Effects of Sintering Atmosphere and Dopant Addition on the Densifcation of $SnO_2$ Ceramics

첨가제와 소결분위기가 $SnO_2$ 요업체의 치밀화에 미치는 영향

  • 정재일 (경북대학교 무기재료공학과) ;
  • 김봉철 (경북대학교 무기재료공학과) ;
  • 장세홍 (전자부품종합기술연구소) ;
  • 김정주 (경북대학교 무기재료공학과)
  • Published : 1997.12.01

Abstract

The effects of sintering atmosphere and dopant addition on the behavior of densification and grain growth of SnO2 ceramics were investigated with consideration of defect chemistry. CoO and Nb2O5 were chosen as dopants, and oxygen and nitrogen were used for controlling of sintering atmospheres. With the decrease of oxygen partial pressure, densification was depressed due to evaporation of SnO2 ceramics. In the case of SnO2 sintering, the addition of CoO, which produced oxygen vacancy in SnO2 ceramics, led to acceleration of densification and grain growth. On the contrary, when Nb2O5 as a dopant producing Sn vacancy was added to SnO2 ceramics, densification and grain growth were simultaneously retarded. As results, it was conformed that diffusion of oxygen ions was rate determinant in densification and grain growth of SnO2 ceramics.

Keywords

References

  1. Thin Solid Films v.135 The Influence of Substrate Temperature and Sputtering Gas Atmosphere on the Electrical Properties of Reactively Sputtering Indium Tin Oxide Films S. Nishikawa
  2. J. Electrochem. Soc v.10 Physical Properties of SnO₂Materials:Ⅲ. Optical Properties Z.M.Jarzebski;J.P.Marton
  3. 요업학회지 v.28 no.9 탄화수소계 가스센서를 위한 $SnO_2-TiO_2$계 후막의 제조 정완영;박정은;강봉휘;이덕동
  4. 요업학회지 v.30 no.9 스퍼터링법으로 제조된 Pb-doped SnO₂박막의 수소가스 감도 특성 차경현;김영우;박희찬;김광호
  5. 요업학회지 v.27 no.5 항침 방법의 차이에 다른 Pd, $Pt-SnO_2$의 프로판 가스 감응성 변화 이종흔;박순자
  6. J. Am. Ceram. Soc v.77 no.4 Effect of Antimony Addition on Electrical and Optical Properties of Tin Oxide Film K.H. Kim;S.W. Lee;D.W. Shin;C.G. Park
  7. 요업학회지 v.23 no.5 화학증찹법에 의한 SnO₂Film의 전기적 및 광학적 성질 김광호;김태옥;천성순
  8. J. Phys. Soc. Jap v.13 no.3 Optical and Electrical Properties of Tin Oxide Films K Ishiguro.;T. Sasaki.;T. Arai
  9. Acta. Met v.22 no.3 A first Report on Sintering Diagram M.F Ashby
  10. Mat. Sci. Res v.16 Microstructure Evloution in SnO₂and CdO in Reducing Atmosphere T. Quadir;D.W. Readey;G.C. Kuczynski(ed.);A.E. Miller(ed.);G.A. Sargent(ed.)
  11. Sintering '85 Structure Evloution during the Sintering of $SnO_2$ and $SnO_2$-2mole% CuO J.A. Varela;O.J. Whittemore;M.J. Ball;G.C. Kuczynski(ed.);D.P. Uskokovic(ed.);H. Palmour Ⅲ(ed.);M.M. Ristic(ed.)
  12. J. Am. Ceram. Soc v.79 no.3 Effect of Cobalt(Ⅱ) Oxide and Manganese(Ⅳ)Oxide on Sintering of Tin(Ⅳ) Oxide J.A. Cern;E.R. Leite;D. Gouvea;E. Longo
  13. 4th Euro Ceram;Electroceramics v.5 Effect of the Additives on SnO₂Varistors J.A. Cern;M.S. Castro;C.M. Aldao;G. Gusmano(ed.);E. Traversa(ed.)
  14. Comm.Ceram. Inter v.10 no.3 Densification of Nonadditive SnO₃by Hot Isostatic Pressing S.J. Park;K. Hirota.;H. Yamamura
  15. Sintering '87 v.1 HIP of SnO₂ S.J. Park;K. Hirota.H. Yamamuta;Elsevier Applier Sci(ed.)
  16. J. Mater. Sci v.30 Sintering mechanisms of $0.99SnO_2-0.01CuO$ N. Dolet;J.M. Heintz;L. Rabardel;M. Onillon;J.P. Bonnet
  17. Solid State Phenomena v.25-26 The Effect of Additives on the Sintering of Tin Oxide J.A. Varela;D. Gouvea;E. Longo;N. Dolet;M. Onillon;J.P. Bonnet