• Korean journal of applied entomology
• /
• v.51 no.3
• /
• pp.207-213
• /
• 2012

The cryptic mealybug, Pseudococcus cryptus, has been increasingly damaging citrus, particularly those plants grown in plastic greenhouses. This study was conducted to monitor the seasonal phenology of adult male cryptic mealybugs and to determine the timing for control using a sex pheromone trap. Adult males responded to a synthetic sex pheromone and trap color. An increasing number of males were attracted to the traps with increasing concentrations of sex pheromone up to 5 mg. The males occurred annually four times and had three cohorts at a time due to different overwintering developmental stages. After overwintering the adult males began to in mid-late April. A positive correlation was observed between the number of adult males caught in traps and the mean density per twig of all motile stages except first stage nymphs of the cryptic mealybugs. The peak time for the first nymph to occur was estimated from the maximum attraction time of the males, and the cumulative degree days (DD) was 350 DD, similar with the preoviposition period.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.5
• /
• pp.60-69
• /
• 2008

The principal reasons for applying a pigment coating to paper are to improve appearance and printability. The pigment coating provides a surface that is more uniform and more receptive to printing ink than are the uncoated fibers and, in turn, both facilitates the printing process and enhances the graphic reproduction. The improvement in print quality is readily apparent, especially in image areas or when multiple colors are involved. Although pigment coating of paper is to improve the printability, coated paper is not completely free from printing defects. Actually there are a number printing defects that are observed only with the coated papers. Among the printing defects that are commonly observed for coated papers, print mottle during multi-color offset printing is one of the most concerned defects, and it appears not only on solid tone area but also half dot print area. There are four main causes of print mottle ranging from printing inks, dampening solution, paper, and printing press or its operation. These indicates that almost every factors associated with lithographic printing can cause print mottle. Among these variation of paper quality influences most significantly on print mottle problems in multicolor offset printing, and this indicates that paper is most often to be blamed for its product deficiency as far as print mottle problems are concerned. Furthermore, most of the print mottle problems associated with paper is observed when coated papers are printed. Uncoated papers rarely show mottling problems. This indicates that print mottle is the most serious quality problems of coated paper products. Overcoming the print mottle is becoming more difficult because the operating speeds of coating and printing machines are increasing, coating weights are decreasing, and the demands on high-quality printing are increasing. Print mottle in offset printing is caused by (a) nonuniform back trap of ink caused by a nonuniform rate of ink drying, referred as "back trap mottle, and (b) nonuniform absorption of the dampening solution. Furthermore, both forms of print mottle have some relationship to the structure of the coated layer. The surest way of eliminating ink mottling is to eliminate unevenness in the base paper. Coating solutions, often easier to put into practice, should, however, be considered. In this paper the principal factors influencing print mottle of coated papers will be discussed. Especially the importance of base paper roughness, binder migration, even consolidation of coating layers, control of the drying rate, types of binders, etc. will be described.

• The Korean Journal of Soil Zoology
• /
• v.7 no.1_2
• /
• pp.1-5
• /
• 2002

The pumpkin fruit fly [Bactrocera (paradacus) depressa Shiraki] was first trapped on June 1st with ground and Mcphail traps in Jinan and Iksan drea, Chonbuk Province and was found to have single generation during the grow-ing season in 2002. Not much difference existed in the number of B. (paradacus) depressa flies attracted to various colors but Bactrocera (zugodacus) scurellatus Hendal came to yellow and green more than to blue color. In a study of the effect of diets on the degree of attraction by the flies, it turned out that B. (paradacus) depressa came more to yeast hydrolysate (YH) and in June i.e, the early period of adult emergence of the year. However, more individuals of B. (zugodacus) scutellatus are attracted to the extract of young pumpkin fruits. More B. (paradacus) depressa was caught with McPhail traps while more B. (zugodacus) scurellatus was caught with sticky traps and accordingly, species specific traps are recommended when yearly population trends of fruit flies are studied.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.59.1-59.1
• /
• 2012

Organic thin-film transistors (OTFTs) with printable semiconductors are promising candidate devices for flexible active-matrix (AM) display applications. Yet, stable operation of actual display panels driven by OTFTs has seldom been reported up to date. Here, we demonstrate a flexible reflective type polymer dispersed liquid crystal (PDLC) display, in which inkjet-printed OTFT arrays are used as driving elements with excellent areal uniformity in terms of device performance. As the active semiconductor, a novel, ambient processable conjugated copolymer was synthesized. The stability of the devices with respect to electrical bias stress was improved by applying a channel-passivation layer, which suppresses the environmental effects and hence reduces the density of trap states at the channel/dielectric interface. The combination of high performance and high stability OTFT devices enabled the successful realization of stable operating flexible color-displays by inkjet-printing.

