• 대한수의학회지
• /
• 제38권1호
• /
• pp.71-76
• /
• 1998

The effects of chitosan on mastitis in lactating holstein cows were evaluated. Fifty six cows with intramammary infection(IMI) from nine farms were selected and the cows were fed with diets which contained 15~20g chitosan per day for 5~7 days. The milk samples were obtained from cows at 7 days and 14 days after administration to determine effect of the curing of mastitis and the reduction of somatic cell counts(SCC). The average value of SCC levels in quarter milk from the cows administrated with chitosan significantly decreased up to 31.8% and 47.7% at 7 and 14 days, respectively(P<0.05). The cure rates of chitosan for Stapylococcus aureus, coagulase-negative Staphylococci, Streptococci spp, other gram positive bacteria and coliforms were 30.4, 42.8, 33.3, 66.6 and 54.5 % respectively. Twenty three out of 64 cases were cured by feeding with chitosan. The results showed that administration of chitosan could reduce SCC in milk and improve cure rates of bovine mastitis caused by microorganisms. The further studies will be pursued to study on the mechanism of chitosan in the immune responses of cows with mastitis.

• 한국염색가공학회지
• /
• 제33권4호
• /
• pp.317-326
• /
• 2021

In this study, we investigated for Bio-EPDM foam with oyster shell surface modified earth coupling agent. Experiments were carried out to confirm the bio-EPDM/Oyster shell foam applying content of earth coupling agent. The cure characterization were evaluated by measuring the mooney viscosity and oscillating disc rheometer (ODR). Mechanical properties such as hardness, tensile strength, elogation at break and tear strength were measured, and changes of mechanical properties were also evaluated after immersion in NaCl solution. In addition degree of volume change was measured after immersing the Bio-EPDM foam in NaCl solution and the low-temperature permanent compression set was evaluated at 4℃. To evaluate the low-temperature characteristics of Bio-EPDM/Oyster shell, the glass transition temperature was measured using Differential Scanning Calorimeter (DSC). As a result as the content of the earth coupling agent increased up to 3phr, the crosslinking density and mooney viscosity increased, and the mechanical properties and low-temperature permanent compression set improved, but from 4phr, it was rather decreased. The change in the glass transition temperature was insignificant, and the foam cell appeared to be uniform when the earth coupling agent was applied.

• Restorative Dentistry and Endodontics
• /
• 제14권1호
• /
• pp.41-56
• /
• 1989

The purpose of this study was to examine the effect of temperature dependence of the behavior on the physical properties of posterior composite resins. Three light cure posterior composite resins (Heliomolar, Litefil-P, and P-50) and one chemical cure posterior composite resin (Bisfil-II) were used as experimental materials. Composite resin was placed in a cylindrical brass mold (2.5 mm high and 6.5 mm inside diameter) that was rested on a glass plate. Another flat glass was placed on top of the mold, and the plate was tightly clamped together. After the mold had been filled with the light cure composite material, the top surface was cured for 30 seconds with a light source. Chemical cure resin specimens were made in the same manner as above. Three hundreds and twenty composite resin specimens were constructed from the four composite materials. One hundred and sixty specimens of them were placed in a heater at $50^{\circ}C$, $75^{\circ}C$, $100^{\circ}C$, $125^{\circ}C$, $150^{\circ}C$, $175^{\circ}C$ and $200^{\circ}C$ for 5 minutes or 10 minutes respectively before compressive strengths were measured. Another one hundred and sixty specimens were tested for the diametral tensile strengths in the same way as above. They were randomly divided into eight groups according to the mode of heating methods as follows and stored in distilled water at $37^{\circ}C$ for 24 hours. Group $37^{\circ}C$ - specimens were stored at $37^{\circ}C$ in distilled water for 24 hours. Group $50^{\circ}C$ - specimens were heated at $50^{\circ}C$ after curing. Group $75^{\circ}C$ - specimens were heated at $75^{\circ}C$ after curing. Group $100^{\circ}C$ - specimens were heated at $100^{\circ}C$ after curing. Group $125^{\circ}C$ - specimens were heated at $125^{\circ}C$ after curing. Group $150^{\circ}C$ - specimens were heated at $150^{\circ}C$ after curing. Group $175^{\circ}C$ - specimens were heated at $175^{\circ}C$ after curing. Group $200^{\circ}C$ - specimens were heated at $200^{\circ}C$ after curing. Twenty specimens of each of four composite resins were respectively made by insertion of materials into same mold for examining the dimensional changes between before and after heating. The final eighty specimens were stored in distilled water at $37^{\circ}C$ for 24 hours before testing the dimensional changes. Compressive and diametral tensile strengths were measured crosshead speed 1mm/minute and 500Kg in full scale with a mechanical testing machine (DLC 500 Type, Shimadzu Co., Japan). Dimensional changes were determined by measuring the diametral changes of eighty specimens with micrometer (Mitutoyo Co., Japan). Results were as follows: 1. Diametral tensile strengths of specimens in all groups were increased with time heated compared with control group except for that in group $50^{\circ}C$ and the maximum diametral tensile strength was appeared in the specimen of Litefil-P heated for 10 minutes at $100^{\circ}C$. In heliomolar and P-50, it could be seen in the specimen heated for 10 minutes at $150^{\circ}C$, but in Bisfil-II, it could be found in the specimen heated for 5 minutes at $150^{\circ}C$. 2. Compressive strengths of specimens in all groups was tended to be also increased with time heated but that in group $50^{\circ}C$ and the maximum compressive strengths were showed in the same specimens conditioned as the diametral tensile strengths of four composite materials tested. 3. In Heliomolar, Litefil-P, and Bisfil-II, it was decreased in diameters of resin specimens between before heating and increased in diameters of resin specimens after storing in distilled water, but it was not in P-50. 4. There is little difference in diametral tensile strengths, compressive strengths, and dimensional changes followed by heating the resin specimens for 5 minutes and 10 minutes, but there is no statistical significances.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2001년도 추계학술발표대회
• /
• pp.359-362
• /
• 2001

