• 한국전기전자재료학회논문지
• /
• 제13권1호
• /
• pp.6-12
• /
• 2000

In this study, molybdenum thin films were etched with Cl\ulcorner/(Cl\ulcorner+SF\ulcorner) gas mixing ratio in an magneti-cally enhanced reactive ion etching(MERIE) by the etching parameters such as rf power of 250 watts, chamber pressure of 100 mTorr and B-field of 30 gauss. The etch rate was 150nm/min under Cl\ulcorner/(Cl\ulcorner+SF\ulcorner) gas mixing ratio of 0.25. At this time, the selectivity of Mo to SiO\ulcorner, photoresist were respectively 0.94, 0.05. The surface reaction of the etched Mo thin films was investigated with X-ray photoelectron spectroscopy(XPS). It was analyzed that Mo peaks was mainly observed in Mo-O bonds formed MoO\ulcorner compounds and F was detected in Mo-F and O-F bonds. Cl peaks were detected by the peak of Cl 2p\ulcorner in Cl-Mo bonds of MoCl\ulcorner or MoO\ulcornerCl\ulcorner formulas. Almost all of both Cl and S atoms had been com-bined with Mo, respectively.

• 한국전기전자재료학회논문지
• /
• 제13권1호
• /
• pp.52-59
• /
• 2000

In order to develop the transparent anti-static film with higher than 80% transparency to visible light, organic conductive compounds, N-methyl phenazinium 7,7,8,8-tetracyanoquinonedimethane (TCNQ) com-plex salts was synthesized and bar-coated on the polythylene terephthalate (PET) film using polymer binders. The best surface properties were obtained when acrylic binder was used. A single layer of TCNQ made of a acrylic binder showed a surface resistance of 10\ulcorner $\Omega$/ , a conductivity of 10\ulcorner S/cm, and a transparency of 75%. An optical microscopic examination revealed that the binder was first solidi-fied on the surface of PET film over which the needle-shaped TCNQ crystals were grown. An acrylic polyol coating over the TCNQ layer improved the transparency to 87%, becuase the acrylic polyol covers the surface of TCNQ crystals to reduce the surface roughness. This conductive material has thermal stability at room temperature and 4$0^{\circ}C$ over 4,000 h.

• Journal of Chest Surgery
• /
• 제30권1호
• /
• pp.103-107
• /
• 1997

A very rare case of mycotic aneurysm in the descending thoracic aorta due to salmonellosis was treated in our hospital The patient was a 62 year-old male who 48 days before the operation was admitted to the depart,cent of internal medicine complaining of fever. nausla. vomiting, and loose stool. He was treated for 35 days and discharged. Three days after discharge, however, the patient was readmitted to the hospital comE긴ainin프 of $\ulcorner$i포ht uppe$\ulcorner$ 킥uadrant abdominal pain. Fever developed on the third hospiti린 day, and on the eighth hospital day, the patient complAined of back pain and epigastric pale. A simple chest x-ray showed evidence of hemothorax in the left plueral space, and therefore, computed tomography of the chest was done. The patient was diagnosed as a ruptured mycotic aneurysm of the descending thoracic aorta, and was transferred to our Department of Thoracic and CArdiovascular Surgery. The aneurysm and infected tissues was widely debrided, and the site was then patched with a Dacron graft. Salmonella choleraesuis was identified in the blood and aneurysm cultures, and antibiotics were administered for weeks according to the sensitivity of the organism. The patient experienced no complication thereafter and for the last three months since the operation, he has been leading a healthy and normal social life.

