• 제목/요약/키워드: Column type

검색결과 1,208건 처리시간 0.026초

인도네시아 전통주택의 의장 특성에 관한연구 - 자바주택을 중심으로 - (The Characteristic of Decoration in Indonesian Traditional House - Focused Javanese Hous -)

  • 김도연;주서령;오혜경
    • 한국주거학회논문집
    • /
    • 제25권6호
    • /
    • pp.111-121
    • /
    • 2014
  • The purpose of the study is to understand the unique characteristics of decoration style in traditional Javanese houses. Reviewing literature and visiting site were applied as the research method. Javanese House can be divided into three parts; roof, wall and floor. First, the roof of the traditional Javanese House is the most unique and important decorative element. The roofs are covered with roof-tiles and have clay carving ornaments on top. Usually there are no ceilings, just exposed to the oblique shape roof, which are made of wood to enable air ventilation. Joglo roof is the outstanding and representative roof type of Javanese houses. There is artistic and constructive roof structure named as tumpang sari in Joglo roof. The decoration on tumpang sari is the most colorful and symbolic ornaments. Secondly, the most unique element in the wall is the gebyok. Gebyok is made of wood and full of carved ornament, which has an artistic appearance, and also important function. The top part of doors are designed as perforated woodcarving, which give both aesthetic and ventilation purposes. Last, the stratified floor is begin with ground yard, then veranda that made from hardened clay, and main room constituted with a wood scaffold to provide air circulation and remove the humidity of the ground. The decorations of the column stand (umpak) are unique, where usually lotus flower is carved into black stone or lime stone. The outside of the buildings in Java Houses is not decorated by colors or symbols, whereas colors are only used in temples, pavilion or in royal housings. Instead they have carvings and decorations on important structural elements such as columns and beams inside. The ornaments and colors of decorations symbolize their god, ancestors and piece.

Biocontrol of Orchid-pathogenic Mold, Phytophthora palmivora, by Antifungal Proteins from Pseudomonas aeruginosa RS1

  • Sowanpreecha, Rapeewan;Rerngsamran, Panan
    • Mycobiology
    • /
    • 제46권2호
    • /
    • pp.129-137
    • /
    • 2018
  • Black rot disease in orchids is caused by the water mold Phytophthora palmivora. To gain better biocontrol performance, several factors affecting growth and antifungal substance production by Pseudomonas aeruginosa RS1 were verified. These factors include type and pH of media, temperature, and time for antifungal production. The results showed that the best conditions for P. aeruginosa RS1 to produce the active compounds was cultivating the bacteria in Luria-Bertani medium at pH 7.0 for 21 h at $37^{\circ}C$. The culture filtrate was subjected to stepwise ammonium sulfate precipitation. The precipitated proteins from the 40% to 80% fraction showed antifungal activity and were further purified by column chromatography. The eluted proteins from fractions 9-10 and 33-34 had the highest antifungal activity at about 75% and 82% inhibition, respectively. SDS-PAGE revealed that the 9-10 fraction contained mixed proteins with molecular weights of 54 kDa, 32 kDa, and 20 kDa, while the 33-34 fraction contained mixed proteins with molecular weights of 40 kDa, 32 kDa, and 29 kDa. Each band of the proteins was analyzed by LC/MS to identify the protein. The result from Spectrum Modeler indicated that these proteins were closed similarly to three groups of the following proteins; catalase, chitin binding protein, and protease. Morphological study under scanning electron microscopy demonstrated that the partially purified proteins from P. aeruginosa RS1 caused abnormal growth and hypha elongation in P. palmivora. The bacteria and/or these proteins may be useful for controlling black rot disease caused by P. palmivora in orchid orchards.

폐타이어 열분해에 의한 카본블랙을 이용한 황화수소와 암모니아 제거를 위한 흡착제 개발 (Development of Adsorbents for Removal of Hydrogen Sulfide and Ammonia Using Carbon Black from Pyrolysis of Waste Tires)

