• ETRI Journal
• /
• 제39권1호
• /
• pp.30-40
• /
• 2017

In this study, we investigate topology control as a means of obtaining the best possible compromise between the conflicting requirements of reducing energy consumption and improving network connectivity. A topology design algorithm capable of producing network topologies that minimize energy consumption under a minimum-connectivity constraint is presented. To this end, we define a new topology metric, called connectivity efficiency, which is a function of both algebraic connectivity and the transmit power level. Based on this metric, links that require a high transmit power but only contribute to a small fraction of the network connectivity are chosen to be removed. A connectivity-efficiency-based topology control (CETC) algorithm then assigns a transmit power level to each node. The network topology derived by the proposed CETC heuristic algorithm is shown to attain a better tradeoff between energy consumption and network connectivity than existing algorithms. Simulation results demonstrate the efficiency of the CECT algorithm.

• Nuclear Engineering and Technology
• /
• 제52권2호
• /
• pp.328-336
• /
• 2020

Cesium is a major product of uranium fission, which is the most commonly existed radionuclide in radioactive wastes. Various technologies have been applied to separate radioactive cesium from radioactive wastes, such as chemical precipitation, solvent extraction, membrane separation and adsorption. Crown ethers and calixarenes derivatives can selectively coordinate with cesium ions by ion-dipole interaction or cation-π interaction, which are promising extractants for cesium ions due to their promising coordinating structure. This review systematically summarized and analyzed the recent advances in the crown ethers and calixarenes derivatives for cesium separation, especially focusing on the adsorbents based on extractants for cesium removal from aqueous solution, such as the grafting coordinating groups (e.g. crown ether and calixarenes) and coordinating polymers (e.g. MOFs) due to their unique coordination ability and selectivity for cesium ions. These adsorbents combined the advantages of extraction and adsorption methods and showed high adsorption capacity for cesium ions, which are promising for cesium separation The key restraints for cesium separation, as well as the newest progress of the adsorbents for cesium separation were also discussed. Finally, some concluding remarks and suggestions for future researches were proposed.

• Journal of Power Electronics
• /
• 제17권5호
• /
• pp.1211-1222
• /
• 2017

In order to decrease the parameter sensitivity of deadbeat direct torque control (DB-DTC), an improved deadbeat direct torque control method for surface mounted permanent-magnet synchronous motor (SPMSM) drives is proposed. First, the track errors of the stator flux and torque that are caused by model parameter mismatch are analyzed. Then a sliding mode observer is designed, which is able to predict the d-q axis currents of the next control period for one-step delay compensation, and to simultaneously estimate the model parameter disturbance. The estimated disturbance of this observer is used to estimate the stator resistance offline. Then the estimated resistance is required to update the designed sliding-mode observer, which can be used to estimate the inductance and permanent-magnetic flux linkage online. In addition, the flux and torque estimation of the next control period, which is unaffected by the model parameter disturbance, is achieved by using predictive d-q axis currents and estimated parameters. Hence, a low parameter sensitivity DB-DTC method is developed. Simulation and experimental results show the validity of the proposed direct control method.

• Nuclear Engineering and Technology
• /
• 제53권8호
• /
• pp.2591-2599
• /
• 2021

The effect of thermal aging at 475 ℃ and 750 ℃ of Z3CN20.09M cast duplex stainless steel (CDSS) on microstructure, mechanical and intergranular corrosion properties were investigated by transmission electron microscope (TEM), nano indenter, scanning electron microscope (SEM) and corrosion fatigue test system. The result indicated that the spinodal decomposition and G precipitated were occurred after aged at 475 ℃, as well as sigma precipitated at 750 ℃. The microstructure degeneration of ferrite was saturated after aged for 2000h and 200 h at 475 ℃ and 750 ℃ respectively. The mechanical properties, intergranular corrosion resistance and corrosion fatigue lives were continuing deteriorated with increasing the aging time at both temperatures. The difference of the degeneration mechanisms of Z3CN20.09M CDSS aged at 475 ℃ and 750 ℃ was analyzed.

• Membrane and Water Treatment
• /
• 제10권5호
• /
• pp.353-360
• /
• 2019

ZSM-5 membrane was prepared on tubular macroporous ${\alpha}$-alumina support using a different synthesis route. The effects of organic template agent and Si/Al ratio of the synthesis gel on morphology, structure, and separation performance of the ZSM-5 membrane used for dehydration of isopropanol were investigated. High water perm-selectivity ZSM-5 membrane with a thickness of about $3.0{\mu}m$ and a low Si/Al ratio of 10.1 was successfully prepared from organotemplate-free synthesis gel with a molar composition of $SiO_2$ : $0.050Al_2O_3$ : $0.21Na_2O$ : NaF : $51.6H_2O$ at $175^{\circ}C$ for 24 h. The ZSM-5 membrane exhibited high pervaporation performance with a flux of $3.92kg/(m^2{\cdot}h)$ and corresponding separation factor of higher than 10,000 for dehydration of 90 wt.% isopropanol/water mixture at $75^{\circ}C$.

