Journal of Korean Society of Steel Construction (한국강구조학회 논문집)

Korean Society of Steel Construction (한국강구조학회)
권호 표지
DOI QR코드

DOI QR Code

Monotonic and Hysteresis Behavior of Semirigid CFT Column-to-Beam Connections with a Top-Seat Angle

상·하부 ㄱ형강 반강접 CFT 기둥-보 접합부의 단조 및 이력거동

  • Received : 2014.03.07
  • Accepted : 2014.05.22
  • Published : 2014.06.27
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper a systematic numerical analysis is performed to obtain the bending moment resisting capacity of a top and seat angle connection, which is a type of partially restrained connection, for a CFT composite frame subjected to cyclic loading. This partially restrained composite CFT connections are fabricated using high strength steel connection bar. The three-dimensional nonlinear finite element models are constructed to investigate the rotational stiffness, bending moment capacity, and failure modes. A wide scope of additional structural behaviors explain the different influences of the top and seat angle connection's parameters, such as the different thickness of connection angles and the gage distances of the high strength steel bar. The moment-rotation angle relationships obtained from the finite element analysis are compared with those from Richard's theoretical equation.

본 논문에서는 반복하중을 받는 CFT 합성골조에서 부분강접 접합부인 상 하부 ㄱ형강 접합부의 휨모멘트 내력을 구하기 위하여 체계적인 수치해석이 수행되었다. 고강도강 연결봉으로 조립된 합성 부분강접 CFT 접합부의 회전강성, 휨모멘트 내력 및 파괴모드를 연구하기 위하여 3차원 비선형 유한요소 해석이 수행되었다. 부가적인 다양한 구조적 거동은 ㄱ형강의 두께 및 고강도 강봉 게이지 거리로 상 하부 ㄱ형강 접합의 파라미터에 대한 영향을 설명하고 있다. 해석모델의 적합성은 유한요소해석 결과로부터 얻은 모멘트-회전각 곡선을 Richard의 회귀분석을 통하여 비교 분석하였다.

