• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.1
• /
• pp.35-46
• /
• 2008

Harmonic vibration characteristics for the general rotor model having a breathing crack are analyzed. Analyses are performed at the half critical speed ranges. The vibration characteristics are explained by using the additional slope and bending moment at the crack position and the influence coefficient showing the structural dynamic characteristics of the rotor. With the low crack depth the magnitude of the additional slope is kept constant even at the speed range at which the orbit magnitude is very sensitive to the rotational speed change. At this speed range the vibration is affected by the influence coefficient only. As the dynamic bending moment exceeds the static bending moment with the increase of crack depth. the additional slope affects the vibration amplitude of cracked rotor and the crack propagation rate increases.

• Journal of Advanced Marine Engineering and Technology
• /
• v.20 no.2
• /
• pp.108-108
• /
• 1996

This paper describes a new approach to solve balancing of a rigid rotor. In this paper, the balancing of the rigid rotor using genetic algorithms, which are search algorithms based on the mechanics of natural selection and natural genetics is proposed. Under the assumption that the initial vibration values used to calculate correction masses contain errors, the influence coefficient method, the least squares method and a genetic algorithm are compared. The results show that the vibration amplitude obtained with the least squares method and the genetic algorithm is smaller than that obtained with the influence coefficient method.

• Journal of Advanced Marine Engineering and Technology
• /
• v.20 no.2
• /
• pp.40-47
• /
• 1996

This paper describes a new approach to solve balancing of a rigid rotor. In this paper, the balancing of the rigid rotor using genetic algorithms, which are search algorithms based on the mechanics of natural selection and natural genetics is proposed. Under the assumption that the initial vibration values used to calculate correction masses contain errors, the influence coefficient method, the least squares method and a genetic algorithm are compared. The results show that the vibration amplitude obtained with the least squares method and the genetic algorithm is smaller than that obtained with the influence coefficient method.

• Nuclear Engineering and Technology
• /
• v.55 no.11
• /
• pp.4102-4111
• /
• 2023

In order to better perform thermal hydraulic calculation and analysis of supercritical water reactor, based on the experimental data of supercritical water, the model training and predictive analysis of the heat transfer coefficient of supercritical water were carried out by using the support vector machine (SVM) algorithm. The changes in the prediction accuracy of the supercritical water heat transfer coefficient are analyzed by the changes of the regularization penalty parameter C, the slack variable epsilon and the Gaussian kernel function parameter gamma. The predicted value of the SVM model obtained after parameter optimization and the actual experimental test data are analyzed for data verification. The research results show that: the normalization of the data has a great influence on the prediction results. The slack variable has a relatively small influence on the accuracy change range of the predicted heat transfer coefficient. The change of gamma has the greatest impact on the accuracy of the heat transfer coefficient. Compared with the calculation results of traditional empirical formula methods, the trained algorithm model using SVM has smaller average error and standard deviations. Using the SVM trained algorithm model, the heat transfer coefficient of supercritical water can be effectively predicted and analyzed.

• Journal of Families and Better Life
• /
• v.33 no.5
• /
• pp.1-24
• /
• 2015

The purpose of this study was to investigate the effects of Engel coefficient, Angel coefficient and Schwabe index influencing Household head's life satisfaction. For this study, the data from the 8th analysis of the 2013 Korea Welfare Panel Survey conducted by Korea Institute for Health and Social Affairs were used. For the sample, 903 male Household heads with children under the age of 18, were selected. For statistical analysis, SPSS program (Ver. 21.0) was used. And for statistical methods, frequency and percentile, mean and standard deviation, Pearson's correlation, one way analysis of variance, Duncan's multiple range tests, multiple regression analysis were used. The findings are as follows. First, as a results of analyzing the food costs, education costs and housing costs depending on Income Quintile, the food costs and education costs in the 5th Income Quintile compared with other Income Quintile, were highest. Also, the highest housing cost was in the 2nd Income Quintile, while the least housing cost was in the 1st Income Quintile. Second, by analyzing the differences of Engel coefficient, Angel coefficient and Schwabe index according to Income Quintile, the results show that Engel coefficient and Schwabe index decreases as Income Quintile increases, and Angel coefficient increases as Income Quintile becomes higher. Third, the level of HH's life satisfaction according to Income Quintile, 1st Income Quintile, 2nd Income Quintile, 4th Income Quintile, 3rd Income Quintile, 5th Income Quintile in order, increased. Fourth, as the result of analyzing the influence of Variables related to household and demographics about Engel coefficient, Angel coefficient and Schwabe index, it was shown that the variables effecting Engel coefficient, Angel coefficient, and Schwabe index are age, occupations, Number of workers, House ownership, Income Quintile. Fifth, As a result of analyzing the Variables effecting life satisfaction, especially while Schwabe index is not that significant, Engel coefficient and Angel coefficient are shown to have a significant influence. Therefore, the influence of Food costs and education costs can be confirmed.

