• 제목/요약/키워드: Cold resistance

검색결과 517건 처리시간 0.031초

소맥품종에 있어서 발아종자의 Amylase 활력과 내한성에 관한 연구 (Studies and on relationship between Amylase activities winter hardiness of germinating seeds in winterwheat varieties)

  • 원종익
    • 한국작물학회지
    • /
    • 제7권1호
    • /
    • pp.123-127
    • /
    • 1969
  • 소맥품종의 내한성 정도를 간이하게 판정할 수 있는 연구로서 내한성정도가 이미 알려진 3계급 9품종을 대상으로 하여 발아종자의 Amylase 활력의 강약과 품종의 내한성 정도와의 관계를 5시기 별로 시험했든바 그 성적을 요약하면 다음과 같다. 1. 각 시기별로는 Amylase 활력에 있어 유의차를 나타내지 않았으나 각품군간에는 고도의 유의차가 인정되었다. 2. 내한성에 강한 품종인 수원8005, 진광, 육성003는 다른 2군의 품종군보다 높은 Amylas의 활력을 보여주었고 내한성이 약한 품종인 적달마, 강도신력, 농촌004는 낮은 Amylase 활력을 나타냈으며 내한성이 중간정도인 농림006, 강도, 농림1002는 중간정도의 활력을 나타내었다. 3. 포장조건에서 내한성 정도가 같아보이는 품종간에서도 Amylase 활력을 강약이 인정되어 보다 세밀한 분류가 가능했다. 4. 시기별로 보면 제1~2일 째에서는 내한성 강, 중, 약 3품종군중 Amylase 활력의 차가 크지 않았으나 3일째에 3품종군간에 더욱 명백한 Amylase 활력의 차를 보여 주었고 제4일과 제5일에는 다시 낮아졌으며 포장의 냉해정도와도 시기에 관계없이 고도의 부의 상관을 인정할수 있었으며 3일째에서 가장 높았다. 5. 고로 발아후 3일에 나타난 결과에 의거 Amylase 활력의 차로 내한성의 강, 중, 약을 구명하는 것이 가장 알맞은 것으로 보이며 내한성판별의 기준으로써 효율적 편법으로 인정되었다.

  • PDF

EFFECT OF HEAT CURING METHODS ON THE TEMPERATURE HISTORY AND STRENGTH DEVELOPMENT OF SLAB CONCRETE FOR NUCLEAR POWER PLANT STRUCTURES IN COLD CLIMATES

  • Lee, Gun-Che;Han, Min-Cheol;Baek, Dae-Hyun;Koh, Kyung-Taek
    • Nuclear Engineering and Technology
    • /
    • 제44권5호
    • /
    • pp.523-534
    • /
    • 2012
  • The objective of this study was to experimentally investigate the effect of heat curing methods on the temperature history and strength development of slab concrete exposed to $-10^{\circ}C$. The goal was to determine proper heat curing methods for the protection of nuclear power plant structures against early-age frost damage under adverse (cold) conditions. Two types of methods were studied: heat insulation alone and in combination with a heating cable. For heat curing with heat insulation alone, either sawdust or a double layer bubble sheet (2-BS) was applied. For curing with a combination of heat insulation and a heating cable, an embedded heating cable was used with either a sawdust cover, a 2-BS cover, or a quadruple layer bubble sheet (4-BS) cover. Seven different slab specimens with dimensions of $1200{\times}600{\times}200$ mm and a design strength of 27 MPa were fabricated and cured at $-10^{\circ}C$ for 7 d. The application of sawdust and 2-BS allowed the concrete temperature to fall below $0^{\circ}C$ within 40 h after exposure to $-10^{\circ}C$, and then, the temperature dropped to $-10^{\circ}C$ and remained there for 7 d owing to insufficient thermal resistance. However, the combination of a heating cable plus sawdust or 2-BS maintained the concrete temperature around $5^{\circ}C$ for 7 d. Moreover, the combination of the heating cable and 4-BS maintained the concrete temperature around $10^{\circ}C$ for 7 d. This was due to the continuous heat supply from the heating cable and the prevention of heat loss by the 4-BS. For maturity development, which is an index of early-age frost damage, the application of heat insulation materials alone did not allow the concrete to meet the minimum maturity required to protect against early-age frost damage after 7 d, owing to poor thermal resistance. However, the combination of the heating cable and the heat insulating materials allowed the concrete to attain the minimum maturity level after just 3 d. In the case of strength development, the heat insulation materials alone were insufficient to achieve the minimum 7-d strength required to prevent early-age frost damage. However, the combination of a heating cable and heat insulating materials met both the minimum 7-d strength and the 28-d design strength owing to the heat supply and thermal resistance. Therefore, it is believed that by combining a heating cable and 4-BS, concrete exposed to $-10^{\circ}C$ can be effectively protected from early-age frost damage and can attain the required 28-d compressive strength.

