurized Fluidized Bed Combustion (PFBC) require the absolutely high collection efficiency and reliability. Advanced cyclone, granular bed filter, electrostatic precipitator, and ceramic filter have been developed for particulate collection on the advanced coal power generation system. However, rigid ceramic filters and granular bed filter among them show the best potential. The current technology of these collectors was evaluated in this paper. The experienced problems of these systems on performance, materials, and mechanical design were investigated. Ceramic candle filters has the best potential for IGCC at this moment because it has nearly the highest efficiency comparing with other filtering systems and has accumulated many reliable design data resulted from many field experiences.

• Journal of Sensor Science and Technology
• /
• v.33 no.1
• /
• pp.48-55
• /
• 2024

Metal-oxide-based semiconductor gas sensors are widely used because of their advantages, such as high response and simple sensing mechanism. Recently, with the rapid progress in sensor networks, computing power, and microsystem technology, sensor applications are expanding to various fields, such as food quality control, environmental monitoring, healthcare, and artificial olfaction. Therefore, the development of highly selective gas sensors is crucial for practical applications. This article reviews the developments in novel sensor design consisting of sensing films and physical and chemical filters for highly selective gas sensing. Unlike conventional sensors, the sensor structures with filters can separate the sensing and catalytic reactions into independent processes, enabling selective and sensitive gas sensing. The main objectives of this study are directed at introducing the role of various filters in gas-sensing reactions and promising sensor applications. The highly selective gas sensors combined with a functional filter can open new pathways toward the advancement of high-performance gas sensors and electronic noses.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.66 no.3
• /
• pp.1-14
• /
• 2024

Gaining an accurate 3D stream geometry has become feasible with Unmanned Aerial Vehicle (UAV), which is crucial for better understanding stream hydrodynamic processes. The objective of this study was to investigate series of filters to remove stream vegetation and propose the best method for generating Digital Terrain Models (DTMs) using UAV-based point clouds. A stream reach approximately 500 m of the Bokha stream in Icheon city was selected as the study area. Point clouds were obtained in August 1st, 2023, using Phantom 4 multispectral and Zenmuse L1 for Structure from Motion (SfM) and Light Detection And Ranging (LiDAR) respectively. Three vegetation filters, two morphological filters, and six composite filters which combined vegetation and morphological filters were applied in this study. The Mean Absolute Error (MAE) and Root Mean Square Error (RMSE) were used to assess each filters comparing with the two cross-sections measured by leveling survey. The vegetation filters performed better in SfM, especially for short vegetation areas, while the morphological filters demonstrated superior performance on LiDAR, particularly for taller vegetation areas. Overall, the composite filters combining advantages of two types of filters performed better than single filter application. The best method was the combination of Progressive TIN (PTIN) and Color Indicies of Vegetation Extraction (CIVE) for SfM, showing the smallest MAE of 0.169 m. The proposed method in this study can be utilized for constructing DTMs of stream and thus contribute to improving the accuracy of stream hydrodynamic simulations.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.10
• /
• pp.81-89
• /
• 1996

In this paper, a very efficient CAD algorithm is proposedd where rhodes formulae combined with distributed lowpass prototype filter in order to design the corrugated waveguide harmonic rejection filters accurately. The proposed algorithm resolves effectively the problem of proximity effect without any optimiation or iterative design process by using the internally convexed corrugated structure. A 13-section tapered corrugated lowpass filter has been designed by the proposed algorithm and fabricated. The experimental results are in good agreement with the calculated results.