• Electronics and Telecommunications Trends
• /
• v.34 no.5
• /
• pp.99-112
• /
• 2019

A quantum light source is an essential element for quantum information technology, including quantum communication, quantum sensor, and quantum computer. Quantum light sources including photon number state, entangled state, and squeezed state can be divided into two types according to the generation mechanism, namely single emitter and non-linear based systems. The single emitter platform contains atom/ion trap, solid-state defect/color center, two-dimensional material, and semiconductor quantum dot, which can emit deterministic photons. The non-linear based platform contains spontaneous parametric down-conversion and spontaneous four-wave mixing, which can emit probabilistic photon pairs. For each platform, we give an overview of the recent research trends of the generation, manipulation, and integration of single photon and entangled photon sources. The characteristics of quantum light sources are investigated for each platform. In addition, we briefly introduce quantum sensing, quantum communication, and quantum computing applications based on quantum light sources. We discuss the challenges and prospects of quantum light sources for quantum information technology.

• Korean journal of applied entomology
• /
• v.45 no.1 s.142
• /
• pp.37-43
• /
• 2006

Catch of garden thrips, Frankliniella intonsa, on sticky traps was assessed by color and height in commercial plastic vinyl house strawberry crops grown on 40-cm-high trellises. Yellow, blue and white sticky cards were tested for color attractiveness, and upper (50 cm), lower (10 cm above the floor) and ground were for height. At each height, trapped thrips on yellow, blue and white were significantly different. Blue sticky cards were significantly greater than traps on yellow and white. The trapped thrips were also significantly greatest at 50 cm above the floor, less at lower and ground. However, there is no significantly different the population of garden thrips on the flower in each tested site.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.18 no.3
• /
• pp.109-114
• /
• 2008

Novel green long persistent phosphors of $CaZrO_3$ : $HO_{3+}$ have been synthesized at high temperature with weak reduction atmosphere by traditional solid state reaction method. The role of $H_3BO_3$ as flux and the suitable concentration of Ho as activator on the $CaZrO_3$ : $HO_{3+}$ long persistent phosphors has been investigated. Crystals of $HO_{3+}$ doped $CaZrO_3$ long persistent phosphores were characterized by fluorescence spectrophotometer and photoluminescence (PL). The main emission spectra of 546 nm peak was revealed through synthesizing at high temperature in $N_2$ gas atmosphere. The after glow emission spectra of $CaZrO_3$ : $HO_{3+}$ long persistent phosphores arise at 546 nm peak of narrow range. because that revealed pure green color. Green long persistent phosphors have been observed in the system for over 5 h after UV irradiation (254 nm). The main emission peak was ascribed to $HO_{3+}$ ions transition from $^5F_4$, $^5S_2{\to}^5I_3$, and the after glow may be ascribed to the trap centers in the $CaZrO_3$ host lattice.

• Korean journal of applied entomology
• /
• v.52 no.4
• /
• pp.437-448
• /
• 2013

Hemipteran bugs, which were previously considered as secondary pests, have currently become important pests of numerous crops. Among them, Riptortus pedestris (Fabricius) is a major species that occurs in Korea, Japan, China, and South Asian countries. Riptortus pedestris infests leguminous crops like soybean, vetches, and red clover; fruit trees like persimmon and yuju; and grains like barley, foxtail millet, broomcorn, and sorghum. Riptortus pedestris causes the greatest damage to soybean, as it is the most suitable host for the bug. Feeding damage during pod formation significantly reduces the yield of soybean. Currently, 17 insecticides, including diazinon and etofenprox, are registered for the control of hemipteran bugs in Korea, and growers apply insecticides two to three times on a regular basis. Aggregation pheromone traps are widely used as a monitoring tool and partial control measure. The aggregation pheromone of R. pedestris attracts conspecific adults and nymphs and is used for food exploitation rather than sexual attraction. In addition, the pheromone serves as a kairomone for egg parasitoids such as Gryon japonicum (Ashmead) and Ooencyrtus nezarae Ishii. As a new method of pest management, nonviable host eggs were included in the pheromone trap to catch R. pedestris and propagate parasitoids. As a part of cultural practices, resistant soybean varieties with specific color and size of pod and control of flowering time through the alteration of planting date can be used. For the effective management of R. pedestris in the near future, development of cultural practices that can support natural control factors and the use of multiple control tactics are needed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.75-75
• /
• 2009