• Nuclear Engineering and Technology
• /
• 제51권2호
• /
• pp.501-509
• /
• 2019

In this paper a body-centered cubic(BCC) crystal plasticity model based on microscopic dislocation mechanism is introduced and numerically implemented. The model is coupled with irradiation effect via tracking dislocation loop evolution on each slip system. On the basis of the model, uniaxial tensile tests of unirradiated and irradiated RPV steel(take Chinese A508-3 as an example) at different temperatures are simulated, and the simulation results agree well with the experimental results. Furthermore, crystal plasticity damage is introduced into the model. Then the damage behavior before and after irradiation is studied using the model. The results indicate that the model is an effective tool to study the effect of irradiation and temperature on the mechanical properties and damage behavior.

• Animal Bioscience
• /
• 제34권9호
• /
• pp.1532-1543
• /
• 2021

Objective: This study was aimed to establish a quantitative detection method for meat contamination based on specific polypeptides. Methods: Thermally stable peptides with good responses were screened by high resolution liquid chromatography tandem mass spectrometry. Standard curves of specific polypeptide were established by triple quadrupole mass spectrometry. Finally, the adulteration of commercial samples was detected according to the standard curve. Results: Fifteen thermally stable peptides with good responses were screened. The selected specific peptides can be detected stably in raw meat and deep processed meat with the detection limit up to 1% and have a good linear relationship with the corresponding muscle composition. Conclusion: This method can be effectively used for quantitative analysis of commercial samples.

• 한국의류산업학회지
• /
• 제24권1호
• /
• pp.53-65
• /
• 2022

The fashion industry is facing numerous sustainability-related challenges due to growing consciousness about the egregious extent of global environmental problems. This study examines research trends on sustainable fashion based on five macro trends related to sustainable innovation in the fashion industry. Using the content analysis and network analysis methods, 115 research papers published in domestic and international journals from 2017 to 2021 were collected and analyzed. The study conclusions are as follows. First, majority of domestic papers(55.41%) focused on circular economy, whereas other topics such as consumer awareness(1.35%) and corporate social responsibility(2.70%), are yet to be thoroughly examined; majority of international papers(53.65%) focused on sharing economy and collaborative consumption, whereas other topics such as technological innovation(2.44%), are yet to be thoroughly examined. Second, domestic papers have found that many brands(68.57%) are applying the concept of circular economy, whereas international papers have found that many brands(51.56%) are applying the concept of sharing economy and collaborative consumption. The study results provide useful data for corporate management in the fashion industry.

• 정보처리학회논문지C
• /
• 제11C권4호
• /
• pp.545-554
• /
• 2004

WebDAV(Web-based Distributed Authoring and Versioning, RFC 2518)는 인터넷을 통하여 원거리에 위치한 다수의 작업자들 간의 협업을 지원하기 위한 프로토콜이다. 웹데브(WebDAV)는 웹 통신 프로토콜인 HTTP/1.1의 확장으로 인터넷을 통하여 다양한 콘텐츠의 비동기적인 협업을 지원하기 위한 프로토콜을 제공한다. 웹 기반의 협업지원 시스템이나 문서관리 시스템과 같은 기존의 응용 시스템에서 웹데브 기능을 제공 하기 위해서는 이러한 시스템들이 웹데브의 메서드(method)와 헤더(header) 정보를 다루는 추가적인 구현이 필요하다. 본 논문에서는 웹데브 명세를 지원하는 아파치 기반의 DAVinci(WebDAV Is New Collaborative web-authoring Innovation) 웹데브 서버를 개발하였다. 공개 소프트웨어 기반인 아파치(Apache) 웹 서버에는 웹데브를 지원하기 위한 mod_dav 모듈을 제공하고 있다. DAVinci는 mod_dav 모듈의 서비스 제공자 형태로 추가되어 웹데브의 자원과 속성 관리를 담당한다. 본 시스템은 자원을 파일 시스템에 저장하고 속성 정보를 PostgreSQL 데이터베이스로 관리하며 추가적으로 자원과 속성들 간에 비일관성이 발생하지 않도록 보장하는 일관성 관리자(consistency manager)를 제공한다.

• Asian Journal of Innovation and Policy
• /
• 제5권1호
• /
• pp.55-77
• /
• 2016

This paper focuses on how an integrated or systemic approach is needed to both investigate and connect different kinds of interdisciplinary inquiry and knowledge within and beyond universities to encourage more productive collaboration with the other three ‘macro stakeholders’ - government, business, and the wider community. In this way universities can and should provide a greater leadership role in sustainability, innovation and policy studies. Such a framework is needed to also help to change the view of many that academics should just play a supporting role of providing specialised technical expertise only to the other macro stakeholders. The interdisciplinary and collaborative framework developed here is applied to the on-going water crisis in Malaysia - an exemplary complex problem-solving basis for seeking sustainable policy solutions to diverse challenges. As further discussed, this was applied also in practice to a multi-stakeholder seminar on addressing the difficult policy challenges of the Malaysian water industry and sector.