• Journal of the Semiconductor & Display Technology
• /
• v.6 no.4
• /
• pp.5-9
• /
• 2007

Phase transition and dopant redistribution during silicidation of $CoSi_2$ thin films were characterized depending on their preparation methods. Our results indicated that cleanness of the substrate surface played an important role in the formation of the final phase. This effect was found to be reduced by addition of W resulting in the formation of $CoSi_2$. However, even in this case, the formation of the final phase was achieved at the cost of extra thermal energy, which induced rough interface between the substrate and the silicide film. As for the dopant redistribution, the deposition sequence of Co and Si on SiGe was observed to induce significant differences in the dopant profiles. It was found that co-deposition of Co and Si resulted in the least redistribution of dopants thus maintaining the original dopant profile.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.145-145
• /
• 2015

처음 유기물의 인광 발견 이후 Host-dopant 시스템을 이용하여 Emission layer(EML)을 Co-deopsition 하는 방법으로 주로 인광 유기 발광 다이오드를 제작 하였다. [1] co-deposition을 이용해 만든 유기 발광 다이오드에 많은 장점이 있지만, 반대로 소자를 제작하는데 있어서는 많은 문제점을 가지고 있다. [2-4] 이러한 문제점을 개선하기 위하여 co-deposition 대신 non-doped Multi Quantum Well(MQW) 구조를 사용하여 doping 하지 않는 방법을 이용하는 논문들이 보고 되고 있다. Hole, electron, exciton이 MQW 구조를 지나면서, dopant well 안에 갇히게 되고, 그 안에서 다른 layer 간에 energy transfer와, hole-electron leakage가 줄어 들어, 더 효율적인 유기 발광 다이오드를 만들 수 있게 된다. [5-7] 이 연구에서는 CBP를 Potential Barrier로 사용하고, Ir(ppy)3 (Green dopant), Ir(btp)2 (Red dopant) 를 각각 Potential Well로 사용하였고, 두께는 CBP 9nm, dopant 1nm로 하였다. 이러한 소자를 만들고 dopant를 3개의 well에 적당히 배치하여, 각 well에서의 실험적인 발광 량 과, EML 안에서의 발광 mechanism 그리고 각 potential barrier를 줄여가며 dexter, forster에 의한 energy transfer에 대하여 알 수 있었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.948-951
• /
• 2007

In order to improve the performance of LCD, chiral dopant is added to liquid crystal mixture. When we decide the rubbing direction, we must consider the rotation direction of liquid crystal molecules by chiral dopant. When the rotation direction of liquid crystal molecules caused by dielectric torque decided by rubbing direction and that decided by chiral dopant are coincided, the performance of LCD would be improved along to our initial cell design intentions.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.149-149
• /
• 2015

본 연구에서는 Host 물질 Alq3와 Dopant 물질 Ir(piq)3, Zn(BTZ)2를 사용한 ITO/NPB/Alq3+ metal complexes/Alq3/LiF/Al 다층 구조의 PHOLED 소자를 제작하고 특성 변화를 파악하였다. Dopant Ir(piq)3를 발광 영역에 도핑하였을 경우에는 소자의 발광 효율이 감소하였다. 이는 Co-deposition 조건에 따른 분자간의 거리가 충분히 가까워지지 않았기 때문이다. 분자간의 거리가 Co-deposition 조건보다 멀게 되면 Host - Dopant 간의 에너지 전달이 제대로 일어날 수 없게 되며, 결과적으로 Host 영역과 Dopant영역에서 각각 발광을 하게 된다. Dopant Zn(BTZ)2를 도핑하였을 경우에는 Host - Dopant 간의 에너지 전달에 의한 효과로 인해, J-V 특성은 50% 이상, L-V 특성은 20% 이상, L-J 특성은 10% 이상 효율이 증가하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.4-6
• /
• 2003

We have developed the active matrix OLED displays with a high efficiency red emission material which uses an emitting assist (EA) dopant system. The EA dopant (rubrene) did not itself emit but assisted the energy transfer from the host ($Alq_s$) to the red emitting dopant(DCM2). A stable red emission (chromaticity coordinates: x=0.64, y=0.36) was obtained in this cell within the luminance range of 100 - 4000 $cd/m^2$ By using EA dopant system, we can realize the reduction of the power consumption of the OLED display..

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1997.05a
• /
• pp.12-12
• /
• 1997

• Journal of the Korean Ceramic Society
• /
• v.34 no.12
• /
• pp.1221-1226
• /
• 1997

The effects of sintering atmosphere and dopant addition on the behavior of densification and grain growth of SnO2 ceramics were investigated with consideration of defect chemistry. CoO and Nb2O5 were chosen as dopants, and oxygen and nitrogen were used for controlling of sintering atmospheres. With the decrease of oxygen partial pressure, densification was depressed due to evaporation of SnO2 ceramics. In the case of SnO2 sintering, the addition of CoO, which produced oxygen vacancy in SnO2 ceramics, led to acceleration of densification and grain growth. On the contrary, when Nb2O5 as a dopant producing Sn vacancy was added to SnO2 ceramics, densification and grain growth were simultaneously retarded. As results, it was conformed that diffusion of oxygen ions was rate determinant in densification and grain growth of SnO2 ceramics.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.04a
• /
• pp.223.2-223
• /
• 2003

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.667-670
• /
• 2003

Ni-silicide has low thermal stabiliy. This point is obstacle to apply NiSi to devices. So In this paper, we have studied for obtain thermal stability and analysis of dopant dependency of NiSi. And then we applied Ni-silicide to devices. To improvement of thermal stability, we deposit Ni70/Co10/Ni30/TiN100 to sample. Co midlayer is enhanced thermal stability of NiSi. Co/Ni/TiN, this structure show very difference between n-poly and p-poly in sheet resistance. But Ni/Co/Ni/TiN, structure show less difference. Also junction leakage is good.

• Korean Journal of Crystallography
• /
• v.13 no.2
• /
• pp.63-68
• /
• 2002

Zn/sub 2-x/Mn/sub x/SiO/sub 4/ phosphors for PDP were synthesized by solid state reaction method. The effects of firing temperature, ratio of hydrogen gas to nitrogen for heat treatment and concentration of activator and co-dopants on the luminous properties have been investigated. It was found that the phosphor fabricated at 1400℃ with x = 0.002 Mn concentration had a maximum brightness. Luminous properties of a phosphor were improved when Cr/sup 3＋/ was added as a co-dopant rather than other co-dopants.