• Macromolecular Research
• /
• 제13권6호
• /
• pp.499-505
• /
• 2005

Ordered mesoporous materials with a hydrothermally-stable, protozeolitic framework were prepared by exploring the direct conversion of inorganic species based on co-surfactant templating systems. To confer hydrothermal stability on the mesoporous aterials, the organic-inorganic hybrids were heat-treated in strongly basic media. Co-surfactant templating systems of cetyltrimethylammonium bromide [$C_{16}H_{13}(CH_{3})_{3}$NBr, CTAB] with 1,3,5-trim­ethylbenzene (TMB) or a nonionic block copolymer of poly(ethylene oxide )-b-poly(propylene oxide )-b-poly(ethyl­ene oxide) ($EO_{20}PO_{70}EO_{20}$) were employed to improve the hydrothermal stability of the organic-inorganic self-assembly during the solid rearrangement process of the inorganic species. The mesoscopic ordering of the pore structure and geometry was identified by X-ray diffraction, small angle neutron scattering and electron microscopy.

• Elastomers and Composites
• /
• 제23권1호
• /
• pp.11-17
• /
• 1988

The transport of chromium(VI) ion from waste water through the liquid surfactant membrane containing tri-n-octylamine as a carrier, was analyzed by a slab model and was investigated through experiments. For the experiment of membrane stability, concentrations of surfactant and liquid paraffin oil were analyzed. Extraction experiments were carried out to observe the effect of system variables, such as concentrations of carrier, and initial chromium(VI) ion in external aqueous phase at $25^{\circ}C$. It is concluded that the most stable formation of liquid membrane emulsion was obtained when surfactant concentration is above 3 wt.% and liquid paraffin oil concentration is 50 vol.%. The theoretical equation on the transport of chromium(VI) ion agreed well with the experimental results.

• Bulletin of the Korean Chemical Society
• /
• 제23권11호
• /
• pp.1579-1584
• /
• 2002

Since surfactant or emulsifiers remained on the nanoparticle surface significantly affect the physicochemical properties, the biodegradation rate, the biodistribution, and the biocompatibility of nanoparticles, surfactant-free nanoparticles should be good candidate. surfactant-free PLGA nanoparticles were successfully prepared by both the dialysis method and the solvent diffusion method. The PLGA nanoparticles prepared using the solvent diffusion method has a smaller particle size than the dialysis method. The solvent diffusion method was better for a higher loading efficiency than the dialysis method but the nanoparticle yield was lower. Testosterone (TST) release from the PLGA nanoparticles was dependent on the particle size rather than the drug contents. Testosterone release from the PLGA nanoparticles prepared by the solvent diffusion method using acetone was faster than those prepared by the dialysis method. TST release from the PLGA nanoparticles prepared by the solvent diffusion method using acetone and the dialysis method using dimethylformamide (DMF) was completed for 4 days while the PLGA nanoparticles prepared by the dialysis method using acetone showed approximately 80% TST release after 4 days. Since the PLGA nanoparticle degradation ratio was below 20% within 5 days at all samples while TST release completed within 4 days, TST release was dependent on the diffusion mechanism rather than degradation.

• 공업화학
• /
• 제28권2호
• /
• pp.186-192
• /
• 2017

본 연구에서는 OIMS90과 NP12 계면활성제 혼합물을 사용하여 물/벙커 C 오일 비율, 계면활성제 농도 및 조성, 유화 시간, 교반 속도 및 시간, 온도 등을 변화시키면서 유중수적형(water-in-oil, W/O) 에멀젼 연료를 제조하였다. OIMS90과 NP12 계면활성제 혼합물을 사용하여 제조한 에멀젼 연료는 벙커 C 오일에 비하여 미세먼지, $NO_2$, CO, $CO_2$ 및 $SO_2$ 등의 연소배기 가스 중의 대기 오염물 방출을 감소시키는데 효과적이며, 특히 계면활성제 조성 OIMS90/NP12 = 4 : 6, 계면활성제 농도 500 ppm, 수분 함량 10%을 사용하여 $80^{\circ}C$에서 제조한 에멀젼 연료가 배기가스 오염물 저감 효과가 가장 큰 것을 확인하였다. 또한 보일러 효율 측정 시험 결과, 에멀젼 연료가 벙커 C 오일과 비교하여 우수한 디젤 엔진 에너지 효율을 나타내었다.

• 폴리머
• /
• 제26권4호
• /
• pp.535-542
• /
• 2002

투석법을 이ctide-co-glycolide) (PLGA) 나노입자를 제조하고 다양한 용매에 따른 입자 크기, 약물 함유량, 생분해도 등과 같은 물리ㆍ화학적 특성을 조사하였다. Dimethylacetamide (DMAc), dimethylformamide (DMF), dimethylsulfoxide (DMSO)로 제조된 PLGA 나노입자의 크기는 acetone으로 제조한 입자보다 적었다. 또한, 약물 함유량은 DMAc>DMF>DMSO=acetone 순서였다. PLGA 나노입자는 scanning electron microscopy (SEM)과 transmission electron microscopy (TEM)의 측정으로 구형임을 알 수 있었다. 계면활성제를 사용하지 않는 나노입자에 봉입된 norfloxacin (NFx)은 X-ray diffraction 분석을 통하여 입자 표면에 약물을 가지지 않는 좋은 약물 봉입 효율을 가짐을 알 수 있었다. 모델약물로 사용된 NFx의 방출속도는 약물 함유량뿐만 아니라 입사크기에 의해 좌우된다. 또한 PLGA 나노입자의 분해속도는 아세톤보다는 DMF를 사용하였을 때 더 빠르며 이는 PLGA 나노입자의 생분해성도 입자크기에 좌우된다는 것을 알 수 있었다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 INTERNATIONAL SYMPOSIUM ON SOIL & GROUNDWATER ENVIRONMENT
• /
• pp.145-146
• /
• 2005

