• 전자공학회논문지
• /
• 제54권4호
• /
• pp.44-49
• /
• 2017

헬스케어 및 의료분야를 위한 배터리 기반 웨어러블 디바이스가 많이 제품화되고 있으나, 효과적인 전력 관리 미흡으로 자주 충전해야 하는 사용자의 불편함이 존재한다. 본 연구에서는 HW에서 제공하는 전력 관리 회로도를 효과적으로 활용할 수 있는 Tickless 기반 운영체제 및 전력 관리 알고리즘을 제시하고, 보드 레벨에서 최소 전력을 소모하는 Cold Restart 기법을 제안한다. 제안된 기법의 운영체제는 기존 운영체제에 비해 웨어러블 디바이스의 응용을 모델링한 4가지 시나리오에서 2배에서 최대 33배의 전력 소모 절감을 가져왔다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2003년도 학술대회논문집
• /
• pp.185-190
• /
• 2003

The most shortcoming of metalhalide lamps is what the instant restarting cannot be realized when the arc tube is in the hot condition. The discharge starting voltage of arc tube in the hot condition is much higher than in the cold condition. Therefore it takes about five minutes to restart the metalhalide lamps, that is to say, it is possible to start when the pressure and the temperature are decreased. But, if the lamp is restarted in the hot condition, we must supply the high voltage pulse with 20kV at the both sides of lamp. The proposed electronic ballast is consist of a electromagnetic interference (EMI) filter, a power factor correction (PFC) circuit, a flyback converter, a half-bridge inverter, and a high voltage igniter circuit. By this composition we can restart the lamp with the voltage 20kV, even if the lamp is in the hot condition.

• International Journal of Automotive Technology
• /
• 제7권4호
• /
• pp.407-413
• /
• 2006

The liquefied petroleum gas(LPG), mixture of propane and butane, has the potential to reduce toxic hydrocarbon emissions and inhibit ozone formation due to its chemical composition. Conventional mixer systems, however, have problems in meeting the future lower emission standards because of the difficulty in controlling air-fuel ratio precisely according to mileage tar accumulation. Liquid Phase LPG injection(LPLi) system has several advantages in more precise fuel metering and higher engine performance than those of the conventional mixer type. On the other hands, leakage problem of LPLi system at the injector tip is a main obstacle for meeting more stringent future emission regulations because these phenomena might cause excessive amount of THC emission during cold and hot restart phase. The main focus of this paper is the development of a leaked fuel recirculation system, which can eliminate the leaked fuel at the intake system with the activated carbon canister. Leaked fuel level was evaluated by using a fast response THC analyzer and gas chromatography. The result shows that THC concentration during cold and hot restart stage decreases by over 60%, and recirculation system is an effective method to meet the SULEV standard of the LPLi engine.

• 산업기술연구
• /
• 제20권B호
• /
• pp.169-174
• /
• 2000

The most of metalhalide lamps is what the momentary restarting cannot be realized when the arc tube is in the hot condition. The discharge starting voltage of arc tube in the hot condition is much higher than in the cold condition in proportion to the gaseous pressure. Therefore it takes about ten minutes to restart the metal Halide lamps, that is to say, it is possible to start when the pressure and the temperature are decreased. But, if the lamp is restarted in the hot condition, we must supply the high voltage pulse with 15kV between the both electrodes of lamp. The proposed ignitor has two ignitors. If we connect each ignitor at the both sides, the high voltages of two different frequencies are generated. If so, when the one of the ignitor generates the highest voltage and the other applied to elecrodes of the lamp. In this way, we can restart the lamp with the voltage 15kV, even if the lamp is in the hot condition.

• 조명전기설비학회논문지
• /
• 제18권5호
• /
• pp.9-15
• /
• 2004

메탈핼라이드 램프의 가장 큰 단점중 하나는 아크튜브가 뜨거운 상태에서는 순시 재점등이 불가능하다는 것이다. 메탈핼라이드 램프의 점등중 고온의 아크튜브는 초기 램프가 차가운 상태에서의 방전 전압보다 재점등 방전전압이 높아 재점등 시키는데 압력과 온도가 감소되어지는 약5분정도의 시간이 소요 된다. 만약 램프가 뜨거운 상태에서 재점등시키려면 램프전극 양단에 약20[kV] 이상의 높은 전압펄스를 공급해야한다. 따라서 이러한 목적의 전자식 안정기는 EMII필터, PFC회로, 플라이백 컨버터, 하프브리지 인버터, 고전압 이그나이터 회로로 구성되는데 이것은 순시점등은 물론 램프가 뜨거운 상태에서도 20[kV]의 전압으로 램프를 점등/재점등 할 수 있다.