• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.1
• /
• pp.6-12
• /
• 2000

In this study, molybdenum thin films were etched with Cl\ulcorner/(Cl\ulcorner+SF\ulcorner) gas mixing ratio in an magneti-cally enhanced reactive ion etching(MERIE) by the etching parameters such as rf power of 250 watts, chamber pressure of 100 mTorr and B-field of 30 gauss. The etch rate was 150nm/min under Cl\ulcorner/(Cl\ulcorner+SF\ulcorner) gas mixing ratio of 0.25. At this time, the selectivity of Mo to SiO\ulcorner, photoresist were respectively 0.94, 0.05. The surface reaction of the etched Mo thin films was investigated with X-ray photoelectron spectroscopy(XPS). It was analyzed that Mo peaks was mainly observed in Mo-O bonds formed MoO\ulcorner compounds and F was detected in Mo-F and O-F bonds. Cl peaks were detected by the peak of Cl 2p\ulcorner in Cl-Mo bonds of MoCl\ulcorner or MoO\ulcornerCl\ulcorner formulas. Almost all of both Cl and S atoms had been com-bined with Mo, respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.1
• /
• pp.52-59
• /
• 2000

In order to develop the transparent anti-static film with higher than 80% transparency to visible light, organic conductive compounds, N-methyl phenazinium 7,7,8,8-tetracyanoquinonedimethane (TCNQ) com-plex salts was synthesized and bar-coated on the polythylene terephthalate (PET) film using polymer binders. The best surface properties were obtained when acrylic binder was used. A single layer of TCNQ made of a acrylic binder showed a surface resistance of 10\ulcorner $\Omega$/ , a conductivity of 10\ulcorner S/cm, and a transparency of 75%. An optical microscopic examination revealed that the binder was first solidi-fied on the surface of PET film over which the needle-shaped TCNQ crystals were grown. An acrylic polyol coating over the TCNQ layer improved the transparency to 87%, becuase the acrylic polyol covers the surface of TCNQ crystals to reduce the surface roughness. This conductive material has thermal stability at room temperature and 4$0^{\circ}C$ over 4,000 h.

• Journal of Chest Surgery
• /
• v.30 no.1
• /
• pp.103-107
• /
• 1997

A very rare case of mycotic aneurysm in the descending thoracic aorta due to salmonellosis was treated in our hospital The patient was a 62 year-old male who 48 days before the operation was admitted to the depart,cent of internal medicine complaining of fever. nausla. vomiting, and loose stool. He was treated for 35 days and discharged. Three days after discharge, however, the patient was readmitted to the hospital comE긴ainin프 of $\ulcorner$i포ht uppe$\ulcorner$ 킥uadrant abdominal pain. Fever developed on the third hospiti린 day, and on the eighth hospital day, the patient complAined of back pain and epigastric pale. A simple chest x-ray showed evidence of hemothorax in the left plueral space, and therefore, computed tomography of the chest was done. The patient was diagnosed as a ruptured mycotic aneurysm of the descending thoracic aorta, and was transferred to our Department of Thoracic and CArdiovascular Surgery. The aneurysm and infected tissues was widely debrided, and the site was then patched with a Dacron graft. Salmonella choleraesuis was identified in the blood and aneurysm cultures, and antibiotics were administered for weeks according to the sensitivity of the organism. The patient experienced no complication thereafter and for the last three months since the operation, he has been leading a healthy and normal social life.

• Spatial Information Research
• /
• v.8 no.1
• /
• pp.15-29
• /
• 2000

In the Recent rapidly changing technology environment the computerization of administration business which is driven or will be driven to give improved information services to people by local government or central government with a huge budget. The possibility of applying GIS application component to the computerization of administration business is investigated to prevent local government from investing redundant money and to reuse the existing investment at this point of time. Land civil service application component was developed at the $\ulcorner Development of Open GIS Component S/W \lrcorner$ project which was managed by Ministry of Information and Communication . GIS application component was based on Open GIS OLE/COM specification for development of standard interface and USD(Unified System Development ) for development method and UML (Unified Modeling Language) for system design and Visual C++ for component implementation. Implemented components were Process Control, Map, Print, Statistics component and were verified by using Visual Basic and Delhi. tis study shows that the development of component is very useful at the GIS application development for local governments. But the standard of business and data and system is the essential prerequisite to maximize business application.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.6
• /
• pp.123-134
• /
• 1999

