References
- Agnew, S. R. and Weertman, J. R., 1998, 'Cyclic Softening of Ultrafine Copper.' Materials Sci. and Eng., Vol. 244, pp. 145-153 https://doi.org/10.1016/S0921-5093(97)00689-8
- Agnew, S. R., Vinogradov, A. Y., Hashimoto, S. and Weertman, J. R., 1999, 'Overview of Fatigue Performance of Cu Processed by Severe Plastic Deformation,' J. of Electronic Materials, Vol. 28, No. 9, pp. 1038-1044 https://doi.org/10.1007/s11664-999-0181-0
- Berbon, P. B., Komura, S., Utsunomiya, A., Horita, Z., Furukawa, M., Nemoto, M. and Langdon, T. G., 1999, 'An evaluation of Superplasticity in Aluminum-Scandium Alloys Processed by Equal-Channel Angular Pressing,' Mater. Trans. JIM, Vol. 40, No 8, pp. 772-778
- Boyce, B. L. and Ritchie, R. O., 2001, 'Effect of Load Ratio and Maximum Stress Intensity on the Fatigue Threshold in Ti-6A1-4V,' Eng. Fract. Mech., Vol. 68, pp. 129-147 https://doi.org/10.1016/S0013-7944(00)00099-0
- Budianski, B. and Huchinson, J. W., 1978, 'Analysis of Closure in Fatigue Crack Growth,' J. Appl. Mech. Trans. ASME, Vol. 45, pp. 267-276 https://doi.org/10.1115/1.3424286
- Cho, N. I., Lee, Y. B. and Chung, C. S., 1996, 'A Study on Fatigue Behavior Considering Effects of Redistributing Tensile Residual Stress and Crack Closure in SS330 Weldment,' Transactions of the KSME {A), Vol. 20, No. 7, pp. 2234-2245
- Elber, W., 1970, 'Fatigue Crack Closure Under Cyclic Tension,' Eng. Fract Mech., Vol. 2, pp. 37-45 https://doi.org/10.1016/0013-7944(70)90028-7
- McEvely, A. J. and Ritchie, R. O., 1998, 'Crack Closure and the Fatigue-Crack Propagation Threshold as a Function of Load Ratio,' Fatigue Fract. Eng. Mater. Struct., Vol. 21, pp. 847-855 https://doi.org/10.1046/j.1460-2695.1998.00069.x
- Park Kyung-Tae, Kim Yong-Seog, Lee Jung Gul and Shin Dong Hyuk, 2000, 'Thermal Stability and Mechanical Properties of Ultrafine Grained Low Carbon Steel,' Materials Sci. and Eng., Vol. A293, pp. 165-172 https://doi.org/10.1016/S0921-5093(00)01220-X
- Patlan, V., Vinogradov, A., Higashi, K. and Kitagawa, K., 2001, 'Overview of Fatigue Properties of Fine Grain 5056 Al-Mg Alloy Processed by Equal-Channel Angular Pressing,' Materials Sci. & Eng., Vol. A300, pp. 171-182 https://doi.org/10.1016/S0921-5093(00)01682-8
- Rabinovich, M. K. and Markushev, M. V., 1995, 'Influence of Fine Grained Structure and Superplastic Deformation on the Strength of Aluminium Alloys,' J. of Mater. Sci., Vol. 30, pp. 4692-5001 https://doi.org/10.1007/BF01153080
- Rice, J. R., 1967, 'Mechanics of Crack Tip Deformation and Extension by Fatigue,' ASTM STP 415, p. 247
- Suresh, S., 1991, 'Fatigue of Materials,' Cambridge University Press
- Valiev, R. Z., Kozlov, E. V., Ivanov, Y. F., Lian, J., Nazarov, A. A. and Baudelet, B., 1994, 'Deformation Behavior of Ultrfine-Grained Copper,' Acta Metall. Mater., Vol. 42, No. 7, pp. 2467-2475 https://doi.org/10.1016/0956-7151(94)90326-3
- Vinogradov, A., Nagasaki, S., Patlan, V., Kitagawa, K. and Kawazoe, M., 1999, 'Fatigue Properties of 5056 Al-Mg Alloy Produced by Equal-Channel Angular Pressing,' NanoStructured Materials, Vol. 11, No. 7, pp. 925-934 https://doi.org/10.1016/S0965-9773(99)00392-X