• Textile Coloration and Finishing
• /
• v.34 no.3
• /
• pp.135-145
• /
• 2022

In this study, the dyeability of 0.06-denier-per-filament (dpf) ultrafine sea-island-type nylon knitted fabric was investigated and compared with that of 1.0-dpf general nylon with respect to four types of dyes. In particular, leveling, milling, half-milling, and metal-complex dyes were compared at concentrations of 0.5%, 1.0%, 2.0%, 4.0%, and 8.0% on-weight-fabric (o.w.f). In each case, staining was performed at 100 ℃. The dyeabilities of the materials were compared in terms of the depth of color as defined by the ratio of the absorption coefficient (K) to the scattering coefficient (S). Results indicated generally low K/S values for both the 0.06-dpf ultrafine sea-island-type nylon and 1.0-dpf general nylon. In terms of the dye type, the milling and half-milling dyes exhibited K/S values of ≥20 for all colors of yellow, red, and blue for the 0.06-dpf ultrafine yarn sea-island-type nylon, which were superior to those of the other dye types. Hence, the milling and half-milling dyes are considered more suitable than the other dyes. Further, a comparison of dye fastness and compatibility revealed that the half-milling dye was the most suitable dye for the 0.06-dpf ultrafine sea-island-type nylon.

• Textile Coloration and Finishing
• /
• v.21 no.1
• /
• pp.10-20
• /
• 2009

The objective of this study is to investigate the efficacy of leaf powder colorants as substitutes for traditional fresh juice extract dyeing. Three kinds of leaf powder colorants were prepared by freeze drying method with or without deep freezing as pre-treatment: one powder colorant from fresh leaf juice with deep freezing; two kinds of powder colorant from fresh leaves with and without deep freezing. Their dyeing properties and storage stabilities were studied and compared with the traditional fresh juice extract dyeing. The presence of indigo in the powder colorants was confirmed by UV/Visible absorption spectra. They showed absorption peak at 602nm which was same with indigo absorption peak. Dyeing was done at low temperature around 6$^{\circ}C$. All three powder colorants produced B colors on silk fabrics, showing similar color to the one dyed traditionally with fresh juice extract. The powder colorants from leaves gave higher color strength than the powder from leaf juice. The powder colorant prepared from leaves with deep freezing was the most stable for long term storage as its color and color strength were not changed after 360 days. So, this was used for further dyeing to study the effects of concentration and repeat dyeing on color strength and colorfastness. Fastnesses to dry cleaning and rubbing were fairly good above 4 rating. Further study is needed to improve light fastness. It was concluded that the leaf powder colorant with deep freezing could be used as a substitute for traditional juice extract dyeing at all seasons.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.31 no.1
• /
• pp.65-78
• /
• 2013

In gravure printing ink in printed flexible packaging considering the characteristics of the study more accurate color management options and results were as follows. When applying G7 calibration, P2P of the target GRACol G7 evaluate the delta $L^*$ and delta $F^*$, CMY and K-scale average of the results of delta $L^*$ and the highest tolerance G7 average of 1.5 and 3.0 are included in all the best. In addition, the average delta $F^*$ and super delta $F^*$, G7 tolerance by being included within the scope of color management, G7 calibration was possible. Target IT 8.7/4 CMYK, when applied to the calibration G7, Color gravure printing machine is applied to the average of the previous decreased from 12.4 to 3.6. In addition, if a digital proof is EPSON WT 7900 the average color applied to the previous reduction from 5.24 to 0.74 because of the gravure printing color proofing system was effective in the management. G7 calibration by applying the reference print profile of the Epson WT 7900-G-icc, the average was 0.74 coloration, and gravure-G-icc cases, the average color of the 3.60 per GRACol average of all the five colors below were included within the allowable range. Thus, the flexible packaging gravure printing color management of printed after applying the first G7 calibration, the results refer to the press by the profiling, and where best to take advantage of the profile creation was good.

