• 비파괴검사학회지
• /
• 제10권1호
• /
• pp.18-23
• /
• 1990

In materials with the large grain size, ultrasonic waves are highly attenuated by the grain boundary acting as scattering centers due to discontinuity of elastic constant. In this study, the improved probes were developed so that they minimized the effect of grain scattering in order to detect deep flaws in coarse grained materials. As the result, the developed ultrasonic transducers showed the better sensitivity and signal to noise ratio when compared with the commercial probes in testing the interior of coarse grained material.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.777-783
• /
• 2006

The coarse grained materials are used in various construction field such as express way back fill, Dam etc. Especially, for dam construction, a huge mount of rock fill materials are needed, so around domestic stony mountains are generally developed to produce materials. Not an accurate theory, but design criteria is based on empirical factors that were constructed in advance for design of dam especially Concrete Face Rockfill Dam(CFRD). Considering the post facts, the modified design criteria are essential in the future with more theoretical and experimental ways. In this study, large scale direct shear tests are performed with various relative density conditions on coarse grained material of Yecheon area to compare test results and general CFRD design factors.

• 한국지반신소재학회논문집
• /
• 제12권1호
• /
• pp.11-19
• /
• 2013

조립재료는 댐, 철도, 교량 구조물 건설시 제체, 성토재, 뒤채움재, 배수재 등으로 널리 사용되고 있으며, 이러한 구조물의 거동해석을 위한 수치해석을 위해 구성모델에 대한 연구가 다양하게 진행되어 왔다. 본 논문에서는 조립재료의 거동을 예측하기 위해 개발된 구성모델에 대한 변수 연구를 수행하였다. 구성모델은 한계상태이론에 근간한 bounding surface 모델로서 한 세트의 모델 정수를 활용하여 배수 조건, 구속압, 간극비에 상관없이 조립재료의 거동을 구현할 수 있는 장점을 지니고 있다. 구성모델은 탄성 파라미터, 한계상태 파라미터, 모델 고유파라미터를 활용하여 재료의 거동을 분석하며, 본 연구에서는 모델 고유 파라미터에 대한 변수 연구를 수행하였다. 변수 연구를 통해 구성모델이 조립재료의 가장 큰 특징인 비관계유통법칙(non-associative flow rule)에 따른 체적팽창 및 응력경로 변화에 따른 이동경화 현상을 적절히 모사할 수 있음을 파악하였다.

• Journal of Mechanical Science and Technology
• /
• 제16권10호
• /
• pp.1246-1252
• /
• 2002

Ultrafine grained (UFG) low carbon (0.15 wt.% C) steel produced by equal channel angula. pressing (ECAP) was tested for investigating the effect of load ratio on the fatigue crack growth rate. Fatigue crack growth resistance and threshold of UFG steel were lower than that of asreceived coarse grained steel. It was attributed to the less tortuous crack path. The UFG steel exhibited slightly higher crack growth rates and a lower △Kth with an increase of R ratio. The R ratio effect on crack growth rates and △Kth was basically indistinguishable at lower load ratio (R >0.3), compared to other alloys, which indicates that contribution of the crack closure vanishes. The crack growth rate curve for UFG steel exhibited a longer linear extension to the lower growth rate regime than that for the coarse grained as-received steel.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.1252-1258
• /
• 2005

The coarse grained materials which is produced in the domestic stony mountains are used as principle materials in the construction sites such as dams, ports, pavement structures and etc. Despite using of various fields like this, There is few apparatuses to experiment these materials in the country. some design parameters of the structures until these days was used from the result of former research abroad. Hereupon, We have developed the large scale direct shear test apparatus and we conduct research in order to get a shear strength of the coarse grained materials from the domestic stony mountains in Kyuong-gi, Choong-chung and Kyoung-sang province. As results of the test, it was revealed that the internal friction was ranging from $38.6^{\circ}$ to $44.5^{\circ}$ and the cohesion was from $1.1kg/cm^2$ to $1.7kg/cm^2$ depending on the local rock conditions.

