• The Journal of Fisheries Business Administration
• /
• v.16 no.1
• /
• pp.91-124
• /
• 1985

Mariculture is contrasted with inland aqua-culturing fisheries. It is defind as the Industry of rearing Aquaorganism in limited coastal area relatively shallow in depth. Then, It's coming into being realization of Mariculture in it is long in history that Mariculture was realized in Korea. But it is from the early part of 1960s, that this industry has normally developed. Owing to 200 miles economy-zone problems of coastal countries, the development of deep sea fishing was limited, so the Korean Government has now appreciated the importance of cultured industries in the field of coastal fisheries. And the Korean Mariculture the output of which was only 18, 000 M/T in '60s attained 540, 000M/T in 1980s, has now occupied its relative importance in Korean Fisheries Industry. So the purpose of this report is to suggest the prospect of technical development of mariculture in the future of Korea, through the analysis of the various problems that affect upon the individual management '||'&'||' fishing ground utilization, along with the appreciation of "how to extend of those technical innovation" and "how the fishermen's technique level is extended at this stage. According to this study, the result is summarized as follows. First, Maricultural technique is classified into 8 sub-techniques as follows, as shown in fig. 1.Fig. 1. The Formation structure of mariculture technique Second, the change of technical method of mariculture in coastal area of Korea has made as 5 stages; 1) Scattering of culturing organism 2) Culturing by putting stone and installing bamboo 3) Culturing by installing rope and seeding 4) Culturing of putting objectives in cages 5) Culturing fish by feed Third, the maricultural fisheries of Korea has about 70 years long in history. It began from 1910s. But at that time there was no special technique in aquaculture and its technique was confined in searching out the object of species. The species was laver, oyster ect.Forth, although realization of mariculture in Korea has been long time, it is of late from 1960s that this has been industrial with normal development, and its technique of mariculture has mainly has developed from 1970s. Its result not only contributed to the high growth in Korean ecconomy along with the well balanced development between industires, but also it played a great role for the resolution of nation's food problem. Especially maricultural production has shown its sustained annual increase of 13.8% during the last 20 years. So the portion of mariculture among total fisheries stucture was extended from 4.1% in the early 1960s to 22.4% in 1980s.Fifth, it could be safely said that such development in maricultural field is resulted from the activity of aquacultural institutes such as Fisheries Reseach '||'&'||' Development production of major kinds such as Oyster, Sea-mustard, and Laver etc. As well as in the innovation of aquaculturing method with synthetic fiber utilization. FRDA has played important role in the efficient propargation of new aquacultural technique.Sixth, as for the change in aquaculture structure and its during period between 1970s and 1980s, the private management participation shown 25% increase from household number of 45, 173 to 56, 268 in total number. And in the respect of the management scale, of their management decreased, while it showed an increase in relative large scale management, the increase over 3 employees compared with other fisheries field between '70s and 80s. This must be an major trait to be recorded, Now the data above mentioned are shown as in table 1 and 2.Table 1. The maricultural fishing ground development situation in 982.Table 2. The mariculture management as seen in the employmnet size in high seasion.Owing to the technical innovation, of the mariculture in coastal area new income of fishermen increased and it also is true that the number of fishermen participating in its industrialization increased. But the problem being from now on is the self-discharge of the destruction fishing ground considered resulted from rapid expansion in aquaculture industry and the preventive system of sentility of fishing ground. sentility of fishing ground.

• Journal of the Korean association of regional geographers
• /
• v.12 no.4
• /
• pp.449-460
• /
• 2006

This study aims to analyze distribution of natural lakes including lagoonal lake(lagoon) and tributary dammed lake(tributary lake) and calculate the size, morphology in order to interpret time-serial change of lakes using methodology of remote sensing images(1990s), GIS and topographic maps(1920s) in east coast of Korean Peninsular. Analysis results show that in 1990s, there are 57 natural lakes, with the total size of $75.62km^2$ over size $0.01km^2$. marine-origin lagoons are 48 with total size of $64.85km^2$, composing 85% of total natural lake, and the largest lagoon is Beonpo in Raseon City. Tributary lakes have been formed by damming of tributary channels by fluvial sand bars from main stream, located nearby at coastal zone, similar to lagoon sites. Large tributary lake, Jangyeonho, is developed in lava plateau dissection valley of Eorang Gun, Hamnam Province. There are more distributed at Duman River mouth$\sim$Cheongjin City, Heungnam City$\sim$Hodo Peninsular and Anbyeon Gun$\sim$Gangreung City. Geomorphometrically, correlation of size to circumference is very high, but correlation of size to shape irregularity is very low. The direction of lagoonal coast, NW-SE and NE-SW are predominated due to direction of tectonic structure and longshore currents. The length of the river into lake are generally short, maximum under 15km, and lake size is smaller, degree of size decreasing is higher. Geomorphic patterns of the lake location are classified as coast-hill range, coastal plain, coastal plain-channel valley, coastal plain-hill range and channel valley-hill range. During from 1920s to 1990s, change with lake size decreasing is highest at coastal plain-channel valley, next is coastal plain. Causes of the size decreasing are fluvial deposition from upper rivers and human impacts such as reclamation.

