• Journal of Chest Surgery
• /
• 제21권2호
• /
• pp.379-382
• /
• 1988

We have experienced a case of right side chylothorax following closed chest injury. A 35-year-old man in his car was accidentally collided against obstacles on September 19, 1986 resulting in a contusion on right anterior chest wall. The only complaint noted on admission was right chest pain. Chest X-ray showed near total radiopaque density of right thorax. Conservative treatment of closed tube thoracostomy at right pleural cavity through midaxillary 7th intercostal space had been continued for 25 days without improvement. Chyle outflow through the chest tube was averaging 1,700cc per day. Oversewing of the thoracic duct and pleura by silk and pledgetted prolene sutures were done. There was no complication and recurrence till postoperative 20 days. Chylothorax following closed chest injury was never reported in this country, and will be a interesting clinical case report.

• Journal of Chest Surgery
• /
• 제12권1호
• /
• pp.61-66
• /
• 1979

This is a report of a case of tuberculous esophageal perforation, which was surgically treated.. The patient was 32-year-old Korean female patient, who complained swallowing difficulty for` 4 weeks duration. Esophagogram was shown irregular filling defects in the upper one third of esophagus, about 4 cm in length. It was noticed that a small amount of contrast media was leaked out from the involved area of esophagus into the right mediastinum. It was highly suggested that abscess formation was due to perforation of esophageal cancer. Esophagoscopy revealed no definitive evidence of perforation of esophagus, but punch biopsy specimen of esophageal mucosa was shown acute and chronic inflammatory changes. Operation was performed under impression of esophageal cancer. In the right-sided upper mediastinum, a walnut-sized abscess cavity which was connected with esophagus through a fistulous tract was noted. A portion of cavity submitted for frozen section was shown tuberculous inflammation. The abscess cavity, fistula tract, and involved esophageal wall were removed. The perforated esophagus was closed layer by layer. The tuberculous changes were confirmed by histopathologic examination postoperatively. The postoperative course was uneventful.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1601-1604
• /
• 2003

This paper describes a split operation for generation of core and cavity plates of an injection mold for a pseudo-solid model of a plastic part. Here, a pseudo-solid model means a sheet model that looks like a solid model. but whose boundary is not closed. When a solid model created in a different CAD system is imported through standard data exchange format, a pseudo-solid model is created in most cases as tolerance or some other problems make sewing operation failed. As most existing mold design system based on solid modeling kernels require a complete part solid model, mold designers have to do time-consuming healing operations to convert a pseudo-solid to solid. The essential capability of mold design system is the split operation for generation of core and cavity plates. Thus. we developed a split operation for pseudo-solid part model to eliminate or reduce healing preprocessing for mold design.

• 한국가시화정보학회지
• /
• 제13권1호
• /
• pp.26-29
• /
• 2015

A laboratory experiment was carried out to observe and visualize ventilated supercavitation phenomena around a moving underwater body which is attached to a newly designed high-speed (Max. 20 m/s) carriage system in a wave tank. Compared to the existing many other experimental studies using cavitation tunnels, where the body is at rest and the fluid is in motion in a bounded or closed environment, the present experimental study deals with super-cavity formation in unbounded or free-surface bounded environments, where the body is in motion and the fluid is at rest. Main attention is paid to the effective visualization of the steady-state cavity formations around a moving body and, those cavity formations are reported pictorially according to the body speed, ventilated air-pressure, and with or without a cavitator.

• Geomechanics and Engineering
• /
• 제4권1호
• /
• pp.19-37
• /
• 2012

This paper presents the results of analytical and numerical analyses of the effects of performing a pressuremeter test or driving a pile in clay. The geometry of the problem has been simplified by the assumptions of plane strain and axial symmetry. Pressuremeter testing or installation of driven piles has been modelled as an undrained expansion of a cylindrical cavity. Stresses, pore water pressures, and deformations are found by assuming that the clay behaves like normally consolidated modified Cam clay. Closed-form solutions are obtained which allow the determination of the principal effective stresses and the strains around the cavity. The analysis which indicates that the intermediate principal stress at critical state is not equal to the mean of the other two principal stresses, except when the clay is initially isotropically consolidated, also permits finding the limit expansion and excess pore water pressures by means of the Almansi finite strain approach. Results are compared with published data which were determined using finite element and finite difference methods.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권2호
• /
• pp.176-183
• /
• 1999