• 한국지반환경공학회 논문집
• /
• 제9권5호
• /
• pp.53-59
• /
• 2008

본 연구에서는 대형직접전단시험을 이용하여 조립재료와 지오신세틱스 사이의 접촉면 마찰특성을 비교하여, 조립재료인 고둥껍질과 쇄석간의 조립재료특성을 파악하여 고둥껍질의 효용성을 높이는데 그 목적이 있다. 이 연구를 위하여 모형지반을 조립재료인 쇄석 또는 고둥껍질로 형성하여 부직포 또는 지오스트립 지오신세틱스를 포설 전단시켜 마찰계수와 마찰각을 비교 분석하였다. 분석결과 쇄석의 단위중량이 $13.7kN/m^3$ 일 때 $33.8^{\circ}$, 고둥껍질의 단위중량이 $5.4kN/m^3$ 일 때 $35.4^{\circ}$의 내부마찰각을 나타내었다. 또한 지오신세틱스와 쇄석의 접촉면 마찰각이 지오신세틱스와 고둥껍질 접촉면 마찰각보다 크게 나타났다.

• 한국분말재료학회지
• /
• 제3권4호
• /
• pp.233-245
• /
• 1996

Nanocrystalline materials, with a grain size of typically <100 nm, are a new class of materials with properties vastly different from and often superior to those of the conventional coarse-grained materials. These materials can be synthesized by a number of different techniques and the grain size, morphology, and composition can be controlled by controlling the process parameters. In comparison to the coarse-grained materials, nanocrystalline materials show higher strength and hardness, enhanced diffusivity, improved ductility/toughness, reduced, density, reduced elastic modulus, higher electrical resistivity, increased specific heat, higher coefficient of thermal expansion, lower thermal conductivity, and superior soft and hard magnetic properties. Limited quantities of these materials are presently produced and marketed in the US, Canada, and elsewhere. Applications for these materials are being actively explored. The present article discusses the synthesis, structure, thermal stability, properties, and potential application of nanocrystalline materials.

• 한국지반신소재학회논문집
• /
• 제12권1호
• /
• pp.63-72
• /
• 2013

필댐의 안정성은 댐 축조시 주재료로 활용되는 조립재료인 암석존(rock zone)의 공학적 거동에 의존하므로 조립재료인 rockfill 재료의 전단강도 뿐만 아니라 하중-변형 특성(stress-strain characteristics)을 보다 정확히 이해하여야 한다. 또한, 댐 제체의 거동을 예측하고 수치해석적으로 분석하기 위해서는 조립재료의 거동을 모사하기에 적합한 구성모델을 활용하기 위한 물성값 분석 및 모델 파라미터의 캘리브레이션 연구가 필요하다. 본 논문에서는 부항댐 제체 재료에 대한 대형삼축압축 실험결과를 분석하고 이를 기반으로 조립재료에 대한 구성모델 파라미터들을 분석하였다. 부항댐 제체 재료를 고밀도와 저밀도로 구분하여 시료를 제작하고 다양한 구속압으로 수행된 실험결과와 캘리브레이션 된 구성모델 시물레이션 결과를 상호 비교한 결과 MD 모델이 조립재료의 응력-변형률 거동을 효과적으로 모사할 수 있음을 파악하였다.

• Journal of Welding and Joining
• /
• 제31권6호
• /
• pp.44-49
• /
• 2013

The influence of thermo-mechanical cycling on the microstructure and strength in the weld coarse-grained heat affected zone (CGHAZ) of Ti-Nb added low carbon HSLA steel was explored through Vickers hardness tests, nanoindentation experiments, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analysis. Undeformed and deformed CGHAZs were simulated using Gleeble simulator with different heat inputs of 30kJ/cm and 300kJ/cm. At high heat input of 300kJ/cm, the CGHAZ consisted of ferrite and pearlite and then their grain sizes were not affected by deformation. At low heat input of 30kJ/cm, the CGHAZ consisted of lath martensite and then the sizes of prior austenite grain, packet and lath width decreased with deformation. In addition, the fraction of particle increased with deformation and this is because the precipitation kinetics was accelerated by deformation. Meanwhile, the Vickers and nanoindentation hardness of deformed CGHAZ with 30kJ/cm heat input were higher than those of undeformed CGHAZ, which are due to the effect of grain refinement and precipitation strengthening.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.126-129
• /
• 2005

Microstructures and tensile properties of low carbon steels, 5083 Al alloy and Ti-6Al-4V alloy fabricated by equal channel angular pressing (ECAP) were examined in order to understand their deformation response associated with a formation of an ultrafine grained (UFG) structure. Room temperature tensile properties of UFG low carbon ferrite/pearlite steels and UFG ferrite/martensite dual phase steel were compared for exploring a feasibility enhancing the strain hardening capability of UFG materials. In addition, low temperature and high strain rate superplasticity of the two grades of the UFG 5083 Al alloy, and Ti-6Al-4V alloy were presented. From the analysis of a series of experiments, it was found that UFG materials exhibited the enhanced mechanical properties compared to coarse grained counterparts.