• Journal of the Korean Ceramic Society
• /
• v.46 no.4
• /
• pp.405-412
• /
• 2009

In high temperature ceramic glazes, a stable range of pink-red colors that produced $Cr_2O_3-SnO_2-CaO-SiO_2$ pigments were factored by Cassiterite($SnO_2$) and Malayaite($CaSnSiO_5$) by $Cr_2O_3$. The experiment examined the influence of $CrCl_3$, a Sn-Cr substitution added with a mineralizer ($H_3BO_3$), as a chromophore in pigments. The experiment also studied the effect of $H_3BO_3$ (2 wt%) when added to malayaite($CaSnSiO_5$) to see if the crystalline reaction will increase. $Cr_2O_3$ was also substituted with $CrCl_3$ in order to prove how much influence $CrCl_3$ had on the $H_3BO_3$. Malayaite and cassiterite were the basic compound materials and the experiment was conducted both with and without mineralizers (2 wt% of $H_3BO_3$). Each compound was synthesized at 800, 1000, 1200, 1300, 1400, $1500^{\circ}C$ for 2 h. Synthesized pigments were analyzed by XRD, FT-IR and UV-Vis. The temperature variation produced two crystal phases that showed the different engaging effects of Cr oxidation. $CrCl_3$ produced a better effect on the malayaite crystal phase, resulting in a more defined pigmentation of the pink-red coloration compared to $Cr_2O_3$.

• Journal of Plant Biotechnology
• /
• v.42 no.4
• /
• pp.342-349
• /
• 2015

Kiwifruit is a new fruit crop that was commercialized in the late 1970s. Recently, its cultivation and consumption have increased rapidly worldwide. Kiwifruit is a dioecious, deciduous, and climbing plant having fruit with hairs and various flesh colors and a variation in ploidy level; however, the industry consists of very simple cultivars or genotypes. The need for efficient cultivar improvement together with the evolutional and biological perspectives based on unique plant characteristics, have recently encouraged genome analysis and bioinformatics application. The draft genome sequence and chloroplast genome sequence of kiwifruit were released in 2013 and 2015, respectively; and gene annotation has been in progress. Recently, transcriptome analysis has shifted from previous ESTs analysis to the RNA-seq platform for intensive exploration of controlled genetic expression and gene discovery involved in fruit ascorbic acid biosynthesis, flesh coloration, maturation, and vine bacterial canker tolerance. For improving conventional breeding efficiency, molecular marker development and genetic linkage map construction have advanced from basic approaches using RFLP, RAPD, and AFLP to the development of NGS-based SSR and SNP markers linked to agronomically important traits and the construction of highly saturated linkage maps. However, genome and transcriptome studies have been limited in Korea. In the near future, kiwifruit genome and transcriptome studies are expected to translate to the practical application of molecular breeding.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.801-806
• /
• 2022

In the modern era, the necessity of color capability in the digital era is the demand of the era, and research on improving color practice on the subdivided digital four areas that are not in the existing practice is needed. For digital majors who are difficult to solve in existing paint color practice, classes in digital color practice in four more specialized areas are needed, and the use of efficient artificial intelligence was studied for classes in digitized color and color sense. In this paper, we tried to show the expansion of the color practice area by suggesting digital color practice and color matching method based on Photoshop artificial intelligence and big data technology that existing color and color matching were practice that only CMYK could do. In addition, based on the color quantification data of individual users provided by the latest Adobe Sceney program artificial intelligence, the purpose of the practice was to improve learners' predictions of actual color combinations and random colors using filter effects. In conclusion, it is a study on the use of programs that eliminate ambiguity in the mixing process of existing paint practice, secure digital color details, and propose a practical method that can provide effective learning methods for beginners and intermediates to develop their senses through artificial intelligence support. The Adobe program practice method necessary for coloration and main color through theoretical consideration and improvement of teaching skills that are better than existing paint practice were presented.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.28 no.3
• /
• pp.123-129
• /
• 2018

Ink-jet printing technology with ceramic ink of the four digital primary colors (cyan, magenta, yellow, and black; CMYK) can provide stable coloration even in the high-temperature firing process. Ceramic ink-jet printing can be widely applied in construction and ceramic industries due to the advantages of accurate and fast printing process of digital images for various products. Generally, organic solvent with proper viscosity and surface tension has been used in digital ink-jet printing process. However, the needs of ceramic ink without VOCs emission is increasing. In the present study, eco-friendly ceramic ink was synthesized by combining alumino boro-silicate glass frit and $CoAl_2O_4$ inorganic pigment based on an aqueous solvent that does not generate VOCs. The rheological properties and dispersion stability of aqueous ceramic ink were optimized. Jetting behavior and printing characteristics of the ceramic ink were also investigated in detail. As a result, the formulated aqueous ceramic complex ink showed a suitable jetting behavior without satellite drop by adjusting viscosity and surface tension. The ceramic ink can be printed on glass substrate with minimized spreading phenomena duo to high contact angle.