• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 추계종합학술대회
• /
• pp.363-366
• /
• 2007

본 논문은 OFDM 시스템에서 주파수 옵셋을 제거하기 위한 회로를 Simulink로 설계하여 성능을 평가하고, FPGA 구현을 위해 System Generator로 설꼐하였다. System generator 모델을 바탕으로 HDL 코드를 생성하고, RTL schematic도 생성하였다. 그리고 Hardware Co-simulation 과정을 통해 Target Device에 로딩하여 성능 검증을 하였으며, 타이밍 해석과 resource량도 확인하였다.

• 동력기계공학회지
• /
• 제17권4호
• /
• pp.31-35
• /
• 2013

The emergency AC power supply system of the nuclear power plant is designed to supply the power to the nuclear power plant at the emergency operating condition. The safety function of the diesel generator at the nuclear power plant is to supply AC electric power to the safety system whenever the preferred AC power supply is unavailable. The reliable operation of onsite standby diesel generator should be ensured by a condition monitoring system designed to maintain, monitor and forecast the reliability level of diesel generator. The purpose of this paper is to improve the existing ultrasonic sensor used for condition diagnosis of engine fuel pump and cylinder head for the accurate diagnosis in actual engine condition of emergency diesel generator(EDG). As a result of this study, we could design and develop much more reliable ultrasonic sensor than existing ones.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.205-207
• /
• 1994

This paper presents an analyzing method of the distortion factor of the output voltage in generator on the basis of the stator coil flux linkage calculation. In the simulation, 2 dimensional finite clement method is used considering the rotor movement. As an application of the proposed method, we calculated the harmonics of air gap flux and the output voltage in the 150KW class synchronous generator.

• Journal of electromagnetic engineering and science
• /
• 제18권1호
• /
• pp.20-28
• /
• 2018

The time synchronization of each sub-unit of a pulsed generator is important to generate an output high-power radio frequency (RF) signal. To obtain the time synchronization between an input RF signal fed by an external source and an electron beam produced by an electric pulse generator, the influence of different charging voltages on a delay and a rise time of the output pulse waveform in the electric pulse generator should be carefully considered. This paper aims to study the timing characteristics of the delay and the rise time as a function of different charging voltages with a peak value of less than -35 kV in the high-voltage pulse generator, including a trigger generator (TG) and a pulse-forming line (PFL). The simulation has been carried out to estimate characteristics in the time domain, in addition to their output high-voltage amplitude. Experimental results compared with those obtained by simulation indicate that the delay of the output pulses of the TG and PFL, which are made by controlling the external triggering signal with respect to different charging voltages, is getting longer as the charging voltage is increasing, and their rise times are inversely proportional to the amplitude of the charging voltage.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1182-1183
• /
• 2008

In this paper, we develop PCS for doubly-fed induction-type wind generator(DFIG). PCS consists of a converter set and a controller. PCS controls the active power of wind generator and the reactive power of wind turbine system according to rotating speed, instantaneous power, grid quality, and order by transmission system operator.

• 한국군사과학기술학회지
• /
• 제19권5호
• /
• pp.590-597
• /
• 2016

We designed the multiple scattering points generation system to simulate an actual situation of target signal for high range resolution radar system. This provides replicating the target signals and controlling the status of target signals for radar system. This is composed transmit antenna and multi target generator. Transmit antenna is waveguide array antenna and multi target generator has signal distribution module and control & power module. Multi target generator is able to provide the high isolation and variable output power. Moreover, in order to monitor all output signals of the multi target generator, the flows of signals are programed in control & power module. The performance is demonstrated using experimented results of high range resolution radar.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 춘계학술대회 논문집
• /
• pp.417-420
• /
• 2007

1997년 교토 기후협약이 체결되었고, 우리나라도 2013 년부터 기후협약 규제가 거의 확실시 되고 있다. 화석 연료의 연소로 대부분의 전력 을 생산하는 발전 산업은 우리나라 CO2 배출량의 25%를 차지하고 있으며, 발전소의 전력 생산에 따른 CO2배출량의 계산은 매우 중요한 일이 되었다. 본 논문은 발전소의 시험data 와 IPCC (Intergovernmental Panel on Climate Change)의 온실가스 추계방법론을 이용하여 시간당 CO2 대기 배출량을 계산하는 방법을 제시한다. 발전출력에 대한 CO2 배출량을 계산하는 한 예를 도시하였다.

• 한국전자통신학회논문지
• /
• 제8권3호
• /
• pp.439-445
• /
• 2013

본 연구는 발전기와 충전기를 통합하여 필요에 따라서 용접기 또는 발전기로 사용할 수 있는 시스템에 관한 것이다. 구체적으로는, 발전기를 제어하는 제어장치와 다기능 용접기를 사용할 수 있도록 하는 선택 스위치로 구성된 하이브리드 용접기로써 그 기능은 발전기 전원을 충전지에 충전이 완료되면, 발전기는 자동 정지하도록 구성하는 부분과 Co2 MMA TIG MIG MAG 용접기를 모제와 용제에 따라서 공급하는 가스를 제어하도록 제안하였다. 이는 한 번에 한 가지 또는 두 가지 정도만을 선택하는 기존 용접기의 성능과 편리성을 개선하기 위해 전압, 고주파, 모터 그리고 가스 밸브를 제어하는 시스템을 구현하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 추계학술대회 논문집
• /
• pp.391-394
• /
• 2008

Global warming and air pollution have increased the amount $CO_2$ in the atmosphere. In order to decrease the amount of $CO_2$, lots of researches are conducted toward using Hydrogen energy. Because of its high efficiency energy level and environmental friendly features, many companies have researched on developing hydrogen engine system and distributed generation system. Especially, the focus of this research provides the operation method of linear generator for hydrogen fuel combustion linear engine. During an ignition, linear generator is operated by motor to create the initial condition of engine combustion. Once the engine combustion is stabilized, the generator supplies electric power to grid. In order to stabilize the engine, linear generator is required to control mover frequency, direction, and force; Hence the PCS(Power Conversion System) place three H-bridge type inverter stacks in parallel to control phase current independently. As well, by using Back-to-Back method, it can receive electric power from both end.

• 동력기계공학회지
• /
• 제19권5호
• /
• pp.67-72
• /
• 2015

The reliable operation of onsite emergency diesel generator(EDG) should be ensured by a conditioning monitoring system designed to maintain, monitor and forecast the reliability level of diesel generator. The purpose of this paper is to develop condition diagnosis algorithm(logic) and analysis program of engine for the accurate diagnosis in actual condition of emergency diesel generator engine. As a result of this study, we confirmed that developed engine condition diagnosis algorithm and analysis program could be efficiently applied for actual EDG engine in nuclear power plant.