• 천문학회보
• /
• 제43권2호
• /
• pp.45.2-45.2
• /
• 2018

Twisted magnetic flux tubes (also called magnetic flux ropes) are believed to play a crucial role in solar eruptive phenomena. The evolution of a single flux rope with or without the influence of an overlying field of a simple geometry has been extensively studied and its physics is rather well understood. Observations show that interacting flux tubes are often involved in solar eruptions. It was Lau and Finn (1996) who intensively studied the interaction between two flux ropes, whose footpoints are anchored in two parallel planes. In this too simplified setting, the curvature of the flux rope axial fields is totally ignored. In our study, the footpoints of flux ropes are placed in a single plane containing a polarity inversion line as in the real solar active region. Our simulation study is performed for four cases: (1) co-axial field and co-axial current (co-helicity), (2) counter-axial field and co-axial current (counter-helicity), (3) co-axial field and counter-axial current (counter-helicity), and (4) counter-axial field and counter-axial current (co-helicity). Except case 3, each case is found to be related with certain eruptive features.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 방전 플라즈마 유기절연재료 초전도 자성체연구회
• /
• pp.30-33
• /
• 2004

A surge counter is installed under surge arrester, which is protecting the power system apparatuses against abnormal voltage and surges originated in power system line. A surge counter is the device of knowing the times of surge flowed in. There are two methods to get the electric power for mechanical movement and detect the surge. One is using ZnO varistor resister and the other is using the current transformer. In this paper, the characteristics of these methods are presented with using the test and evaluation of them. The process of evaluating the characteristics is essential to develop the domestic surge counter.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.1134-1137
• /
• 2004

The main function of surge counter is knowing the times of surge flowed in, which is installed under surge arrester. Two methods are presented in this paper to get the electric power for mechanical movement and detect the surge with surge counter. One is using ZnO varistor resister and the other is using the current transformer.

• Korean Chemical Engineering Research
• /
• 제48권5호
• /
• pp.598-602
• /
• 2010

본 논문에서는 다량의 수소를 포함한 다성분계 원료가스로부터 수소를 분리해 내는 분리막 시스템에 대하여 CFD 모델링과 모사를 수행하였다. 분리막 시스템은 환형 실린더 타입으로 원료가스의 유입을 위한 외부 lumen side와 sweeping gas가 유입되는 내부 permeation side로 구성된다. Lumen side의 운전온도와 압력은 $374^{\circ}C$, 7 기압 permeation side의 sweeping gas의 도입 온도와 압력은 $374^{\circ}C$, 3기압이며, 이러한 조건에서 운전이 가능한 Pd 분리막을 사용하였다. Sweeping gas의 흐름 방향에 따른 향류 및 병류 흐름에 대하여 각각 CFD 모사를 수행하였으며 수소 몰분율, 수소분압, 수소 플럭스 등에 대하여 결과를 비교하였다. 또한 lumen side의 원료가스 도입유속을 변화시켜 모사를 수행하고, 이에 따른 막분리 시스템의 효율을 비교하고 이에 대하여 고찰하였다.

• Journal of Electrochemical Science and Technology
• /
• 제1권2호
• /
• pp.75-80
• /
• 2010

We report Co-tetramethoxyphenylporphyrin on carbon particles (Co-TMPP/C) as a non-Pt catalyst for tri-iodide reduction in dye-sensitized solar cells (DSSCs). The presence of well-dispersed carbon and cobalt source in the catalyst surface is confirmed by transmission electron microscopy, scanning electron microscopy, and energy dispersive X-ray analysis. In the C 1s, Co 2p, and N 1s peaks measured by X-ray photoelectron spectroscopy, the C-N, Co-$N_4$, and N-C are assigned to the component at 285.7, 781.8, and 401 eV, respectively. Especially, the Co-TMPP/C shows improved current density, diffusion coefficient, and charge-transfer resistance in the ${I_3}^-/I^-$ redox reaction compared to conventional catalysts. Furthermore, in the DSSCs performance, the Co-TMPP/C shows increased short circuit current density, higher open circuit voltage, and improved cell efficieny in comparison with Pt/C.