• 한국재료학회지
• /
• 제33권5호
• /
• pp.222-228
• /
• 2023

Transition metal oxides formed by a single or heterogeneous combination of transition metal ions and oxygen ions have various types of crystal structures, which can be classified as layered structures and non-layered structures. With non-layered structures, it is difficult to realize a two-dimensional structure using conventional synthesis methods. In this study, we report the synthesis of cobalt oxide into wafer-scale nanosheets using a surfactant-assisted method. A monolayer of ionized surfactant at the water-air interface acts as a flexible template for direct cobalt oxide crystallization below. The nanosheets synthesized on the water surface can be easily transferred to an arbitrary substrate. In addition, the synthesizing morphological and crystal structures of the nanosheets were analyzed according to the reaction temperatures. The electrochemical properties of the synthesized nanosheets were also measured at each temperature. The nanosheets synthesized at 70 ℃ exhibited higher catalytic properties for the oxygen evolution reaction than those synthesized at other temperatures. This work suggests the possibility of changing material performance by adjusting synthesis temperature when synthesizing 2D nanomaterials using a wide range of functional oxides, resulting in improved physical properties.

• Journal of Pharmaceutical Investigation
• /
• 제40권5호
• /
• pp.263-267
• /
• 2010

Nanoemulsions have been widely investigated for many years because of their attractive and unique characteristics. Nanoemulsions are composed of oil, surfactant, co-surfactant and water. Especially, cosurfactant plays a critical role in formation of nanoemulsions. In pharmaceutical area, a pre-concentrate form of nanoemulsions which is known as self-nanoemulsifying drug delivery systems (SNEDDS) was available for some water-insoluble drugs. In this study, we investigated the functional behaviors of cosurfactant in design of SNEDDS and nanoemulsions. Cremophor RH 40$^{(R)}$, Propylene carbonate and medium chain triglyceride were selected for surfactant, cosurfactant and oil, respectively. Cyclosporine was employed as a drug. Phase diagrams showed the area of isotropic o/w region which forms o/w nanoemulsions was not significantly affected by the compositional ratio of cosurfactant. But, drug solubilization capacity, droplet size of nanoemulsions and drug release rate were greatly affected by the cosurfactant.

• Korean Chemical Engineering Research
• /
• 제43권1호
• /
• pp.53-59
• /
• 2005

본 연구에서는 계면활성제를 이용하여 초임계이산화탄소와 전해도금액의 매크로에멀젼을 형성한 후 양극과 음극을 통해 통전시켜 초임계에멀젼 전해도금을 수행하였다. 계면활성제로는 친이산화탄소기와 친수기를 동시에 지닌 sodium salt of bis (2,2,3,3,4,4,5,5-octafluoro-1-pentanol) sulfosuccinate를 사용하였으며 (+)극과 (-)극으로 니켈판과 구리판을 각각 사용하였다. 초임계매크로에멀젼 상태에서 도금된 니켈표면과 기존의 상압 상태에서 도금된 니켈표면을 비교해 본 결과 이산화탄소/니켈도금액 매크로에멀젼에 의해 도금된 니켈표면은 기존 방법에 의한 것보다 더 균일하였다. 계면활성제의 농도와 도금액 양이 도금에 미치는 영향을 살펴보기 위하여 도금액에 첨가한 계면활성제의 농도를 2, 4, 7 wt% 변화시켰으며 도금 반응셀 내에서 차지하는 도금액의 부피를 10 vol%에서 70 vol%까지 증가시켰다. 그리고 연속상의 영향을 알아보기 위하여 초임계이산화탄소 대신에 프로판을 사용하여 그 결과를 살펴보았다. 매크로에멀젼이 형성되는 농도 이상에서는 계면활성제의 농도가 높아질수록 전류량과 도금되는 니켈 양이 모두 감소하였으며, 도금액의 부피가 증가할수록 전류량과 전기전도도가 높아지고 도금되는 니켈 양이 증가하였다. 또한, 연속상의 경우, 프로판보다 이산화탄소가 우수한 도금효과를 보임을 알 수 있었다.

• 한국식품과학회지
• /
• 제47권2호
• /
• pp.217-223
• /
• 2015

본 연구에서는 OSA-${\beta}$-glucan 유화제의 특성을 조사하기 위해 유화액을 제조하였다. 유화특성을 알아보기 위해 pH 변화, NaCl 첨가에 따른 유화액의 지방구 크기, 제타전위의 변화 등 이화학적 성질을 조사하였고, OSA-${\beta}$-glucan에 대한 co-surfactant 선정실험을 수행하였다. 그 결과, OSA-${\beta}$-glucan 유화액은 pH가 낮을수록, NaCl의 첨가량이 많을수록 응집으로 인해 안정도가 낮아지는 경향을 보였으며 이는 유화액의 제타전위 측정 및 현미경 관찰 결과와 일치하였다. OSA-${\beta}$-glucan 유화제에 적합한 co-surfactant는 유화 지방구 크기 및 크리밍 안정도 측면에서 Tween 20으로 확인되었으며 적절한 농도는 0.2% 이상으로 나타났다. 또한 Tween 20 첨가에 대한 OSA-${\beta}$-glucan 유화액의 안정도 향상은 유화지방구 표면에서 OSA-${\beta}$-glucan과 Tween 20의 co-adsorption에 기인한 것으로 추정하였다.