  • 서양곤;김창준;김대혁
    • 청정기술
    • /
    • 제21권2호
    • /
    • pp.108-116
    • /
    • 2015
  • 황화수소와 암모니아는 많은 하수처리장과 산업 플랜트로부터의 배출가스에서 발견되어질 수 있는 가장 흔한 악취성분이다. 이들 유해물질들은 인간에게 건강 문제를 일으키고 촉매에 악영향을 미치기 때문에 생활환경과 산업 현장에서의 제거는 매우 중요하다. 본 연구에서는 황화수소와 암모니아에 대한 우수한 흡착능력을 가지는 흡착제를 개발하기 위하여 폐타이어의 열분해 생성물인 카본블랙을 이용하였다. 카본블랙, 금속산화물과 산 또는 염기를 혼합하여 펠렛형 흡착제를 제조하였고, 상온상압에서 고정층 흡착탑의 파과곡선을 이용하여 황화수소와 암모니아에 대한 흡착성능을 평가하였다. 카본블랙, 산화철(III)과 수산화나트륨 혼합물로 제조된 흡착제가 황화수소에 대한 가장 우수한 작업능력을 나타내었다. 암모니아에 대해서는 카본블랙, 산화구리(II), 염산의 혼합물로 제조된 흡착제가 우수한 작업능력을 보였다.

연부(軟腐)고구마의 생화학적(生化學的) 연구(硏究) (Biochemical Study on Soft-rotted Sweetpotatoes)

  • 전재근
    • Applied Biological Chemistry
    • /
    • 제10권
    • /
    • pp.47-61
    • /
    • 1968
  • Rhizopus nigricans에 감염(感染)된 고구마의 생화학적(生化學的) 성질(性質)을 구명(究明)하기 위하여 연부(軟腐)고구마로부터 이상대사산물(異常代謝産物)을 분리(分離)하고 그 성질(性質)에 관(關)하여 실험(實驗)한 결과(結果)를 다음과 같이 요약(要約)한다. 1. 건전(健全)한 고구마에는 없는 이상대사산물(異常代謝産物)로서 19개(個)의 Ehrlich's 시약(試藥)에 대(對)한 양성반응성질(陽性反應性質)과 3개(個)의 형광성물질(螢光性物質)의 존재(存在)를 박층(薄層)크로마토그라프로 확인(確認)하였다. 2. 이상대사산물중(異常代謝産物中)에는 그 생성량(生成量)이 가장 많은 물질(物質)로서 Ipomeamarone과 Umbelliferone을 분리(分離)하고 이들의 정제(精製)와 동정(同定)을 행(行)하였다. 3. Ipomeamarone과 Umbelliferone의 경시적(經時的) 생성량(生成量)을 관찰(觀察)하고 이들의 가능(可能)한 생합성(生合成) 경로(經路)에 관(關)하여 고찰(考察)하였다. 4. 연부(軟腐)고구마의 이상대사산물중(異常代謝産物中) Ipomeamarone과 이의 유사물질(類似物質)은 ${\alpha}-amylase$에 대(對)한 활성(活性)을 저해(抵害)하였으며 그 저해형(抵害型)은 비경쟁적(非競爭的)이었다. 5. 연부(軟腐)고구마로부터 분리한 Ipomeamarone은 Yeast의 호흡(呼吸)을 촉진(促進)시켰으며 산화적(酸化的) 인산화반응(燐酸化反應)의 연합해제제(聯合解除劑)인 2, 4-dinitrophenol과 동일(同一)한 효과(效果)를 나타내었다.

  • PDF

Cinnamic acid, Cinnamaldehyde의 부위별 정량을 통한 계지(桂枝)의 음편(飮片) 규격 연구 (A Study of Cutting Methods by Comparing the Contents of Cinnamic acid and Cinnamaldehyde in Different Parts of Cinnamomi Ramulus)

  • 김영식;이금산;김정훈;최고야;정승일;조수인;주영승;김홍준
    • 대한본초학회지
    • /
    • 제26권2호
    • /
    • pp.11-15
    • /
    • 2011
  • Objectives : In the present study, the contents of cinnamic acid and cinnamaldehyde in three different parts of Cinnamomi Ramulus (CR) (the whole body, the bark part, and the wood part) was evaluated using UPLC (ultra performance liquid chromatography) in order to investigate a suitable cutting method. Methods : Analysis was performed on SMART LC with UV detector. Reference compounds were separated on Inertsil ODS-4 column ($2.1mm{\times}50mm$, $3{\mu}m$, GL Science, Japan) using isolation elution with water and acetonitrile each containing acetic acid at a flow rate of $500{\mu}L/min$. Additionally, samples of CR were purchased from pharmacy of medicinal herb. Results : The correlation coefficients of the cinnamic acid and cinnamaldehyde levels showed good linearity ($r^2{\geq}0.9999$) over the linear ranges. Furthermore, the bark part exhibited higher concentration levels of reference compounds than the wood part in all samples. In addition the bark exfoliation rates in oblique and perpendicular-long cut samples of CR were lower than the perpendicular-short cut samples. Conclusions : These results suggested that the optimal cutting method would be able to reduce the bark exfoliation. Therefore, the oblique or perpendicular-long cutting method is considered to be a better cutting type than the perpendicular-short cutting method.