• 설비공학논문집
• /
• 제13권5호
• /
• pp.422-430
• /
• 2001

In the present study, an evaporative generation process of ammonia-water solution film on the vertical plate was analysed. For the utilization of waste heat, hot water of low temperature was used as the heat source. The continuity, momentum, energy and diffusion equations for the solution film and vapor mixture were formulated in integral forms and solved numerically. Counter-current solution-vapor flow resulted in the refrigerant vapor of the higher ammonia concentration than that of co-current flow. Eve the rectification of refrigerant vapor was observed near the inlet of solution film in counter-current flow. For the optimum operation of generator using hot water, numerical experiments, based on the heat exchange and generation efficiencies. revealed the inter-relationships among the Reynolds number of the solution film and hot water, and the length of generator. Enhancement of heat and mass transport in the solution film was found to be very effective for the improvement of generation performance, especially at high solution flow rate.

• 환경위생공학
• /
• 제15권3호
• /
• pp.94-100
• /
• 2000

This study was carried out to interpret hydraulic behavior and CO2 gas desorption in counter-current packing tower which packed 50mm plastic Hiflow-ring. The results are as follow : To compare with conventional packing, 50mm Hiflow-ring could save energy because of low pressure drop under high load. As relative error between calculated value and investigated value was less than 6% in the loading point and flooding point we found that we are predict results mathematically which occur in packing tower. The unique magnitude of packing which was used are as follows. $C_L=2.1{\times}10^{-4}$, n=0.787 so we can predict efficiency which occur

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1882-1884
• /
• 1996

This paper deals with the lightning surge counter. In order to install the effective surge protective devices, it is important to find the parameters of incident surges. For the purpose of observing the occurrence frequency as a parameter of the amplitude of surge, two type surge counters were designed and fabricated. One is operated by surge currents, and the other is operated by surge voltages. The former consists of current sensor, metal oxide varister (MOV), rectifier, capacitor and electromagnetic counter. The latter consists of rectifier, voltage divider, comparator, photo coupler and counter circuit, and is useful for detecting the surge voltages.

• Korean Chemical Engineering Research
• /
• 제47권4호
• /
• pp.446-452
• /
• 2009

최근 청정대체에너지로 각광을 받고 있는 dimethyl ether(DME)를 천연가스를 이용하여 직접 생산하는 1단계법의 고정층 촉매 반응기를 모사하였다. 1단계법의 고정층 반응기의 경우, 발열 반응인 메탄올 합성반응과 메탄올 탈수 반응이 동시에 일어나기 때문에 촉매의 비활성화를 일으킬 수 있는 hot spot의 발생을 막는 것이 가장 중요하다. 따라서 향후 상용공정에 적용 가능한 향류 냉각방식(count-current cooling system)과 포화액체 풀비등 방식(pool boiling system)을 적용하여 반응기 거동을 모사하고 이를 비교하였다. CO 전환율과 DME 생산성 면에서 향류 냉각방식이 더 효과적이었다. 하지만 포화비등액체 풀비등 방식이 더 작은 온도 범위에서 운전되어 hot spot(국소 고온점)의 가능성을 낮추고 더 안정적인 반응기 운전범위를 확보할 수 있었다.

• 유기물자원화
• /
• 제28권4호
• /
• pp.43-52
• /
• 2020

멤브레인을 이용한 기체 분리 기술이 발전함에 따라 분리 과정을 설명하기 위해 다양한 수학적 모델을 개발하고 적용해 왔다. 본 연구에서는 셀룰로오스 아세테이트(CA) 중공사 분리막을 제조하여 실험에 사용하였다. 메탄, 질소, 산소 및 이산화탄소 순수가스를 이용하여 투과도를 측정하고, 향류 흐름 모델(Counter-current model)을 적용하여 실험데이터와 비교/해석하였다. CA 막에 대한 이산화탄소와 메탄의 투과도는 각각 25.82 GPU와 0.65 GPU로 나타났다. CO2/CH4 선택도는 39.7이었다. 순수가스 테스트 후 세 가지 모의 혼합가스에 대한 분리 테스트를 수행하였으며, 다양한 stage-cut 조건에서 투과된 가스의 농도를 측정하였다. 실험으로 얻은 데이터를 향류 흐름 모델로 비교한 결과 상당히 일치하는 것으로 나타났으며, CA 멤브레인 모듈을 사용한 바이오가스 분리를 수학적 모델로 구현할 수 있었다. 또한 유한차분법(FDM)을 적용하여 멤브레인에서 바이오가스의 분리 거동을 유추할 수 있었다. 향후 향류 흐름 모델은 바이오가스 분리 공정을 위한 모델로서 활용 가능할 것으로 기대된다.