• 제목/요약/키워드: Close range

검색결과 1,168건 처리시간 0.029초

근접사진측량과 Total Least Squares를 활용한 VLBI 안테나 형상 변형 모니터링 방안 연구 (Shape Deformation Monitoring for VLBI Antenna Using Close-Range Photogrammetry and Total Least Squares)

  • 김혁길;윤홍식
    • 한국측량학회지
    • /
    • 제34권1호
    • /
    • pp.99-107
    • /
    • 2016
  • VLBI 시스템의 정밀측위 정확도 유지를 위하여 안테나 구조물에서 발생하는 형상 변형을 분석할 수 있는 모니터링 연구가 반드시 수행되어야 한다. 특히, VLBI 안테나 주 반사경의 형상 변화로 인하여 퀘이사로부터 전자기파 수신에 대한 안테나 이득이 감소할 것으로 예상됨에 따라, 주 반사경을 대상으로 하는 형상 변형 모니터링에 대한 중요성이 증대되고 있다. 이에 따라, 본 연구에서는 향후 상시적이고 자동화된 구조 변형 모니터링 시스템으로 활용될 수 있는 근접사진측량 방법과 연계한 효율적인 알고리즘 구축을 통해 VLBI 구조물 중 가장 변형 가능성이 높은 주 반사경을 모니터링하기 위한 기반연구를 수행하였다. 이를 위해, VLBI 안테나 주 반사경의 전 방향에 분포된 특징점을 대상으로 토털최소제곱법을 활용하여 총 10개의 fitting line을 추정하고, 비교차 선들 간의 근접점 계산 알고리즘을 활용하여 추정된 fitting line들의 교차점을 계산하였다. 본 연구결과는 향후 시계열 분석을 통해 3축으로 표현된 교차점의 수치변동량을 계산함으로써 변형률뿐만 아니라 변형방향까지 예측할 수 있는 직관적인 근거자료로 활용 가능할 것으로 판단된다.

공선조건에 의한 구조물의 기하학적 변형해석에 관한 연구 (A Study on the Geometric Deformation Measurement of Structures by Collinearity Condition)

  • 강준묵;오원진;이진덕;한승희
    • 한국측량학회지
    • /
    • 제4권2호
    • /
    • pp.77-87
    • /
    • 1986
  • 구조물의 변형측정에 있어서 Strain gauge, Inclinometer, Dial gauge등을 이용한 방법과 측지학적인 방법들은 기구설치의 어려움과 경제적인 면은 물론 정확도면에서도 많은 문제점을 안고있다. 이에 최근 다방면으로 활용이 증대되고 있는 C. R. P(Close-Range Photogrammetry) 기법을 토목구조물의 변형측정에 적용하여 이를 공선조건으로 해석하였다. 피사체로 현수교모형을 제작하였으며 재하변형측정 실험을 실여, Dial gauge, Precision level, 정밀삼각측양을 통한 측정값과 비교하여 그의 타당성을 제시하였다. 또한 실구조물에 적용시 발생하는 제반문제점들을 고려하기위해 Camera 회전인자 $\omega$,$\psi$ 노출점높이 Z$_{L}$, 기선경사각 $\theta$의 변화를 다양하게 실험하여 그의 특성을 고찰하였다. 실험결과 Dial gauge, 정밀 Level, 정밀 삼각측양으로 측정한 변형양과 C. R. P로 측정한 변형양은 10$\mu\textrm{m}$ 이내의 증차로 상호접근하였으며 X와Z 좌표에 대한 표준오차는 수렴각 약 60$^{\circ}$에서 Y좌표는 수렴각 약 90$^{\circ}$에서 가장 작았으며 Z$_{L}$의 변화는 오차에 별다른 영향을 주지않는다. 또한 $\theta$가 증가함에따라 본 실험조건하에서는 Normal Case에서 30$^{\circ}$까지 Convergent Case에서는 15$^{\circ}$까지 양호한 정도를 보였으며 $\psi$$\omega$가 동시에 증가할수록 정도가 급격히 저하되며 특히 Y좌표의 정도에 많은 영향을 미침을 알 수 있었다. 이들 결과로 볼때 C. R. P해석기법은 정도와 경제적인 면에서 각종 구조물의 변형측정에 그 효용이 기대된다.대된다.

  • PDF

A Wide Voltage-Gain Range Asymmetric H-Bridge Bidirectional DC-DC Converter with a Common Ground for Energy Storage Systems

  • Zhang, Yun;Gao, Yongping;Li, Jing;Sumner, Mark
    • Journal of Power Electronics
    • /
    • 제18권2호
    • /
    • pp.343-355
    • /
    • 2018
  • A wide-voltage-conversion range bidirectional DC-DC converter is proposed in this paper. The topology is comprised of one typical LC energy storage component and a special common grounded asymmetric H-bridge with four active power switches/anti-parallel diodes. The narrow output PWM voltage is generated from the voltage difference between two normal (wider) output PWM voltages from the asymmetric H-bridge with duty cycles close to 0.5. The equivalent switching frequency of the output PWM voltage is double the actual switching frequency, and a wide step-down/step-up ratio range is achieved. A 300W prototype has been constructed to validate the feasibility and effectiveness of the proposed bidirectional converter between the variable low voltage side (24V~48V) and the constant high voltage side (200V). The slave active power switches allow ZVS turn-on and turn-off without requiring any extra hardware. The maximum conversion efficiency is 94.7% in the step-down mode and 93.5% in the step-up mode. Therefore, the proposed bidirectional topology with a common ground is suitable for energy storage systems such as renewable power generation systems and electric vehicles with a hybrid energy source.