콘크리트의 역학적 성능 및 공극구조가 스케일링 저항성에 미치는 영향 (Influence of Mechanical Properties and Pore Structure on the Scaling Resistance of Concretes)

  • 이승태
    • 한국산학기술학회논문지
    • /
    • 제17권1호
    • /
    • pp.111-118
    • /
    • 2016
  • 스케일링은 겨울철 제설제 살포 및 동결융해의 복합작용으로 인하여 교통시설 구조물에서 발생하는 대표적인 콘크리트의 성능저하 현상이다. 본 논문에서는 콘크리트의 스케일링 저항성에 영향을 미치는 요인을 분석하기 위하여 콘크리트의 역학적 성능, 공극구조 특성과 스케일링 저항성과의 관계를 실험적으로 고찰하였다. 실험결과, 콘크리트의 스케일링 저항성은 콘크리트의 압축강도와는 그다지 상관관계가 적었으며, 오히려 콘크리트의 표면투수 특성과 밀접한 관련이 있는 것으로 조사되었다. 또한, 콘크리트의 스케일링 저항성을 평가하기 위한 파라미터로써, 기포 간극계수 및 비표면적은 적합하지 않은 것으로 나타났다. 한편, 결합재의 종류에 따른 스케일링 저항성도 상이하게 나타났으며, 보통포틀랜드시멘트 콘크리트 및 실리카흄 콘크리트에 비하여 고로슬래그미분말을 사용한 콘크리트의 스케일링 저항성이 상대적으로 낮은 것으로 나타났다.

표면조도 특성에 따른 저항 점 용접성 평가 및 너깃 형성 고찰 (Evaluation on Resistance Spot Weldability and Nugget Formation of Surface Roughness Treated Steel Sheet)

  • 김기홍;최영민;김영석;임영목;유지훈;강남현;박영도
    • Journal of Welding and Joining
    • /
    • 제26권5호
    • /
    • pp.79-89
    • /
    • 2008
  • With the increased use of surface textured steel sheet in body-in-white assembly, resistance spot weldability of these steels is considered to be an important subject. This study evaluated nugget formation and weldability by measuring dynamic resistance with various weld pressure, current, and weld time for steel sheet with two different surface roughnesses. The surface roughness for T-H steel ($R_{a}=1.70\;{\mu}m$) was higher than that for T-L steel ($R_{a}=1.33\;{\mu}m$), and resulted in increased contact resistance and heating for T-H steel spot welding. Therefore, at low weld current and weld cycle ranges, the T-H steel showed better weldability over the T-L steel. The evaluations of weld interface showed that the fusion zone in the T-H steel sheet was continuous in contrast to discontinuous fusion zone for T-L steel sheet at the same welding conditions. A comparison of dynamic resistance and tensile-shear strength (TSS) between T-H and T-L steel sheet suggested that high surface roughness provided larger heating at early cycle of welding and larger TSS.