해양세균 Pseudomonas sp. CHCS-2에 의한 원유분해 및 생물유화제의 성분 분석 (Biodegradation of Crude oil by Marine Bacterium Pseudomonas sp. CHCS-2 and Composition of the Biosurfactant)

  • 김학주;김봉조;하순득;황선희;공재열
    • KSBB Journal
    • /
    • 제14권2호
    • /
    • pp.192-197
    • /
    • 1999
  • 해양세균 Pseudomonas sp. CHCS-2는 배양과정 중에 포도당 첨가에 의해 생물유화제의생산이 증가되었으며, 196시간 배양시 원유에 포함되어 있는 paraffine계 탄화수소 중에서 $_nC_{12}~_nC_{22}$까지 범위의 carbonchain이 거의 대부분 분해됨을 알 수 있었다. chloroform : metahnol = 1 : 1(V/V)로 추출하여 얻은 8.5g/L의 crude 생물 유화제를, Amberlite XAD-7, Sepharose CL-4B, DEAE-sepharose CL-6B 수지를 사용하여 정제한 결과 최종적으로 0.21g/L의 정제된 생물유화제를 얻었다. 본 균주가 생산하는 생물유화제는 단백질과 octadecanoic acid가 결합된 분자량이 약 67kDa인 lipoprotein으로 확인되었으며, 정재된 생물유화제중 단백질성분만을 분리하여 N-말단 아미노산배열을 분석한 결과, Ser-Val-He-Asn-Thr-Asn-IIe-Thr-X-Met-Ile-Gly-Gin-Gln-의 배열을 가지는 것으로 확인되었다. 이는 기존에 보고된 lipoproten과 다른 형태의 것으로, 본 균주가 생산하는 생물유화제의 경우 구성성분, 분자량 등을 고려해 볼 때 새로운 형태의 lipoprotein 계열 생물유화제로 추정된다.

  • PDF

대형트럭 승객거동과 상해치 해석을 위한 유한요소모델의 개발 (Development of a finite Element Model for Studying the Occupant Behavior and Injury Coefficients of a Large-sized Truck)

  • 오재윤;김학덕;송주현
    • 대한기계학회논문집A
    • /
    • 제26권8호
    • /
    • pp.1577-1584
    • /
    • 2002
  • This paper develops a finite element model for studying the occupant behavior and injury cofficients of a large-sized cab-over type truck. Since it does not have a room to absorb collision energy and deformation in front of the passenger compartment the deformation is directly transmitted to the passenger compartment. Moreover, since its steering column is attached on the frame, severe deformation of the frame directly affects on the steering wheel's movement. Therefore, if the occupant behavior and injury coefficients analysis is performed using a finite element model developed based on a sled test, it is very difficult to expect acquiring satisfactory results. Thus, the finite element model developing in this paper is based on the frontal crash test in order to overcome the inherent problems of the sled test based model commonly used in the passenger car. The occupant behavior and injury coefficients analysis is performed using PAM-CRASH installed in super-computer SP2. In order to validate the reliability of the developed finite element model, a frontal crash test is carried out according to a test method used fur developing truck occupant's secondary safety system in european community and japan. That is, test vehicle's collision direction is vertical to the rigid barrier and collision velocity is 45kph. Thus, measured vehicle pulses at the lower parts of the left and right B-pilla., dummy chest and head deceleration profiles, HIC(head injury criterial) and CA(chest acceleration) values, and dummy behavior from the frontal crash test are compared to the analysis results to validate reliability of the developed model.