반도체 및 전자기기 산업에 있어 비활성메모리 (NVM)는 중요한 부운을 차지한다. NVM은 디스플레이 분야에 많은 기여를 하고 있으며, 특히 AMOLED에 적용이 가능하여 온도에 따라 변하는 구동 전류, 휘도, color balance에 따른 문제를 해결하는데 큰 역할을 한다. 본 연구는 NNN 구조에서 터널 층을 $SiN_X$ 박막에서 $SiO_XN_Y$ 박막으로 대체하기위한 $SiO_XN_Y$ 박막을 이용한 NNO구조의 NVM에 관한 연구이다. 이로 인하여 보다 얇으면서 우수한 절연 특성을 가지는 박막을 사용함으로써 실리콘 층으로부터 전하의 터널링 효과를 높여 전하 저장 정도를 높이고, 메모리 retention 특성을 향상시키는 터널 박막을 성장 시킬 수 있다. 최적의 NNO 구조의 메모리 소자를 제작하기 위하여 MIS 상태로 다양한 조건의 실험을 진행하였다. 처음으로 블로킹 박막의 두께를 조절하는 실험을 진행하여 최적 두께의 블로킹 박막을 찾았으며, 다음으로 전하 저장 박막의 band gap을 조절하여 최적의 band gap을 갖는 $SiN_X$ 박막을 찾았다. 마지막으로 최적두께의 $SiO_XN_Y$박막을 찾는 실험을 진행하였다. MIS 상태에서의 최적의 NNO 구조를 이용하여 유리 기판 상에 NNO 구조의 NVM 소자를 제작하였다. 제작된 메모리 소자는 문턱전압이 -1.48 V로 낮은 구동전압을 보였으며, I-V의 slope 값 역시 약 0.3 V/decade로 낮은 값을 보인다. 전류 점멸비($I_{ON}/I_{OFF}$)는 약 $5\times10^6$로 무수하였다. $SiN_X$의 band gap을 다양하게 조절하여 band gap 차이에 의한 밴드 저장 방식을 사용하였다. 또한 $SiN_X$은 전하를 전하 포획(trap) 방식으로 저장하기 때문에 본 연구에서의 메모리 소자는 밴드 저장 방식과 전하 포획 방식을 동시에 사용하여 우수한 메모리 특성을 갖게 될 것으로 기대된다. 우수한 비휘발성 메모리 소자를 제작하기 위해 메모리 특성에 많은 영향을 주는 터널 박막과 전하 저장 층을 다양화하여 소자를 제작하였다. 터널 박막은 터널링이 일어나기 쉽도록 최대한 얇으며, 전하 저장 층으로부터 기판으로 전하가 쉽게 빠져나오지 못하도록 절연 특성이 우수한 박막을 사용하였다. 전하 저장 층은 band gap이 작으며 trap 공간이 많은 박막을 사용하였다.

• Korean journal of applied entomology
• /
• v.40 no.1
• /
• pp.77-82
• /
• 2001

Flying behavior during nighttime and control methods of fruit sucking pests were investigated in yuzu (Citrus junos) groves at Koheung area from August to November in 1999. Among the 3 kind of bulbs with different color (white, blue and yellow), white bulb attracted the most number of fruit sucking pests . The 93 percent of the moths was attracted from sunset to 24 o\`clock. Main flying time of hemipteriods in early, mid, and late October were from 22 to 04 o\`clock, sunset to 02 o\`clock and sunset to 24 o\`clock, respectively. Their flying time become earlier as the night temperature declines. For control of fruit sucking pests, attraction liquid traps, light traps (100 W) and illumination light bulb were set up in the yuzu groves (1,000 $\m^2$) from the 1 st October to the 3rd November. Attraction liquid was composed of a raw rice wine 2,000 ml+black sugar 100 g+vinegar 100 ml. When established at 3 sites per 1,000 $\m^2$ orchard, attraction liquid trap reduced the number of sucking spots on yuzu fruit to 64% and its attracting effect maintained for 3 weeks after setting-up. Three light traps per 1,000 m2 which turned on from sunset to 02 o\`clock reduced the number of sucking spots by 60% .