Keywords

References

  1. 송종욱, 박영욱, 김진호, 최성모(2004) 합성 반강접 CFT 기둥-보 접합부(PRCCs)의 구조성능에 관한 실험적 연구, 2004년도 추계학술발표대회논문집, 대한건축학회, 제24권, 제2호, pp.27-30. Song, J.W., Park, Y.W., Kim, J.H., and Choi, S.M. (2004) An Experimental Study on the Structural Capacities for Partially Restrained Composite CFT Column-to-Beam Connection, Proceedings of the 2004 AIK's Autumn Conference, Structure & Construction, Vol.24, No.2, pp.27-30 (in Korean).
  2. Hechtman, R.A. and Johnston, B.G. (1947) Riveted Semi-Rigid Beam-to-Column Building Connections, Progress Report No. 1, AISC Research at Lehigh University, Bathlehem, PA.
  3. Altman, W.G., Azizinamini, A., and Bradburn, J.H. (1982) Moment-Rotation Characteristics of Semi-Rigid Steel Beam-to-Column Connections, Dept. of Civil Eng., Univ. of South Carolina, Columbia, SC.
  4. Azizinamini, A., Bradburn, J.H., and Radziminski, J.B. (1985) Static and Cyclic Behavior of Semi-Rigid Steel Beam-Column Connections, Structural Res. Studies, Dept. of Civil Eng., Univ. of South Carolina, Columbia, SC.
  5. Roeder, C.W. and Dailey, R.H. (1989) The Results of Experients on Seat Beam Connections, Eng, J., AISC, Vol.26, No.3, pp.90-95.
  6. Ahmed, A, Kishi., Komuro, M., and Matsoka, K. (2001) Nonlinear Analysis on Prying of Top-and Seat-Angle Connections, Journal of Applied Mechanics, Vol.4, pp.227-236. https://doi.org/10.2208/journalam.4.227
  7. Komuro, M., Kishi, N., and Chen, W.F. (2004) Elastic-Plastic FE Analysis on Moment-Rotation Relations of Top-and Seat-Angle Connections, Connections in steel structures V.
  8. Pirmoz, A., Mohammadrezapour, E., Seyed Khoei, A., and Saedi, D.A. (2009) Moment - Rotation Behavior of Bolted Top and Seat Angle Connections, Journal of Constructional Steel Research, Vol.65, pp.973-984. https://doi.org/10.1016/j.jcsr.2008.08.011
  9. Reinosa, J.M., Loureiro, A., Gutierrez, R., and Moreno, A.(2008) Nonlinear Elastic-Plastic 3D Finite Element Modeling - Top and Seat Angle Connection with Double web Angle, EUROSTEEL 2009, pp.501-506.
  10. Yang, J.G. and Jeon, S.S.(2009) Analytical Models for the Initial Stiffness and Plastic Moment Capacity of an Unstiffened Top and Seat Angle Connection under a Shear Load, International Journal of Steel Structures, Vol.9, No.3, pp.195-205. https://doi.org/10.1007/BF03249494
  11. 양재근, 최정환, 김현광, 박재호(2011) 무보강 상․하부 ㄱ형강 접합부의 소성휨모멘트 저항능력 예측을 위한 실험 및 해석적 연구, 한국강구조학회논문집, 한국강구조학회, 제23권, 제5호, pp.547-555. Yang, J.G., Choi, J.H., Kim, H.K., and Park, J.H. (2011) Experimental Tests and Analytical Study for the Prediction of the Plastic Moment Capacity of an Unstiffened Top and Seat Angle Connection, Journal of the Korean Society of Steel Construction, Vol.23, No.5, pp.547-555 (in Korean).
  12. 양재근, 김윤, 박재호(2012) 상.하부 스플릿 T 접합부의 초기회전강성 예측모델, 한국강구조학회논문집, 한국강구조학회, 제24권, 제3호, pp.279-287. Yang, J.G., Kim, J., and Park, J.H. (2012) Prediction Model for the Initial Rotational Stiffness of a Double Split T Connection, Journal of the Korean Society of Steel Construction, Vol.24, No.3, pp.279-287 (in Korean). https://doi.org/10.7781/kjoss.2012.24.3.279
  13. 양재근, 김주우, 김윤(2012) 상.하부 스플릿 T 접합부의 휨강도 설계식, 한국강구조학회논문집, 한국강구조학회, 제24권, 제5호, pp.511-520. Yang, J.G., Kim, J.W., and Kim, Y. (2012) Design Formula for the Flexural Strength of a Double Split Tee Connection, Journal of the Korean Society of Steel Construction, Vol.24, No.5, pp.511-520 (in Korean). https://doi.org/10.7781/kjoss.2012.24.5.511
  14. 이성주, 김주우(2013) 더블 웨브앵글 반강접 CFT 기둥-보 접합부의 이력거동, 한국강구조학회논문집, 한국강구조학회, 제25권, 제1호, pp.15-24. Lee, S.J. and Kim, J.W. (2013) Hysteresis Behavior of Semirigid CFT Column-to-Beam Connections with a Double Web-Angle, Journal of the Korean Society of Steel Construction, Vol.25, No.1, pp.15-24 (in Korean). https://doi.org/10.7781/kjoss.2013.25.1.015
  15. Chen, W.F. (1987) Joint Flexibility in Steel Frames, Elsevier Applied Science.
  16. Chen, W.F. and Kishi, N. (1989) Moment - Ratation Relation of Top and Seat Angle Connections, Proceedings of the Int. Colloquium on Bolted and Special Connections, Moscow, USSR, pp.15-20.
  17. Chen. W.F. and Lui, E.M. (1991) Stability Desgin of steel Frames, CRC Press.
  18. Faella, C., Piluso, V., and Rizzano, G. (1996) Predication of the Flexural Resistance of Bolted Connections with Angles, IABSE Colloquium on Semi-Rigid Structural Connections, pp.25-27.
  19. Faella, C., Piluso, V., and Rizzano, G. (1998) Experimental Analysis of Bolted Connections: Snug vs. Preloaded Bolts, Journal of Environmental Engineering, ASCE, Vol.124, No.7, pp.765-774.
  20. Faella, C., Piluso, V., and Rizzano, G. (2000) Structural Steel Semi-Rigid Connections: Theory, Design and Software, CRC Press.
  21. ANSYS (2011) ANSYS Multiphysics, Version 13.0, ANSYS Inc. Canonsburg, PA, USA.
  22. AISC(2006) Manual of Steel Construction, American Institute of steel Construction, 13th Edition, American Institute of steel Construction, Chicago.
  23. Richard, R.M., and Abbott, B.J. (1975) Versatile Elastic-Plastic Stress-Strain Formula, Journal of Engineering Mechanics Division, ASCE, Vol.101(EM4), pp.511-515.
  24. Richard, R.M., Hsia, W.K., and Chmielowiec, M. (1988) Derived Moment-Rotation Curvesfor Double-Framing Angles, Computers and Structures, Vol.3, pp.485-494.
  25. Jaspart, J.P. (1991) Etude de la Semi-rigidite des Noeuds Poutre-Colonne et son Influence sur la Resistance et la Stabillite des Ossatures en Acier, Ph.D. thesis, University of Liege, Belgium (in French).
  26. Jaspart, J.P. and Maquoi, R. (1991) Plastic Capacity of End-Plate and Flange Deated Connections; Prediction and desgin rules, Proc. Second International Workshop on Connections in steel Structures, Pittsburgh. USA.
  27. Jaspart, J.P., Steenhuis, M., and Weinand, K. (1995) The Stiffness Model of Revised Annex J of Eurocode 3, Proceedings of Third International Workshop on Connection in Steel Structures, Trento, Italy.
  28. Kishi, N. and Chen, W.F. (1990) Moment - Rotation Relations of Semi-Rigid Connections with Angles, Journal of Environmental Engineering, ASCE, Vol.116, pp. 1813-1834.
  29. Lorenz, R.F., Kato, B., and Chen, W.F. (1992) Semi-Rigid Connections on Steel Frames, CTBUH, McGraw-Hill.
  30. Thornton, W.A. (1985) Prying Action; A General Treatment, Journal of Environmental Engineering, AISC, Vol.22, pp.67-75.
  31. Thornton, W.A. (1992) Strength and Serviceability of Hanger Connections, Journal of Environmental Engineering, AISC, Vol.29, pp.145-149.
  32. Thornton, W.A. (1996) A Rational Approach to the Design of Tee Shear Connections, Journal of Environmental Engineering, AISC, Vol.33, pp.34-37.
  33. Thornton, W.A. (1997) Strength and Ductility Requirements for Simple Shear Connections with Shear and Axial Load, Proceedings of the National Steel Construction Conference, AISC, Vol.38, pp.1-17.