• Korean Journal of Remote Sensing
• /
• v.23 no.6
• /
• pp.559-566
• /
• 2007

The generation of precise digital elevation model (DEM) is very important in coastal area where time series are especially required. Although a LIDAR system is useful in coastal regions, it is not yet popular in Korea mainly because of its high surveying cost and national security reasons. Recently, precise DEM has been made using radar interferometry and waterline methods. One of these methods, spaceborne imaging radar interferometry has been widely used to measure the topography and deformation of the Earth. We acquired ALOS PALSAR FBD mode (Fine Beam Dual) data for evaluating the quality of interferograms and their coherency. We attempted to construct DEM using ALOS PALSAR pairs - One pair is 2007/05/22 and 2007/08/22, another pair is 2007/08/22 and 2007/10/22 with respective perpendicular baseline of 820 m, 312m and respective height sensitivity of 75 m and 185m at southern of Ganghwa tidal flat, Siwha- and Hwaong-lake over west coastal of Korea peninsula. Ganghwa tidal flat has low coherence between 0.3 and 0.5 of 2007/05/22 and 2007/08/22 pair. However, Siwha-lake and Hwaong-lake areas have a higher coherence value (From 0.7 and 0.9) than Ganghwa tidal area. The reason of difference coherence value is tidal condition between tidal flat area (Ganghwa) and reclaimed zone (Siwha-lake and Hwaong-lake). Therefore, DEM was constructed by ALOS PALSAR pair over Siwha-lake and Hwaong-lake. If the temporal baseline is enough short to maintain the coherent phases and height sensitivity is enough small, we will be able to successfully construct a precise DEM over coastal area. From now on, more ALOS PALSAR data will be needed to construct precise DEM of West Coast of Korea peninsular.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.33 no.6
• /
• pp.298-307
• /
• 2021

Typhoons occur intensively between July and October, and the sea level is the highest during this time. In particular, the mean sea level in summer in Korea is higher than the annual mean sea level about 14.5cm in the west coast, 9.0 to 14.5cm in the south coast, and about 9.0 cm in the east coast. When the rising the sea level and a large typhoon overlap in summer, it can cause surges and flooding in low-lying coastal areas. Therefore, accurate calculation of the surge height is essential when designing coastal structures and assessing stability in order to reduce coastal hazards on the lowlands. In this study, the typhoon surge heights considering the summer mean sea level rise (SH_m) was calculated, and the validity of the analysis of abnormal phenomena was reviewed by comparing it with the existing surge height considering the annual mean sea level (SH_a). As a result of the re-analyzed study of typhoon surge heights for BOLAVEN (SANBA), which influenced in August and September during the summer sea level rise periods, yielded the differences of surge heights (cm) between SH_a and SH_m 7.8~24.5 (23.6~34.5) for the directly affected zone of south-west (south-east) coasts, while for the indirect southeast (south-west) coasts showed -1.0~0.0 (8.3~12.2), respectively. Whilst the differences between SH_a and SH_m of typhoons CHABA (KONG-REY) occurred in October showed remarkably lessened values as 5.2~ 14.2 (19.8~21.6) for the directly affected south-east coasts and 3.2~6.3 (-3.2~3.7) for the indirectly influenced west coast, respectively. The results show the SH_a does not take into account the increased summer mean sea level, so it is evaluated that it is overestimated compared to the surge height that occurs during an actual typhoon. Therefore, it is judged that it is necessary to re-discuss the feasibility of the surge height standard design based on the existing annual mean sea level, along with the accurate establishment of the concept of surge height.

• Journal of the korean society of oceanography
• /
• v.33 no.3
• /
• pp.71-79
• /
• 1998

Silty tidal rhythmites were found from the upper Pleistocene sequence unconformably overlain by the Holocene tidal deposits within the macrotidal coastal zone of Youngjong Island, western coast of Korea. The rhythmites occur as vertically accreted, parallel and planar laminae that are 0.1-2.5 mm in thickness. Each lamina grades from coarse silt (mean grain size: 5-6.5 ${\phi}$) at the lower part into fine silt to mud (mean grain size: 6-7.5 ${\phi}$) at the upper part. The rhythmites can be classified into two types based on the patterns in laminar thickness variation. Type I is a bundle of 12-20 laminae in which laminar thickness varies sinusoidally. Type ll is an alternation of thick and thin laminae as a couplet. Type I is inferred as a product of varying tidal energy during a semimonthly (neap-spring) tidal cycle, in which thicker laminae were deposited during spring tides and thinner laminae were formed during neap tides. Type ll is interpreted to have been formed by asymmetric semidiurnal tidal currents in association with diurnal inequality, whereby thick lamina of each couplet represents dominant tidal current and the thin lamina reflects subordinate tidal current.