Nowadays since the automobile is regarded as the third living space, comfortable conditions are required in the passenger compartment. The customer's concern on air-conditioning/heating, ventilation and demisting/defrosting performances has been much increased. Both ventilation and demisting /defrosting performances are directly influenced by register location, shape of regist guide vane, ventilation flow rate, air distribution , and air circulation pattern. Diffuse plume of air from the register is desirable not only to maintain comfort when the comfort when the comfortable condition has been satisfied but to improve demisting /defrosting performance. In this study, experimental and numerical investigation about the flow field of six different register vane types were carried out , respectively. The numerical analysis, based upon the $textsc{k}$-$\varepsilon$ turbulence model , was applied to the air flow field. The results show that the shape of register guide vane should be considered as an important design paramter.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.3
• /
• pp.361-372
• /
• 1999

The main objectives of this study were to investigate the characteristics of clothing buying behavior under the refund policy of stores (CCBBURPS) and the influence variables on CCBBURPS and to build the model of CCBBURPS. Additionally frequency and reasons for refund were researched. The interviews with 26 subjects the reviews of previous studies and the empirical investigation were processed for the study. The data was collected from 163 Korean females living in U.S. and analyzed by frequency mean factor analysis {{{{ chi ^2 }}-test, t-test and regression. The following results were found : the easyness of decision making (EDM) the loyalty of refund policy store (LRPS) and the increase of buying (IB) were found as the characteristics of clothing buying behaviors under the refund policy. EDM, LRPS and IB were influenced by clothing attitudes-shopping involvement and perceived buying risk-. The frequency of refund with 10 purchases was usually 0~1 times(38.7%) or 1~2 times (38.7%) The reasons for refund were : size unflattering appearance design com\ulcorner. The model of CCBBURPS was built based on the above findings(fig. 1)

• Journal of Chest Surgery
• /
• v.29 no.10
• /
• pp.1090-1094
• /
• 1996

From February 1980 to September 1995, 31 children between 2 months and 15 years of age with mitral valve disease have undergone mitral valve replacement(MVR) at Yonsei Cardiovascular Center and com- plete follow-up has been obtained on 28 patients. There were 10 males and 18 females whose weight ranged from 4.9kg to 56kg. Two patients died early postopeiatively and the overall hospital mortality rate was 7.1%. These two were infants but there were no statistically significant difference in overall mortality among the age groups(p=0.13). The valve related complication rate was 57.1% in children younger than 5 years of age, which showed higher complication rate compared to older patients(p< 0.05). The bioprosthetic valve have been applied in 7 patients, and its 5-year valve failure-free survival rate was 50% . No mechanical valve failu e had occurred in 21 patients. In considering high re-replacement rate of bioprosthetic valve, mechanical valve is recommended despite its possibility of bleeding and thromboembolic complications. However, the consequences of increasing body size and long-term interposition of a rigid prosthesis in a growing heart will require second valve replacement. En conclusion, mitral valve replacement can be performed tilth satisfactory long-term survival in children, although younger mean age of the children has an important influence on early mortality and com- plication rate. And therefore mitral valve replacement in children younger than 5 years of age needs special consideration.

• Korean journal of food and cookery science
• /
• v.14 no.5
• /
• pp.560-565
• /
• 1998

The purpose of this study was to investigate any differences in the efficiency of various antioxidants for the three types of substrates such as corn oil in water (O/W) emulsion, water in com oil (W/O) emulsion, and bulky corn oil. ${\alpha}$-Tocopherol (${\alpha}$-Toc) at 0.01 or 0.02%, ascorbic acid (AsA), ascorbyl palmitate (AP), and BHT at 0.02% were added separately to the prepared O/W emulsion, W/O emulsion, and bulk oil, and their antioxidative effects were compared. The mixture of ${\alpha}$-Toc ind AsA or AP at the level of 0.02% also was tested to observe any synergistic effect. Oxidation was made by storing at 42${\pm}$1$^{\circ}C$ for 25 days and the oxidative stability was determined by peroxide value and conjugated dienoic acid with time fluctuation of storage. The results were as follows: 1. In case of O/W emulsion, the order of antioxidative effect was AP> ${\alpha}$-Toc+AP>${\alpha}$-Toc+AsA>AsA>BHT. 2. In case of W/O emulsion, the order of antioxidative effect was AsA>AP>${\alpha}$-Toc+AsA>BHT. ${\alpha}$-Toc+AP mixture showed the prooxidant effect rather than synergistic effect. 3. In case of bulk oil, the order of antioxidative effect was AsA>AP>${\alpha}$-Toc+AsA>${\alpha}$-Toc+AP\ulcornerBHT. Therefore, AsA, a hydrophilic antioxidant, was more effective in W/O emulsion system than in O/W emulsion system, while the opposite trend was found in AP, a lipophilic antioxidant. AsA, a hydrophilic antioxidant, was more efficient in bulk oil of anhydrous substrate. ${\alpha}$-Toc showed prooxidant effects in all substrates.

