• Earthquakes and Structures
• /
• 제17권3호
• /
• pp.307-315
• /
• 2019

Building prediction and control theory have been drawing the attention of many scientists over the past few years because design and control efficiency consumes the most financial and energy. In the literature, many methods have been proposed to achieve this goal by trying different control theorems, but all of these methods face some problems in correctly solving the problem. The Evolutionary Bat (EB) Algorithm is one of the recently introduced optimization methods and providing researchers to solve different types of optimization problems. This paper applies EB to the optimization of building control design. The optimized parameter is the input to the fuzzy controller, which gives the status response as an output, which in turn changes the state of the associated actuator. The novel control criterion for guarantee of the stability of the system is also derived for the demonstration in the analysis. This systematic and simplified controller design approach is the contribution for solving complex dynamic engineering system subjected to external disturbances. The experimental results show that the method achieves effective results in the design of closed-loop system. Therefore, by establishing the stability of the closed-loop system, the behavior of the closed-loop building system can be precisely predicted and stabilized.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 B
• /
• pp.512-514
• /
• 1999

The damping ratio $\zeta$ of a continuous 2nd order response which passes all the points of the discrete response of a 2nd order discrete system(envelope curve) is a function of only the location of the closed-loop pole and ie not at all related to the location of the zero. And the peak overshoot of the envelope curve is uniquely specified by the damping ratio $\zeta$, which is a function of solely the closed-loop pole location, and the angle $\alpha$ which is determined by the relative location of the zero with respect to the closed-loop complex pole. Therefore, if the zero slides on the real axis with the closed-loop complex poles being fixed, then the angle $\alpha$ changes however the damping ratio $\zeta$ does not. Accordingly, when the closed-loop system poles are fixed, the peak overshoot is function of $\alpha$ or the system zero. In this thesis the effects of the relative location of the zero on the system performance of a second order discrete system is studied.

• 제어로봇시스템학회논문지
• /
• 제10권10호
• /
• pp.956-960
• /
• 2004

The Vehicle Dynamic Simulator(VDS) is a key equipment of the performance verification of attitude control subsystem and it simulates the real dynamic environment that spacecraft undergoes during mission operation. All the software models and hardware interfaces necessary for the closed-loop simulation of the spacecraft dynamics are implemented. Using VDS, KOMPAT-2 attitude control logic functions and performance was verified. In this paper, the hardware and software configurations of KOMPSAT-2 VDS was described briefly and the information flow and exchanges between software models and actual hardwares during close loop simulation was described in the systematic point of view.

• International Journal of Control, Automation, and Systems
• /
• 제5권2호
• /
• pp.111-116
• /
• 2007

The design problem of partial pole assignment (PPA) in two classes of frequency-domain MIMO models by constant gain feedback is investigated in this paper. Its aim is to design a constant gain feedback which changes only a subset of the open-loop eigenvalues, while the rest of them are kept unchanged in the closed-loop system. A near general parametric expression for the feedback gain matrix in term of a set of design parameter vectors and the set of the closed-loop poles, and a simple parametric approach for solving the proposed problem are presented. The set of poles do not need to be previously prescribed, and can be set undetermined and treated together with the set of parametric vectors as degrees of design freedom provided by the approach. An illustrative example shows that the proposed parametric method is simple and effective.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.15-17
• /
• 1996

In this paper, a modified microstep drive of PM step motor is presented. The open-loop drive of a step motor is attractive and widely accepted in applications of speed and position controls. However, the performance of the step motor is limited under the open-loop drive. The closed-loop control is advantages over the open-loop control not only in that step failure never occurs but that the motion is much quicker and smoother. However, a high resolution sensor is needed for detecting position and speed. The modified microstep drive is constructed as a microstep drive with speed feedback. The advantages of the proposed method is that the controller can be designed by a low resolution sensor and is simpler than other closed-loop controller. A concept of vector control is used for verifying the proposed scheme. Simulations show the performance of the proposed method and a comparison with a classic drive method.

• 전력전자학회논문지
• /
• 제16권1호
• /
• pp.38-43
• /
• 2011

본 논문에서는 슬라이딩 모드 관측기를 이용하여 IPMSM(Interior Permanent Magnet Synchronous Motor)의 센서리스 제어의 기동특성에 관한 연구를 수행하였다. 역기전력을 추정하는 센서리스 제어 방식은 초기 구동 시 회전자의 위치를 알 수가 없으므로 Open-Loop알고리즘을 이용하여 강제로 모터를 구동시킨다. 이 방법은 Open-Loop에서 Closed-Loop로 제어되는 시점에 부하의 상태에 따라 기동 특성이 변하는 문제점이 발생 할 수 있다. 본 논문에서는 부하에 따라 기동 특성에서 야기되는 문제점을 검토하고 그 해결책을 제시한다. 제시된 방법은 6극 600W급 IPMSM을 이용하여 시뮬레이션과 실험을 통해 검증한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1706-1710
• /
• 2004

This paper presents a feedback-controlled, MEMS-fabricated microaccelerometer (${\mu}$XL). The ${\mu}$XL has received much commercial attraction, but its performance is generally limited. To improve the open-loop performance, a feedback controller is designed and experimentally evaluated. The feedback controller is applied to the x/y-axis ${\mu}$XL fabricated by sacrificial bulk micromachining (SBM) process. Even though the resolution of the closed-loop system is slightly worse than open-loop system, the bandwidth, linearity, and bias stability are significantly improved. The noise equivalent resolution of open-loop system is 0.615 mg and that of closed-loop system is 0.864 mg. The bandwidths of open-loop and closed-loop system are over 100 Hz. The input range, non-linearity and bias stability are improved from ${\pm}$10 g to ${\pm}$18 g, from 11.1 %FSO to 0.86 %FSO, and from 0.221 mg to 0.128 mg by feedback control, respectively

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.537-539
• /
• 1999

When dealing with a controller design in the two parameter configuration, there are some situations when neither a known pseudo inverse technique nor the inverse method can be applicable. In this case, we propose two methods of designing a controller by the gradient algorithm and the new pseudo inverse method such that the designed closed loop polynomial may be equal to or nearly equal to the desired closed loop polynomial. We compare the proposed methods with the known methods. We use the Manabe standard form as a desired closed loop characteristic polynomial.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.544-549
• /
• 1990

In industrial multivariable plants, it is often the case that the plant outputs are detected not simultaneously but serially. In this paper, the problem of estimating the state vector of the plant based on the data obtained from such a detecting scheme is considered, and a special type of observer (referred to as a "serial-sampling' type observer) which renews its internal states whenever a new data is obtained is proposed. It is proved that such an observer can be constructed for almost every sampling period if the plant is observable as a continuous-time multivariable system, and that the poles of the closed-loop system using the serial-sampling type observer consist of the poles of the observer and those of the state feedback system. The behaviors of the observer and the closed-loop system are studied by simulation. The results of simulation indicate that a serial-sampling type observer can estimate the state of the plant more accurately than the ordinary type observers and improve the closed-loop performance.ance.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.10-10
• /
• 2000

Eigenstructure assignment is a typical method with the capability of the consideration of the specifications in time-domain in designing a 1]near control system. In general eigenstructure assignment such that all the desired eigenvalues are exactly assigned to the closed-loop system, the assignment of the eigenvectors is very restrictive. However if the arbitrary point in a certain area as an eigenvalue is allowed to be assigned t the closed-loop system, the assignment of the eigenvector corresponding to this eigenvalue can be much less restrictive. In this paper, the flexible eigenstructure assignment that can assign more closely the desired eigenvector to the closed-loop system by using an optimization technique is proposed.