• Spatial Information Research
• /
• 제8권1호
• /
• pp.15-29
• /
• 2000

최근 급변하는 기술환경에서 향상된 정보서비스를 제공하기 위하여 지자체 또는 중앙정부차원에서 막대한 예산을 투입하여 GIS를 활용한 행정업무의 전산화를 추진하고 있거나 추진할 예정이다. 이러한 시점에서 예산의 중복투자 방지, 기 투자재원리 재활용을 극대화한다는 측면에서 행정업무 전산화의 특징을 살펴 행정업무 전산화사업에 있어서 GIS 응용 컴포넌트의 도입 가능성을 검토하고자한다. 본 연구서는 정보통신부 주관사업인 「개방형 GIS 컴포넌트 S/W 개발」 프로젝트에서 토지민원서비스 응용 컴포넌트를 개발하였다. GIS 응용컴포넌트는 OpenGIS의 OLE/COM 기반으로 만들어지며, 그 개발방법으로는 USD (Unified System Development), 시스템설계는 UML(Unified Modeling Language), 컴포넌트의 구현은 Visual C++를 이용하였다. 구현된 컴포넌트들은 Process Control, Map, Print, Statistics 컴포넌트들로서 Visual Basic 과 Delphi를 이용하여 구현된 컴포넌트를 검증하였다. 본 연구의 결과 컴포넌트의 개발이 지자체의 GIS 업무개발에 매우 유용하게 활용될 것으로 판단된다. 그러나 업무활용의 극대화를 위해서는 업무, 자료, 시스템의 표준화가먼저 선행되어야 할 것으로 보인다.

• 한국자동차공학회논문집
• /
• 제7권6호
• /
• pp.123-134
• /
• 1999

Nowadays since the automobile is regarded as the third living space, comfortable conditions are required in the passenger compartment. The customer's concern on air-conditioning/heating, ventilation and demisting/defrosting performances has been much increased. Both ventilation and demisting /defrosting performances are directly influenced by register location, shape of regist guide vane, ventilation flow rate, air distribution , and air circulation pattern. Diffuse plume of air from the register is desirable not only to maintain comfort when the comfort when the comfortable condition has been satisfied but to improve demisting /defrosting performance. In this study, experimental and numerical investigation about the flow field of six different register vane types were carried out , respectively. The numerical analysis, based upon the $textsc{k}$-$\varepsilon$ turbulence model , was applied to the air flow field. The results show that the shape of register guide vane should be considered as an important design paramter.

• 한국의류학회지
• /
• 제23권3호
• /
• pp.361-372
• /
• 1999

The main objectives of this study were to investigate the characteristics of clothing buying behavior under the refund policy of stores (CCBBURPS) and the influence variables on CCBBURPS and to build the model of CCBBURPS. Additionally frequency and reasons for refund were researched. The interviews with 26 subjects the reviews of previous studies and the empirical investigation were processed for the study. The data was collected from 163 Korean females living in U.S. and analyzed by frequency mean factor analysis {{{{ chi ^2 }}-test, t-test and regression. The following results were found : the easyness of decision making (EDM) the loyalty of refund policy store (LRPS) and the increase of buying (IB) were found as the characteristics of clothing buying behaviors under the refund policy. EDM, LRPS and IB were influenced by clothing attitudes-shopping involvement and perceived buying risk-. The frequency of refund with 10 purchases was usually 0~1 times(38.7%) or 1~2 times (38.7%) The reasons for refund were : size unflattering appearance design com\ulcorner. The model of CCBBURPS was built based on the above findings(fig. 1)