• Journal of Korean Home Economics Education Association
• /
• v.18 no.2 s.40
• /
• pp.15-27
• /
• 2006

The purpose of this research was to develop and analyze the effects of ICT based teaching learning process plans for 'Designing My Home' unit of Technology Home Economics subject in High School. The seven housing contents were selected from 8 textbooks and 8 teaching resources at the analyses stage. A specific homepage(ieduhome.cafe.com) was built to utilize the eight ICT teaching learning process plan as well as many other resources at the planning & development stages. The number of 68 highschool students have participated for the application stage during September 4-26, 2003 and the same number have studied the same contents through regular teaching learning plans as a comparison group. Experimental groups have significantly more increased in the knowledge and understanding of the housing contents than have comparison groups. The same results occurred in the interests in Home Economics, Housing, and Internet utilized study. The Design reports were not statistically differed between two groups based on the objective evaluation criteria. The results of this study generally supported previous research and showed that the In teaching learning plans were more effective in various aspects than were the regular plans.

• Electrical & Electronic Materials
• /
• v.12 no.7
• /
• pp.7-11
• /
• 1999

Fully sealed field emission display in size of 4.5 inch has been fabricated using single-wall carbon nanotubes-organic vehicle com-posite. The fabricated display were fully scalable at low temperature below 415$^{\circ}C$ and CNTs were vertically aligned using paste squeeze and surface rubbing techniques. The turn-on fields of 1V/${\mu}{\textrm}{m}$ and field emis-sion current of 1.5mA at 3V/${\mu}{\textrm}{m}$ (J=90${\mu}{\textrm}{m}$/$\textrm{cm}^2$)were observed. Brightness of 1800cd/$m^2$ at 3.7V/${\mu}{\textrm}{m}$ was observed on the entire area of 4.5-inch panel from the green phosphor-ITO glass. The fluctuation of the current was found to be about 7% over a 4.5-inch cath-ode area. This reliable result enables us to produce large area full-color flat panel dis-play in the near future. Carbon nanotubes (CNTs) have attracted much attention because of their unique elec-trical properties and their potential applica-tions [1, 2]. Large aspect ratio of CNTs together with high chemical stability. ther-mal conductivity, and high mechanical strength are advantageous for applications to the field emitter [3]. Several results have been reported on the field emissions from multi-walled nanotubes (MWNTs) and single-walled nanotubes (SWNTs) grown from arc discharge [4, 5]. De Heer et al. have reported the field emission from nan-otubes aligned by the suspension-filtering method. This approach is too difficult to be fully adopted in integration process. Recently, there have been efforts to make applications to field emission devices using nanotubes. Saito et al. demonstrated a car-bon nanotube-based lamp, which was oper-ated at high voltage (10KV) [8]. Aproto-type diode structure was tested by the size of 100mm $\times$ 10mm in vacuum chamber [9]. the difficulties arise from the arrangement of vertically aligned nanotubes after the growth. Recently vertically aligned carbon nanotubes have been synthesized using plasma-enhanced chemical vapor deposition(CVD) [6, 7]. Yet, control of a large area synthesis is still not easily accessible with such approaches. Here we report integra-tion processes of fully sealed 4.5-inch CNT-field emission displays (FEDs). Low turn-on voltage with high brightness, and stabili-ty clearly demonstrate the potential applica-bility of carbon nanotubes to full color dis-plays in near future. For flat panel display in a large area, car-bon nanotubes-based field emitters were fabricated by using nanotubes-organic vehi-cles. The purified SWNTs, which were syn-thesized by dc arc discharge, were dispersed in iso propyl alcohol, and then mixed with on organic binder. The paste of well-dis-persed carbon nanotubes was squeezed onto the metal-patterned sodalime glass throuhg the metal mesh of 20${\mu}{\textrm}{m}$ in size and subse-quently heat-treated in order to remove the organic binder. The insulating spacers in thickness of 200${\mu}{\textrm}{m}$ are inserted between the lower and upper glasses. The Y\ulcornerO\ulcornerS:Eu, ZnS:Cu, Al, and ZnS:Ag, Cl, phosphors are electrically deposited on the upper glass for red, green, and blue colors, respectively. The typical sizes of each phosphor are 2~3 micron. The assembled structure was sealed in an atmosphere of highly purified Ar gas by means of a glass frit. The display plate was evacuated down to the pressure level of 1$\times$10\ulcorner Torr. Three non-evaporable getters of Ti-Zr-V-Fe were activated during the final heat-exhausting procedure. Finally, the active area of 4.5-inch panel with fully sealed carbon nanotubes was pro-duced. Emission currents were character-ized by the DC-mode and pulse-modulating mode at the voltage up to 800 volts. The brightness of field emission was measured by the Luminance calorimeter (BM-7, Topcon).