인산 에스테르게 난연제 BDPDH를 첨가한 CPE 고무재료의 난연성 및 내열성 (Flame Retardance and Thermal Resistance of CPE Rubber Compound Containing a Phosphoric Ester Flame Retardant BDPDH)

  • 박현호;이창섭
    • Elastomers and Composites
    • /
    • 제38권1호
    • /
    • pp.72-80
    • /
    • 2003
  • 자동차 Oil cooler용 호스를 구성하는 고무재료의 내열 및 난연성을 향상시키기 위하여 인산 에스테르계 화합물을 내열 및 난연제로 하여 제조한 염소화 폴리에틸렌(CPE) 배합고무의 가황 특성, 물리적 성질, 내열성, 난연성 및 변량효과를 조사하였다. 호스용 고무재료는 기존의 ethyleneacrylate rubber(EAR)보다 화학적 내식성과 내한성이 우수하면서도 가격이 저렴한 CPE 고무재료를 사용하였으며, 난연제는 비할로겐 축합 인산 에스테르계인 N,N'-bis-(diphenylphosphoro) diaminohexane(BDPDH)를 합성하여 CPE 고무재료와 $0{\sim}30 phr$ 범위에서 혼련하였다. 배합고무시편의 경도, 인장강도, 신율, 인장응력 및 열적 특성을 측정한 결과, CPE 배합고무의 유동성, 난연성, 내열성이 향상되었음을 확인하였으며, 고무재료 규격을 초과하지 않는 범위 내에서 최대의 내열 및 난연 효과를 주는 BDPDH의 배합량은 20 phr로 나타났다.

국소한냉자극이 전신 및 국소혈액순환에 미치는 영향 -제 2 보 : 동계 및 하계의 계절변화에 따른 한냉반응- (Cold Pressor Response to Seasonal Variation in Winter and Summer)

  • 박원균;채의업
    • The Korean Journal of Physiology
    • /
    • 제17권2호
    • /
    • pp.93-101
    • /
    • 1983
  • 국소한냉자극이 전신 및 국소혈액순환에 미치는 영향과 동계에 있어서 한냉에 대한 적응을 관찰하기 위하여 동계 및 하계에 편균연령 21세의 남녀 대학생 각 60명 및 50명을 대상으로 $5^{\circ}C$의 냉수에 일측 손을 담구어 3분간 국소한냉자극을 가하였다. 침수 1, 2, 3분과 회복기 1, 3, 5분에 침수한 측과 침수 반대측에서 평균혈압, 분시심박수, 광전 모세혈관 맥박의 파고, 피부전기저항을 관찰하여 다음과 같은 결과를 얻었다. 국소한냉자극시 혈압은 증가하였고 하계에서 동계보다 더 큰 증가를 보였다. 회복기에 동계는 서서히 대조치로 회복되나 하계에는 대조치보다 유의하게 감소하였다. 분시심박수는 침수시 증가하며 하계에서 동계보다 더 증가하였고 회복기에는 동계 및 하계 모두 대조치보다 감소하였다. 광전 모세혈관 맥박의 파고는 동계에는 침수 및 침수 반대측 모두 감소하였으나 침수한 측에서 더 크게 감소하였으며 이는 침수한 측에 있어서 한냉의 국소효과에 기인한 것으로 보인다. 하계에는 동계보다 작은 감소를 보였으며 회복기에는 더 빠른 회복을 보여 대조치보다 증가하였다. 피부전기저항은 침수시 침수 반대측에서는 감소하나 침수한 측에서는 유의하게 증가하였다가 회복기에 서서히 감소하였다. 침수 반대측의 감소는 동통에 의한 반응이 한냉에 의한 반응에 첨가되어 나타난 것으로 보이며, 침수한 측은 한냉에 의한 국소효과가 크기 때문인 것으로 보인다. 이상으로 $5^{\circ}C$의 국소한냉자극시 전신적 반응은 한냉자극에 의한 동통성 stress에 기인한 반응이 우세한 것으로 생각되며 김 등$^{39)}$의 보고와는 달리 동계 및 하계의 반응의 차이는 계절에 따른 한냉자극에 대한 주관적 감각의 차이에 의한 것으로 동계에서 한냉기후에 의한 국소한냉자극의 적응현상은 나타나지 않는 것으로 사료된다.