• Journal of Chest Surgery
• /
• 제29권10호
• /
• pp.1090-1094
• /
• 1996

연세대학교 심장혈관센터에서는 1980년 2월부터 1995년 9월까지 승모판질환을 가진 2개월부터 15세 가지의 소아환자 31명에게 승모판치환술을 시행하였다. 이중 추적조사가 가능했던 환자는 28명이었으며, 남아는 10명, 여아는 18명이었고, 체중은 4.9kg부터 5.6kg까지 였다. 조기사망은 2례(7.1%)에서 발생하였고, 이들은 모두 1세이하의 영아였으나, 각 연령군사이의 사망률은 통계학적으로 의미 있는 차이는 없었다(p=0.13). 5세이하의 소아에서 판막과 관련된 합병증률은 57.1%였으며, 다른 연령군에 비해 승모판치환술후 높은 합병증률을 보여주었다(p<0.05). 조직 판막을 사용하였던 소아환자는 모두 7명이며, 그들의 판막실패 없는 5년 생존률은 50%이었다. 기계 판막을 사용하였던 나머지 21명의 환자에서 아직 판막실패는 발생하지 않았다. 조직 판막의 높은 재치환률을 생각해볼 때, 기계판막은 항응고제가 필요하고, 출혈과 혈전색 전증 가능성 이 있지만, 내구성 이 짧은 조직판막보다는 좋다. 그러나, 자라나는 심장내에 장기간 삽입된 기계판막은 성장함에 따라 재치 환술을 필요로 할 것으로 생각된다. 소아에서의 승모판치환술은 만족할 만한 장기\ulcorner적을 보여주고 있지만, 사망률과 합병증률에 영향을 미치는 중요한 요소는 소아의 연령이다. 특히 5세이하의 환아에서는 승모판치환술시 세심한 주의를 요한다.

• 한국식품조리과학회지
• /
• 제14권5호
• /
• pp.560-565
• /
• 1998

The purpose of this study was to investigate any differences in the efficiency of various antioxidants for the three types of substrates such as corn oil in water (O/W) emulsion, water in com oil (W/O) emulsion, and bulky corn oil. ${\alpha}$-Tocopherol (${\alpha}$-Toc) at 0.01 or 0.02%, ascorbic acid (AsA), ascorbyl palmitate (AP), and BHT at 0.02% were added separately to the prepared O/W emulsion, W/O emulsion, and bulk oil, and their antioxidative effects were compared. The mixture of ${\alpha}$-Toc ind AsA or AP at the level of 0.02% also was tested to observe any synergistic effect. Oxidation was made by storing at 42${\pm}$1$^{\circ}C$ for 25 days and the oxidative stability was determined by peroxide value and conjugated dienoic acid with time fluctuation of storage. The results were as follows: 1. In case of O/W emulsion, the order of antioxidative effect was AP> ${\alpha}$-Toc+AP>${\alpha}$-Toc+AsA>AsA>BHT. 2. In case of W/O emulsion, the order of antioxidative effect was AsA>AP>${\alpha}$-Toc+AsA>BHT. ${\alpha}$-Toc+AP mixture showed the prooxidant effect rather than synergistic effect. 3. In case of bulk oil, the order of antioxidative effect was AsA>AP>${\alpha}$-Toc+AsA>${\alpha}$-Toc+AP\ulcornerBHT. Therefore, AsA, a hydrophilic antioxidant, was more effective in W/O emulsion system than in O/W emulsion system, while the opposite trend was found in AP, a lipophilic antioxidant. AsA, a hydrophilic antioxidant, was more efficient in bulk oil of anhydrous substrate. ${\alpha}$-Toc showed prooxidant effects in all substrates.