스파르가눔 총체에서 분리한 cysteine proteinase의 정제 및 부분 특성 (Isolation and Partial Characterization of Cysteine Proteinase from Sparganum)

  • 송철용;최동호
    • Parasites, Hosts and Diseases
    • /
    • 제30권3호
    • /
    • pp.191-200
    • /
    • 1992
  • 한국산 유혈목이에서 스파르가눔 충체를 수집하고, 이들 충체의 추출액에서 ion-exchange chromatography와 affinity chromatography를 실시하여 cysteine proteinase를 순수 정제하였다. 경제된 효소의 최적 pH는 5.5이었고, 최적 mole 농도는 0.IM (0.1M sodium acetate, pH5.5) 이었다. 정제된 대소는 thiol-dependent이고, $4^{\circ}C$에서 pH 5.0일 때 24시간 동안 안전성을 보였다. 효소의 환성도는 저분자 합성기질인 CBZ-phe-arg-AFC에 대 해 활성이 높았다. 정제된 효소는 척추동물의 산성 cysteine proteinase의 억제인자에 감수성을 보였다. UItrogel AcA54 column chromatography로 정제된 cysteine proteinase의 분자량을 측정한 결과 28,000 dalton이었다. 정제된 효소는 collagen type I과 hemoglobin을 분해하였다. Immunoblot한 결과 정제된 효소는 스파르가눔증 환자의 혈청과 반응하였다. 이상의 결과에서 스파르가눔의 cysteine proteinase는숙주 체내이동, 조직침수성 및 영양소 섭취에 관여할 것이라 추정되며, 정제된 효소는 스파르가눔 현중의 혈청학적 진단에 이용될 수 있을 것으로 생각된다.

  • PDF

상·하부 ㄱ형강 반강접 CFT 기둥-보 접합부의 단조 및 이력거동 (Monotonic and Hysteresis Behavior of Semirigid CFT Column-to-Beam Connections with a Top-Seat Angle)

  • 이성주;김주우
    • 한국강구조학회 논문집
    • /
    • 제26권3호
    • /
    • pp.191-204
    • /
    • 2014
  • 본 논문에서는 반복하중을 받는 CFT 합성골조에서 부분강접 접합부인 상 하부 ㄱ형강 접합부의 휨모멘트 내력을 구하기 위하여 체계적인 수치해석이 수행되었다. 고강도강 연결봉으로 조립된 합성 부분강접 CFT 접합부의 회전강성, 휨모멘트 내력 및 파괴모드를 연구하기 위하여 3차원 비선형 유한요소 해석이 수행되었다. 부가적인 다양한 구조적 거동은 ㄱ형강의 두께 및 고강도 강봉 게이지 거리로 상 하부 ㄱ형강 접합의 파라미터에 대한 영향을 설명하고 있다. 해석모델의 적합성은 유한요소해석 결과로부터 얻은 모멘트-회전각 곡선을 Richard의 회귀분석을 통하여 비교 분석하였다.

토양에서 유기화합물질의 침투 거동 연구 (Analysis on the Seepage Behavior of Organic Contaminants in Soil)

  • 이준호;한선향;박갑성
    • 한국물환경학회지
    • /
    • 제29권4호
    • /
    • pp.489-496
    • /
    • 2013
  • 지하수계의 근간을 이루는 토양시스템은 유기화학물질에 오염되기 쉬운 환경에 놓인다. 이러한 토양의 유기화학물질 침투 거동을 평가하기 위해 점토, 실트 및 모래로 구성된 실험장치에 유기화학 물질 이동실험을 하였다. Chloroform, 1,1,1-trichloroethane 및 trichloroethylene은 토양을 통해 이동이 쉽게 이루어지며, 투과된 오염물질의 질량은 전체 질량의 최소 4.6에서 최대 19.2% 범위를 보였다. Tetrachloroethylene Tetrachloroethylene, 1,2-dichlorobenzene 및 1,3-dichlorobenzene은 토양 흡착에 의해 이동이 지연되어졌으며, 각 매개체의 0.6 ~ 4.8%가 표층에서 여과되는데 이용되었다. Carbon tetrachloride는 거의 투과되지 못하였고, 단지 0.1 ~ 0.4% 질량만이 침투거동에 도달하였다. Bromoform은 거의 투과되지 못하였으며, 브롬화(Br) 화합물의 중간 전환물질로도 확인되었다. 유기화학오염물들의 이동은 토양입자크기 및 수리전도도 등에 따라 달라진다고 여겨지나 본 연구에서는 유기화학오염물들의 이동은 점토, 실트 토양보다 모래 토양에서 더욱 빠르게 나타났다.