  • PDF

영하의 저온에 노출된 'Campbell Early'와 'Muscat Bailey A' 포도나무 신초의 전사체 비교 (Transcriptomic analysis of 'Campbell Early' and 'Muscat Bailey A' grapevine shoots exposed to freezing cold stress)

  • 김선애;윤해근
    • Journal of Plant Biotechnology
    • /
    • 제43권2호
    • /
    • pp.204-212
    • /
    • 2016
  • 환경스트레스 중의 하나인 저온에 대한 생육기의 포도나무의 반응을 분석하고자 -$2^{\circ}C$에서 4일 동안 저온처리 한두 품종('Campbell Early'와 'Muscat Baily A')의 포도나무잎을 이용하여 전사체를 분석하였고 특이발현유전자(differentially expressed genes, DEGs)를 검색하였다. 영하의 저온에 반응한 'Campbell Early'의 DEG를 기능별로 분석한 결과 생물대사에서 17,424개, 세포구성에서 28,954개, 분자기능에서는 6,972개의 유전자와 관련이 있었다. 발현이 유도되는 유전자로는 dehydrin xero 1, K-box region and MADS-box transcription factor family protein과 MYB domain protein 36이 있으며, 억제되는 유전자로는 light-harvesting chlorophyll B-binding protein 3, FASCICLIN-like arabinoogalactan 9와 pectin methylesterase 61 등이 있었다. 'Muscat Baily A'의 DEG는 생물대사에서 1,157개, 세포구성에서 1,350개, 분자기능에서는 431개의 유전자와 관련이 있었다. 발현이 유도되는 유전자로는 NB-ARC domain-containing disease resistance protein, fatty acid hydrozylase syperfamily와 isopentenyltransferase 3이 있으며, 억제되는 유전자로는 binding, IAP-like protein 1과 pentatricopeptide repeat superfamily protein 등이 있었다. Real-time PCR을 이용하여 영하의 저온에서 특이적으로 발현하는 유전자들을 검정하였으며, InterPro Scan을 통해 단백질 도메인을 분석한 결과 두 품종 모두에서 ubiquitin-protein ligase가 가장 많았다. 영하의 저온에 노출된 신초의 전사체 정보를 바탕으로 포도나무에서 저온 내성을 발현하는 기작을 연하는 데에 분자수준의 정보를 제공하고, 내한성 포도를 육종하는데 이용될 수 있을 것이다.

저관리형 옥상녹화를 위한 상록 지피식물의 내한성 평가 (Cold Tolerance Assessment of Ever Ground-cover Plants for Extensive Green Roof System)

  • 조홍하;이홍;손희준;강태호
    • 한국조경학회지
    • /
    • 제40권4호
    • /
    • pp.127-134
    • /
    • 2012
  • 이 연구는 저관리 경량형 옥상녹화시스템을 위한 내한성 식물 선발을 목적으로 6종 식물을 대상으로 저온 처리시간과 온도에 따라 전해질 용출 평가와 재생 검사를 연구하였다. Logistic 비선형 회귀분석을 이용하여 전해질 용출 평가를 통하여 치사 온도는 $-16.1{\sim}-24.4^{\circ}C$ 범위로 예측되었으며, 저온에 대한 저항성은 Sedum reflexum > S. spurium > Ophiopogon japonicus > S. album > S. takevimense > Dianthus chinensis의 순으로 나타났다. 2012년 2월 최저 온도인 $-13.4^{\circ}C$에 모든 식물의 전해질 용출은 50% 이하로 나타났으며, 겨울철 최적기온 $-13.5^{\circ}C$ 이상의 지역에서 식물들을 옥상에서 안정적으로 생육될 수 있을 것으로 예측되었다.