• 한국가정과교육학회지
• /
• 제18권2호
• /
• pp.15-27
• /
• 2006

이 연구는 ICT 활용 수업을 적극 권장하는 교육현장에 부응하기 위해 고등학교 1학년 $\ulcorner$기술 가정$\lrcorner$ 교과 중 주생활과 관련된 $\ulcorner$나의 주거공간 꾸미기$\lrcorner$ 단원을 중심으로 ICT를 활용한 차시별 교수 학습 과정안을 개발하여 기술 가정 교과시간에 적용한 후 ICT 활용 교수 학습의 교육적 효과를 알아본 것이다. 이 연구를 수행하기 위하여 기술 가정 교과 수업에서 학생들이 모둠학습 및 개별학습이 가능한 ICT 교수 학습 과정안 8차시 분을 개발하고, 이를 효율적으로 활용하기 위하여 홈페이지를 제작하였다. ICT 활용 교수 학습의 교육적 효과를 검증하기 위하여 교사 중심의 강의식 교수 방법으로 수업한 비교집단과 ICT를 활용하여 수업을 전개한 실험집단을 대상으로 주생활 내용 이해 정도와 흥미유발 정도를 사전 사후, 실습결과물은 사후에 비교평가 하였다. ICT 활용 교수 학습 과정안의 수업 적용 및 결과 분석을 위한 연구 대상은 경기도 광명시에 위치한 K고(인문계 고등학교) 1학년 남학생 136명으로 동질성 검증을 거쳐 선정된 4학급을 각 2개 학급씩 실험집단과 비교집단으로 구분하여 2003년 9월 4일부터 9월 26일까지 총 8차시에 걸쳐 50분 단위의 교수 학습을 전개하였다. 실험집단의 경우에는 본 연구자가 제작한 인터넷 홈페이지에 ICT 활용 교수 학습 과정안을 탑재하여 교수 학습을 진행하였고, 비교집단은 기존에 연구자가 사용하던 강의식 수업을 하였다. 이 연구 결과는 첫째, ICT를 활용한 교수 학습 과정안을 개발하고 이를 바탕으로 실제 수업에 활용할 수 있는 홈페이지(홈페이지명: 쾌적하고 아름다운 공간)를 제작한 것이다. 홈페이지(ieduhome.cafe.com)에는 교수 학습 과정안, 학습자료방, 과제 제출방, 종합 평가방, 질문과 답변 등 5가지 주메뉴를 두었다. ICT를 활용한 교수 학습 과정안은 왕석순의 일반모형을 토대로 하여 교과내용 5차시 분과 실습, 3차시분을 포함한 총 8차시를 개발하여 홈페이지 교수 학습 과정안에 한글파일 및 플래시 지도안으로 탑재하여 가정과 교사가 수업할 때 수업자료 및 지도안을 즉시 수업에 투입할 수 있도록 하였다. 둘째, 이 연구에서 개발한 ICT 활용 교수학습과정안을 중심으로 홈페이지를 활용하여 교수학습한 결과, 두 방법 모두 주생활 단원 학습내용에 대한 지식이해 정도를 높였으나 일반 교수학습안보다 ICT 활용 교수학습을 실행한 경우가 더 효과적이었다. 가정교과와 주생활 및 인터넷 활용 학습에 대한 흥미도는 비교집단에서는 사전 사후에 유의한 차이가 나타나지 않았으나 실험집단에서는 모든 측면의 흥미도에서 사전 사후에 유의한 차이가 나타나 ICT 활용 교수학습이 학생들의 주생활 단원 흥미도는 물론 가정교과 흥미도와 나아가 인터넷 활용 학습에 대한 흥미도를 증진시킨다는 것을 알 수 있었다. 미래에 내가 살고 싶은 집 꾸미기 실습 결과물을 교과 담당 교사 3인이 객관적 기준에 따라 평가한 평균점수는 실험집단이 비교집단보다 다소 높았으나 그 차이가 통계적으로 유의하게 나타나지는 않았다. 이 연구결과에 ICT활용 교수학습이 학습한 내용에 대한 지식이해 뿐만 아니라 이를 적용하는 실습, 그리고 학습내용단원과 나아가 기술 가정 교과에 대한 흥미도를 더 높였다는 점은 기술 가정 교과에 시사하는 바가 크다고 본다. 더구나 ICT 활용 수업을 함으로써 학생들의 ICT 활용 학습에 대한 흥미를 진작시킬 수 있음을 볼 때 가정교과에서 ICT 활용 교수학습안을 다양한 주제로 개발하고 현장에 적응하는 후속연구가 뒤따라야 할 것을 제안한다. ICT 활용 교수학습은 이 연구에서처럼 개인 교사의 홈페이지를 개설하여 구축할 수도 있겠다. 대부분 학교에서 개발해 놓은 학교 홈페이지의 웹기반 학습환경을 이용할 수도 있을 것이다.