This paper is aimed to investigate behaviour of vortex in 2-D step cavity with high Reynolds numbers$(3.2{\times}10^{3},\;10^{4},\;3{\times}10^{4},\;5{\times}10^{4}\;and\;7{\times}10^{4})$. The SOLA algorithm which is MAC type was adopted to solution method computing the flow field on irregular grid. In case of $Re=7{\times}10^{4}$ flow behavior is steady bu periodic unsteady sinusoidal fluctuation of local velocity and kinetic energy is found for $Re=10^{4}$ Continuous movements of small eddies in the secondary flow regions are discov-ered for $3{\times}10^{4}$ Generation of eddies and their active migrating behavior are detected over $Re=5{\times}10^{4}$ resulting in complete unsteady and non-linear flow characteristics Furthermore a typhoon-like vortex(TLV) appears intermittently and rotates along the separation regions and boundary layers.

• Korean Journal of Otorhinolaryngology-Head and Neck Surgery
• /
• 제61권11호
• /
• pp.624-629
• /
• 2018

Low-grade fibromyxoid sarcoma (LGFMS), a soft tissue tumor that has high recurrence and metastasizing potential, rarely occurs in the head and neck region. Therefore, the treatment for LGFMS in the facial area is challenging in terms of cosmetic and functional maintenance. The authors report a case of LGFMS in the posterior nasal cavity. It was completely removed in parallel with the nasal endoscopic and oral approach, but the lower margin was closed by preserving the soft palate. The patient is well without any recurrence or metastasis after 5 years of follow-up.

• 대한기계학회논문집
• /
• 제16권4호
• /
• pp.803-810
• /
• 1992

본 연구에서는 서산등과 Nishiyama등이 제시한 특이점 분포법에 의한 기초식 을 비선형으로 해석하기 위하여 익과 유한한 길이의 캐비티의 자유유선에 용출, 와, 이중용출 등의 특이점을 분포시켜서 수퍼캐비테이션을 발생시키는 익열의 유동장을 지 배하는 비선형의 적분방정식을 복소포텐셜로 나타내고 경계 요소법을 이용하여 수치계 산함으로써 수퍼비테이션익열의 유동에서의 수력특성을 구하는 데 있다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제21권4호
• /
• pp.430-436
• /
• 1997

Time-dependent Flow characteristics of a two-dimensional lid-driven square cavity flow of six high Reynolds numbers, $10^4 2{\times}lO^4., 3{\times}l0^4, 5{\times}lO^4, 7.5{\times}lO^4$ and $10^5$ were investigated. A convection conservative difference scheme based upon SOLA to maintain the nearly 2nd-order spatial accuracy was adopted on irregular grid formation. Irregular grid number is $80{\times}80$ and its minimum size is about 1/400 of the cavity height(H) and its maximum is about 1/53 H. The result shows that at Re= $10^4$, periodic migration of small eddies appearing in corner separation region and its temporal sinusoidal fluctuation are represented. And another critical Reynolds number which shows the commencement of flow randomness emerging from the periodic fluctuation is assumed to be around Re= $1.5{\times}10$. At five higher Reynolds numbers ($2{\times}lO^4., 3{\times}l0^4, 5{\times}lO^4, 7.5{\times}lO^4$ and $10^5$), an organizing structure of four consecutive vortices similar to a Moffat vortex at two lower corners is revealed from time-mean flow patterns.

• Korean Journal of Otorhinolaryngology-Head and Neck Surgery
• /
• 제61권11호
• /
• pp.605-610
• /
• 2018

Background and Objectives The purpose of the present study was to evaluate the usefulness of a posterior-based buccinator myomucosal flap (the Bozola flap) for the reconstruction of oral cavity defects after tongue cancer resection. Subjects and Method Fifteen patients who underwent from 2014 to 2016 reconstruction of the oral cavity with a Bozola flap after surgical management of tongue cancer were enrolled in the study. Patient characteristics, surgical outcomes, and complications associated with the Bozola flap were evaluated. Results The flap was successfully harvested and transferred in all patients. The mean flap harvesting time was 25.3 min. The donor site was closed primarily in 14 patients, and a buccal fat pad flap was used in one patient. Although partial necrosis of the flap occurred in two patients, no other major complications were noted. Conclusion The results of this study demonstrate that the Bozola flap is a good option for reconstruction of moderate sized oral cavity defects in tongue cancer patients.