Cloning, Expression, and Characterization of a Cold-Adapted Lipase Gene from an Antarctic Deep-Sea Psychrotrophic Bacterium, Psychrobacter sp. 7195

  • Zhang, Jinwei;Lin, Shu;Zeng, Runying
    • Journal of Microbiology and Biotechnology
    • /
    • 제17권4호
    • /
    • pp.604-610
    • /
    • 2007
  • A psychrotrophic strain 7195 showing extracellular lipolytic activity towards tributyrin was isolated from deep-sea sediment of Prydz Bay and identified as a Psychrobacter species. By screening a genomic DNA library of Psychrobacter sp. 7195, an open reading frame of 954 bp coding for a lipase gene, lipA1, was identified, cloned, and sequenced. The deduced LipA1 consisted of 317 amino acids with a molecular mass of 35,210 kDa. It had one consensus motif, G-N-S-M-G (GXSXG), containing the putative active-site serine, which was conserved in other cold-adapted lipolytic enzymes. The recombinant LipA1 was purified by column chromatography with DEAE Sepharose CL-4B, and Sephadex G-75, and preparative polyacrylamide gel electrophoresis, in sequence. The purified enzyme showed highest activity at $30^{\circ}C$, and was unstable at temperatures higher than $30^{\circ}C$, indicating that it was a typical cold-adapted enzyme. The optimal pH for activity was 9.0, and the enzyme was stable between pH 7.0-10.0 after 24h incubation at $4^{\circ}C$. The addition of $Ca^{2+}\;and\;Mg^{2+}$ enhanced the enzyme activity of LipA1, whereas the $Cd^{2+},\;Zn^{2+},\;CO^{2+},\;Fe^{3+},\;Hg^{2+},\;Fe^{2+},\;Rb^{2+}$, and EDTA strongly inhibited the activity. The LipA1 was activated by various detergents, such as Triton X-100, Tween 80, Tween 40, Span 60, Span 40, CHAPS, and SDS, and showed better resistance towards them. Substrate specificity analysis showed that there was a preference for trimyristin and p-nitrophenyl myristate $(C_{14}\;acyl\; groups)$.

바이어스에 따른 임피던스 특성을 이용한 PHEMT의 기생 저항 추출방법에 관한 연구 (Studies on Extrinsic Resistance Extraction Method of PHEMT Using Bias-Dependence of Impedance)

  • 박덕수;안단;이진구
    • 대한전자공학회논문지TC
    • /
    • 제41권2호
    • /
    • pp.59-64
    • /
    • 2004
  • 본 논문에서는 바이어스에 따른 임피던스 특성을 설명하기 위해 Cold PHEMT 등가회로를 제안하였으며, 이를 이용하여 간단하고 정확하게 기생저항을 추출하는 방법을 제안하였다 제안된 방법은 주파수에 따른 임피던스 특성과 바이어스에 따른 임피던스 특성을 고려했으며, 쇼트키 배리어와 채널 캐패시턴스에 의한 리액턴스 성분의 영향이 최소가 되는 바이어스 점을 선택하여 추출하였다. 순방향 바이어스를 증가시켜 인가할 경우, 높은 주파수에서 수렴하는 임피던스 값이 증가하게 되어 실제 값보다 큰 값이 추출될 수 있으며, 역 바이어스를 증가시켜 인가할 경우에도 높은 주파수에서 수렴하는 임피던스 값이 낮아지지 않고 증가하는 경향을 갖기 때문에 실제 값보다 큰 값이 추출되게 된다. 따라서 이러한 영향이 최소화 될 수 있는 조건에서 추출되어야 한다. 또한 제안된 방법의 검증을 위하여 기존의 방법과 본 논문에서 제안한 방법을 비교하였다 기존의 방법과 본 논문에서 제안한 방법의 비교를 위해 각각의 방법으로 추출된 기생저항을 이용하여 소신호 모델링을 수행한 후에 측정된 S-파라메타와 비교하였으며, 그 결과 본 논문에서 제안한 방법이 기존의 방법에 비해 측정 결과와 잘 일치하였다.