• E2M - 전기 전자와 첨단 소재
• /
• 제12권7호
• /
• pp.7-11
• /
• 1999

Fully sealed field emission display in size of 4.5 inch has been fabricated using single-wall carbon nanotubes-organic vehicle com-posite. The fabricated display were fully scalable at low temperature below 415$^{\circ}C$ and CNTs were vertically aligned using paste squeeze and surface rubbing techniques. The turn-on fields of 1V/${\mu}{\textrm}{m}$ and field emis-sion current of 1.5mA at 3V/${\mu}{\textrm}{m}$ (J=90${\mu}{\textrm}{m}$/$\textrm{cm}^2$)were observed. Brightness of 1800cd/$m^2$ at 3.7V/${\mu}{\textrm}{m}$ was observed on the entire area of 4.5-inch panel from the green phosphor-ITO glass. The fluctuation of the current was found to be about 7% over a 4.5-inch cath-ode area. This reliable result enables us to produce large area full-color flat panel dis-play in the near future. Carbon nanotubes (CNTs) have attracted much attention because of their unique elec-trical properties and their potential applica-tions [1, 2]. Large aspect ratio of CNTs together with high chemical stability. ther-mal conductivity, and high mechanical strength are advantageous for applications to the field emitter [3]. Several results have been reported on the field emissions from multi-walled nanotubes (MWNTs) and single-walled nanotubes (SWNTs) grown from arc discharge [4, 5]. De Heer et al. have reported the field emission from nan-otubes aligned by the suspension-filtering method. This approach is too difficult to be fully adopted in integration process. Recently, there have been efforts to make applications to field emission devices using nanotubes. Saito et al. demonstrated a car-bon nanotube-based lamp, which was oper-ated at high voltage (10KV) [8]. Aproto-type diode structure was tested by the size of 100mm $\times$ 10mm in vacuum chamber [9]. the difficulties arise from the arrangement of vertically aligned nanotubes after the growth. Recently vertically aligned carbon nanotubes have been synthesized using plasma-enhanced chemical vapor deposition(CVD) [6, 7]. Yet, control of a large area synthesis is still not easily accessible with such approaches. Here we report integra-tion processes of fully sealed 4.5-inch CNT-field emission displays (FEDs). Low turn-on voltage with high brightness, and stabili-ty clearly demonstrate the potential applica-bility of carbon nanotubes to full color dis-plays in near future. For flat panel display in a large area, car-bon nanotubes-based field emitters were fabricated by using nanotubes-organic vehi-cles. The purified SWNTs, which were syn-thesized by dc arc discharge, were dispersed in iso propyl alcohol, and then mixed with on organic binder. The paste of well-dis-persed carbon nanotubes was squeezed onto the metal-patterned sodalime glass throuhg the metal mesh of 20${\mu}{\textrm}{m}$ in size and subse-quently heat-treated in order to remove the organic binder. The insulating spacers in thickness of 200${\mu}{\textrm}{m}$ are inserted between the lower and upper glasses. The Y\ulcornerO\ulcornerS:Eu, ZnS:Cu, Al, and ZnS:Ag, Cl, phosphors are electrically deposited on the upper glass for red, green, and blue colors, respectively. The typical sizes of each phosphor are 2~3 micron. The assembled structure was sealed in an atmosphere of highly purified Ar gas by means of a glass frit. The display plate was evacuated down to the pressure level of 1$\times$10\ulcorner Torr. Three non-evaporable getters of Ti-Zr-V-Fe were activated during the final heat-exhausting procedure. Finally, the active area of 4.5-inch panel with fully sealed carbon nanotubes was pro-duced. Emission currents were character-ized by the DC-mode and pulse-modulating mode at the voltage up to 800 volts. The brightness of field emission was measured by the Luminance calorimeter (BM-7, Topcon).