Nb 첨가 오스테나이트계 내열 스테인리스강의 열기계적 피로 수명 및 변형 거동 (Endurance Life and Deformation Behavior under Thermo-mechanical Fatigue of Nb-added Heat Resistant Austenitic Stainless Steel)

  • 오용준;박중철;양원존
    • 대한금속재료학회지
    • /
    • 제49권7호
    • /
    • pp.541-548
    • /
    • 2011
  • Thermomechanical fatigue (TMF) behavior of heat resistant austenitic stainless steel was evaluated in the temperature range from 100$^{\circ}C$ to peak temperatures of 600 to 800$^{\circ}C$; The fatigue lives under TMF conditions were plotted against the plastic strain range and the dissipated energy per cycle. In the expression of the inelastic strain range versus fatigue life, the TMF data obtained at different temperature ranges were located close to a single line with a small deviation; however, when the dissipated energy per cycle, calculated from the area of the stress-strain hysteresis loops at the half of the fatigue life, was plotted against the fatigue life, the data showed greater scattering than the TMF life against the inelastic strain range. A noticeable stress relaxation in the stress-strain hysteresis curve took place at the peak temperatures higher than 700$^{\circ}C$, but all specimens in this study exhibited cyclic hardening behavior with TMF cycles. Recrystallization occurred during the TMF cycle concurrent with the formation of fine subgrains in the recrystallized region, which is considered to cause the cyclic hardening of the steel.

모방발화의 기본주파수 연구 (A Study of Fundamental Frequency about Voice Imitation)

  • 박미영;신지영;강선미
    • 대한음성학회:학술대회논문집
    • /
    • 대한음성학회 2004년도 춘계 학술대회 발표논문집
    • /
    • pp.199-204
    • /
    • 2004
  • The purpose of this paper is to find prosodic characteristics in voice imitation. Speakers change various phonetic features in voice imitation. Speakers change their pitch ranges in the most cases. Especially, the pitch range is important for word conditions. And, as imitators change the voice, the average value of f0 is close to high frequence than low frequence or middle level.

  • PDF

2연식 상자형 암거의 최적 설계 (Optimum Design of Two Continuous Box Culvert)

  • 박재규;김종옥
    • 한국농공학회:학술대회논문집
    • /
    • 한국농공학회 2001년도 학술발표회 발표논문집
    • /
    • pp.136-141
    • /
    • 2001
  • In this study, computer program for the optimum design of two continuous box culvert was developed. It was shown that even though the starting points and optimization method are different, the objective function and optimum design variables converge to a value within a close range respectively, and consequently the optimum design program developed in this study is reliable and robust. MMFD is the most efficient one from the viewpoint of convergency and computing time.

  • PDF

Determination of Viscosity Average Molecular Weight from Number and Weight Average Molecular Weights

  • Park, Eun-Soo;Yoon, Jin-San
    • Macromolecular Research
    • /
    • 제8권5호
    • /
    • pp.243-245
    • /
    • 2000
  • can be determined from the number and weight average molecular weight. When the value of the exponent, a, appearing in the relation between the intrinsic viscosity and the viscosity average molecular weight, is in the range from 0.6 to 0.8, as is the case for the most polymers, the viscosity average molecular weight is much more close to the weight average molecular weight than to the number average molecular weight.

  • PDF

Latest developments in phosphorescent OLEDs

  • Weaver, M.S.;Adamovich, V.A.;Kwong, R.C.;Hack, M.;Brown, J.J.
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
    • /
    • pp.1129-1132
    • /
    • 2005
  • We report state-of-the-art phosphorescent organic light emitting diode lifetime and efficiency performances for a range of emission colors. Lifetimes in excess of 100,000hrs have been demonstrated at display luminance levels for saturated red emission. External quantum efficiencies close to the theoretical maximum (e.g. 23% without enhanced optical output coupling) are also demonstrated for devices with lifetimes in excess of 15,000hrs at a display level luminance for both orange red and green.

  • PDF

속산 시뮬레이션에 의한 ATM 텔레트래픽 연구

  • 국광호;이창호;오창환;강성렬
    • 한국경영과학회:학술대회논문집
    • /
    • 대한산업공학회/한국경영과학회 1996년도 춘계공동학술대회논문집; 공군사관학교, 청주; 26-27 Apr. 1996
    • /
    • pp.553-556
    • /
    • 1996
  • The cell loss probability recommended in the B-ISDN is in the range of 10$^{-8}$ ~ 10$^{-12}$ . When a simulation technique is used to analyze the performance of the ATM switching system, an enormous amount of computer time is required. In this study, we derive an importance sampling simulation technique that can be used to evaluate the loss probability obtained by the importance sampling simulation is very close to that obtained by the ordinary simulation and the computer time can be reduced drastically by the importance sampling simulation.

  • PDF

농업용 수로터널의 최적 설계(구조 및 재료 \circled1) (Optimum Design of Agricultural Aqueduct Tunnel)

  • 김종옥
    • 한국농공학회:학술대회논문집
    • /
    • 한국농공학회 2000년도 학술발표회 발표논문집
    • /
    • pp.206-212
    • /
    • 2000
  • In this study, computer program for the optimum design of agricultural aqueduct tunnel was developed. It was shown that even though the starting points and optimization method are different, the objective function and optimum design variables converge to a value within a close range respectively, and consequently the optimum design program developed in this study is reliable and robust. 3D-design drawing can be drawn using automation design computer program developed in this study

  • PDF