• Wind and Structures
• /
• v.24 no.1
• /
• pp.79-93
• /
• 2017

Wind-induced fluctuating internal pressures in a building with a dominant opening can be described by a second-order non-linear differential equation. However, the accuracy and efficiency of the governing equation in predicting internal pressure fluctuations depend upon two ill-defined parameters: inertial coefficient $C_I$ and loss coefficient $C_L$, since $C_I$ determines the un-damped oscillation frequency of an air slug at the opening, while $C_L$ controls the decay ratio of the fluctuating internal pressure. This study particularly focused on the value of loss coefficient and its influence factors including: opening configuration and location, internal volumes, as well as wind speed and approaching flow turbulence. A simplified formula was presented to predict loss coefficient, therefore an approximate relationship between the standard deviation of internal and external pressures can be estimated using Vickery's approach. The study shows that the loss coefficient governs the peak response of the internal pressure spectrum which, in turn, will directly influence the standard deviation of the fluctuating internal pressure. The approaching flow characteristic and opening location have a remarkable effect on the parameter $C_L$.

• Tribology and Lubricants
• /
• v.22 no.1
• /
• pp.40-46
• /
• 2006

This paper presents the influence coefficient method to predict the deflection of bump foil precisely in the sub-structure of AFB(air foil bearing). Heshmat has introduced the simple compliance model to calculate the deflection of bump foil. But this approach can not consider the deflection of bump foil at the edge of AFB, so elasto-hydrodynamic model is insufficient to analyze in case that the eccentricity ratio is greater than 1. Peng has used the average pressure and film thickness, but this approach is not also a realistic model. Influence coefficients of a bump is calculated by finite element method, and introduced in bump deflection equations of the performance analysis of air foil bearing. The effects of the influence coefficient on the bearing performance is discussed in detail for appropriate foil design.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.623-628
• /
• 2000

Since the influence coefficients method in balancing of rotors is developed with the basement of not the principle of rotor system dynamics, but the linear relationshop of between the measuring quantities and the unbalance quantities, field engineers can apply the method without additional understanding on the rotor dynamics. But the influence coefficients method is not robust to the measurement error. This paper proposes a new method for the two plane balancing of rigid rotor, based on the principle of rotor dynamics. And the kit for experiment is made by ourselves, and in order to measure in the same condition with it, we do a experiment three times. And then with the Response of gap sensor, the SNR(Signal and Noise) is compared and analyzed about measuring error between the influence coefficient method, and the new method, and it is proved that the new method is less robust than the influence coefficient method.

• The Journal of the Korea Contents Association
• /
• v.21 no.9
• /
• pp.299-311
• /
• 2021

The purpose of this study is to analyze the ripple effect of the Chinese education industry on the national economy by using the industry-related table of 2017 by the China Statistical Office to use it as policy data for revitalization of the Chinese education industry in the future. To achieve this purpose, 149 industries in the basic classification of the industry-related table were classified into 32 industries. Based on these classifications, by analyzing the production induction coefficient, sensitivity coefficient, influence coefficient, yield inducement coefficient, production tax induction coefficient, and labor induction coefficient, etc. The purpose of this study is to understand the relationship between different industries and to find out the economic impact of the Chinese education industry. The analysis results show that in 2017, the total production induction coefficient of China's education industry was 1.7188, the row total was 1.0626, the sensitivity coefficient was 0.01211, the influence coefficient was 0.01958, the income induction coefficient was 0.6667, the production tax induction coefficient was 0.035, and the final demand was 1 billion yuan. When this occurs, the labor induction coefficient shows a total of 31,254 persons (indirect 15,541 persons, direct 15,713 persons). Based on the analysis results, this study suggested the implications that government support, technology introduction and application of new operating models, policy regulations, and efficient supervision of the system and president are required for further development of the Chinese education industry.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1997.04a
• /
• pp.33-40
• /
• 1997

This study was undertaken to investigate tribology characteristics of the alumina ceramics($Al_2O_3$) for the vauiation of ambient condition such as air and distilled water. The results obtained were as follows. As the sliding speed increases, the friction coefficient in the air decreased due to the reduction of sheafing stress caused by the heat accumulation of contact interface. And the friction coefficient in the distilled water decreased due to an activation of the tribochemical reaction. As the contact load increases, the friction coefficient is small in the air due to temperature rise of the contact interface. However, at the low speed side in the distilled water, the friction coefficient holds a large value due to decrease of the tribochemical reaction. The friction surface of ceramics can be protected in the air by the influence of the oxides tansfered from STB2 and also in the distilled water by the influence of the corrosive productive hydroxides.