Traditionally, Cordyceps species have been used as a part of herbal medicine in Oriental countries, including Korea a for intemal health, vigorosity and to cure different diseases related to heart, lung etc. In the recent years, research on artificial fruiting of different Cordyceps species including C. militaris has been carried out in the world because of their medicinal value. Variationas well as instability occur during artificial fruiting. Instability observed in the in vitro fruiting of C. militaris is reported in the present study.

• 한국염색가공학회지
• /
• 제5권1호
• /
• pp.1-9
• /
• 1993

The polymethylhydrosiloxane(PMHS) was synthesized by the co-hydrolysis of methyldichlorophydrosilane and ethyl ether, also polydimethylsiloxane(PDMS) was synthesized by the hydrolysis of dimethyl dichlorosilane and ethyl ether. The silk fabrics were treated with PMHS and PDMS in order to improve the water repellency and the wrinkle recovery. Also the effect of PMHS concentration, PDMS concentration and cure temperature on the physical properties of silk fabrics were studied. The maximum water repellency and maximum wrinkle recovery were obtained from the fabrics treated under the conditions 5%-PMHS and PDMS at 16$0^{\circ}C$, and 3%-PMHD and PDMS at 16$0^{\circ}C$, respectively. The tensile strength, the breaking elongation, the reflection and the bending properties of silk fabrics were not degraded severely by the treatment of PMHS or PDMS.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2002년도 춘계 학술대회지
• /
• pp.73-76
• /
• 2002

The foods such as rice, peanuts and plums etc. are recognized as a direct way to keep health and to cure diseases based on the theory of that the medicine and foods are from the same source, not just to maintain life, therefore due to this reason, the dietary treatment is currently gathering strength with patients who are suffering from chronic diseases. Especially, 1 trust that the practical application of functional foods and taking medicine must be highly effective in curing diseases or relieving symptoms. In order to produce the superior functional foods by medicinal herbs, we should to make a greater effort to research the harvest time of material, drying and keeping method, and additionally try to develop the standard of food material and various drugs manufacturing continually.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 춘계학술대회
• /
• pp.453-456
• /
• 1997

In this paper, we present the developement of Biofeedback system. Biofeedback is a method for learned control of physiological response of the body. It can be used to control certain biological response that cause health problems. Over the past 2 decades, biofeedback has received much attention from medicine as a cure-all for a variety of disease. It has been heralded as a technique that can provide normalization of disturbed physiology without the need for drugs or surgery and their attendant negative side effects. Biofeedback system has been implemented by using PIC microprocessor. We have displayed 5-channel value on PC and managed patient information by using Delphi.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.609-611
• /
• 1995

In this study, we experimented the properties of SOG film as sacrificials layers in surface micromachining and made $SiO_2$ films through spin, bake, cure process. When we culled SOG films once, SOG film thickness is 1000 $\sim$ 3000 ${\AA}$. Then we coaled 200-${\AA}$ SOG film on 9000 ${\AA}$-CVD oxide and then we fabricated test structure, cantilever and ring/beam structure. We estimated deformed structure by SEM. As the results, The deformation of the structure layer in the SOG-coated sacrificial layers is small compared with that or the structure layer on CVD oxide or PSG. In the future, we use multi coated SOG films, SOG film become adequate material as sacrificial layer.

• Elastomers and Composites
• /
• 제19권3호
• /
• pp.163-177
• /
• 1984

The effect of curing temperature increase and sulfur amount added were studied with natural and synthetic rubbers. Also, the effects of TMTD, MBTS and mixture of zinc soaps of high molecular fatty acids added to natural rubber were investigated respectively. The experimental results showed that, in the case of the conventional curing ($145^{\circ}C$), natural rubber, compared with synthetic rubber, gave higher values in elongation, tensile strength, cure rate, and lower values in modulus change. But, at high temperature curing ($180^{\circ}C$), natural rubber showed faster reversion rate, and higher heat build-up compared to synthetic rubber, than in the conventional curing. Also, natural rubber produced at high temperature showed severe degradation in hardness and tensile strength before heat-aging as well as in hardness, modulus and tensile strength after heat-aging. Improved reversion effect was obtained with natural rubber either by blending mixture of zinc soaps of high molecular acids or by applying semi-efficient vulcanization system.

• KIEE International Transaction on Systems and Control
• /
• 제2D권2호
• /
• pp.59-64
• /
• 2002

About two thirds of patients admitted to hospitals world-wide suffer from acute abdomen pains of varying degrees of severity. Acute abdomen pain due to appendicitis or pancreatitis usually requires urgent surgical treatment, whereas pain due to heart ischemia or enteroviral infection requires only drug treatment. In general, making an immediate decision about whether or not acute abdomen pain requires urgent surgery is very difficult. This decision becomes even more difficult when the patient is a young child who can't properly describe the abdominal pain. In this case, thermo-visual inspection can alternatively be used to decide whether urgent surgical treatment is necessary to cure the abdominal pain.