• 한국해양학회지
• /
• v.11 no.2
• /
• pp.89-95
• /
• 1976

Some factors of seawater such as water temperature, salinity, pH, dissolved oxygen and asturation of dissolved oxygen were determined in 5 meters intervals from surface to bottom at 11 stations in Yeongil Bay of Korea during late October 1973. Distribution pattern of water masses in Yeongil Bay during the period seemed to be heterogeneous as dividing into two parts of surface and bottom. Water temperature, pH, dissolved oxygen and saturation of dissolved oxygen of surface water mass showed higher values and salinity of the mass showed lower values than those factors of bottom water mass. Surface water mass might be originated from Tsushima current during summer season and bottom water mass from cold body of East Sea of Korea which seemed to extend to coastal zone during winter season. Land water discharge from Hyeongsan River into the Bay is considered as a minor factor playing slight role in the water mass composition of the area.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.17 no.4
• /
• pp.283-291
• /
• 2012

The present work reviews some mechanism explaining how thin layer can develop in the near coastal zone. The existence of thin layer was observed by physical research methods later than classical biological approaches. The Richardson number, which is a ratio between the stratification and shear stress is crucial factor determining the occurrence of thin layer. Micro-structure turbulence seems to affect the plankton behavior, in particular the encountering rate. Encountering rate affects significantly feeding, reproduction etc. and this fact was proved by the mechanical simulation methods. Recently the Gyrotaxis was introduced to explain how thin layer occurs in the mixing layer. Such physical approaches to explain ecological problem will be prominent methods for marine ecological research area.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.10 no.3
• /
• pp.361-366
• /
• 2018

Ice crushing occurs in many situations that involve a sliding frictional component such as sports involving ice-contact, ice interaction with ship hulls, and ice-on-ice sliding/crushing within glaciers and between interacting sea ice floes. Ice crushing-friction tests were conducted in the lab at $-10^{\circ}C$ using a set of acrylic ice-crushing platens that included a flat smooth surface and a variety of high-roughness surfaces with regular arrays of small prominences. The experiments were part of Phase II tests of the Blade Runners technology for reducing ice-induced vibration. Ice was crushed against the platens where the ice movement had both a vertical and a horizontal component. High-speed imaging through the platens was used to observe the ice contact zone as it evolved during the tests. Vertical crushing rates were in the range 10-30 mm/s and the horizontal sliding rates were in the range 4.14-30 mm/s. Three types of freshwater ice were used. Friction coefficients were extraordinarily low and were proportional to the ratio of the tangential sliding rate and the normal crushing rate. For the rough surfaces all of the friction coefficient variation was determined by the fluid dynamics of a slurry that flowed through channels that developed between leeward-facing facets of the prominences and the moving ice. The slurry originated from a highly-lubricating self-generating squeeze film of ice particles and melt located between the encroaching intact ice and the surfaces.

• Journal of Korea Water Resources Association
• /
• v.33 no.6
• /
• pp.661-669
• /
• 2000

The accurate prediction of wave-induced currents is indispensible to analyze the beach deformation due to the sediment transport or dispersion in the surf zone, which often gives rises to serious environmental problems in the coastal region. Although many numerical models have been suggested up to now, it is not easy to properly simulate wave-induced currents, in particular, over a complex topography. In order to solve these problems, we have to understand the mechanism of wave transformation and wave-induced currents, to compare results numerical models with those of field measurements, and to find the validity and the applicability of them. And, also the validity of the model has been confirmed by the field investigation.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.2
• /
• pp.29-35
• /
• 2011

In order to effectively control waves in a coastal zone, Multi-Cylinder Piles have been suggested as economic structures. A numerical analysis was conducted using the Delft-3D: WAVE module based on SWAN, which considered wave shoaling and refraction. Moreover, irregular waves were used to investigate the hydrodynamic characteristics of the wave interaction with the structure. In this paper, a numerical analysis was carried out to research the effect of wave control through a wave height analysis concerning an existing, concrete wave breaker and multi-cylinder piles placed at the same location. As a result, the effect of the wave control is shown using the wave breaker, multi-cylinder piles, and existing data.