• 대한치과교정학회지
• /
• 제21권3호
• /
• pp.685-699
• /
• 1991

The purpose of this report is to review vertical dysplasia such as openbite or deep bite in skeletal Class III malocclusion and their treatment modality and to present two cases treated with MEAW. The results obtained were as follows A. Open bite case 1. The treatment time was 3 year 8 months. 2. Upper and lower incisors showed extrusion and especially lower anterior alveolar process showed remodelling. 3. The mesially inclined upper and lower molars were uprighted and especially lower first molars showed extrusion that means remodelling of alveolar bone. 4. Normal overbite and overjet were established. 5. Mandible showed slight clockwise rotation. 6. Maxilla showed slight downward bending of ANS part. 7. Upper lip showed downward drop and lower lip showed retraction and touch between upper and lower lip was established. 8. Tongue posture of post-treatment was more raised than pretreatment. B. Deep bite case 1. The treatment time was 1 year 8 months. 2. Upper incisors showed intrusion and labioversion and lower incisors showed slight intrusion and linguoversion. 3. The lower molars showed distal uprighting and intrusion and upper molars showed mesial movement and extrusion. 4. Normal overbite and overjet were established. 5. Maxilla did not show downward movement. 6. Mandible showed slight clockwise rotation. 7. Lower lip showed retraction and downward drop and upper lip showed downward drop.

• 한국공작기계학회논문집
• /
• 제17권4호
• /
• pp.22-28
• /
• 2008

Friction stir welding(FSW) is an relatively new solid state joining process. A1606l-T6 aluminium alloy has gathered wide acceptance in the fabrication of light weight structures requiring a high strength to weight ratio and good corrosion resistance. This friction stir process(FSP) uses a non-consumable tool to generate frictional heat in the abutting surfaces. The welding parameters such as tool rotational speed, welding speed, etc., and tool pin profile playa major role in deciding FSP zone formation in A16061-T6 aluminium alloy. Tow different tool pin profiles have been used to fabricate the joints. The formation of friction stir processed zone has been analysed macroscopically. Tensile properties of the joints have been evaluated and correlated with the friction stir processed zone formation.

• 한국임상보건과학회지
• /
• 제10권2호
• /
• pp.1587-1593
• /
• 2022

Purpose. This study was to investigate the degree of refractive error that occurs depending on the measurement location of the subject when performing a refraction test using the automatic refractor. Methods. When performing the auto-refraction test, measurements were taken while increasing the distance between the forehead and the forehead rest, and the measurements were made by tilting the head clockwise and counterclockwise. Results. During the auto-refraction test, significant refractive error occurred when the forehead was not attached to the forehead support or the subject's head was turned clockwise or counterclockwise. Conclusions. When performing a refraction test using an automatic refractor, the examiner will have to pay attention to whether the subject's forehead is in close contact with the forehead rest, and whether the head is tilted.

• 대한치과교정학회지
• /
• 제24권4호
• /
• pp.851-860
• /
• 1994

Before 1970, mandibular overgrowth was known as main cause of skeletal Class III malocclusion in growing children ; however, recent study reports that many skeletal Class III malocclusion patients also show maxillary deficiency. Since 1972, when Delaire re-accommodated Protraction Head Gear (P.H.G.), many researchers have reported that skeletal Class III discrepancies could be corrected through use of P.H.G., which induces anterior movement of maxilla and change in mandibular growth pattern into infero-posterior direction ; nevertheless, it is very difficult to predict resultant changes of orofacial region. The purpose of this study was to find out what treatment effect P.H.G. has on different study samples. Author divided 51 skeletal Class III malocclusion patients with maxillary deficiency who were treated with P.H.G. into different study groups depending on sex, treatment beginning age, intraoral appliance, and facial growth pattern. By doing so, following results were obtained. 1. Treatment beginning age and Sex Four age groups (5.8 to 8 year-old, 8 to 10 year-old, 10 to 12 year-old, 12 to 14 year-old) were compared, and no significant difference was observed. (p<0.05) There was no significant difference between the sex groups, either. (p<0.05). 2. Intraoral appliance Treatment effects of study groups that used R.P.E.(mean age of 10.2) and Labio-Lingual appliance(mean age of 8.9) were compared. There was no significant difference depending on the type of intraoral appliance that was used. (p<0.05) 3. Facial growth pattern 1) Amounts of SNB and ANB corrections were smaller in clockwise growth pattern group than those in normal or counterclockwise growth pattern group. (p<0.05) 2) Amounts of increase in Wits appraisal and mandibular plane angle were greater in counterclockwise growth pattern group than those in normal or clockwise growth pattern group. (p<0.05) 3)Amounts of increase in articular angle were greater in counter lockwise growth pattern group than those in clockwise growth pattern group. (p<0.05)

• 대한기계학회논문집B
• /
• 제23권10호
• /
• pp.1265-1273
• /
• 1999

PIV(Particle Image Velocimetry) velocity field measurements inside the snout of a1/10 scale model of the Zn plating process were carried out at the strip speed $V_s=1.5m/s$. Aluminum powder particles ($1{\mu}m$) and atomized olive oil ($3{\mu}m$) were used as seeding particles to simulate the molten Zinc flow and deoxidization gas flow, respectively. A pulsed Nd:Yag laser and a $2K{\times}2K$ high-resolution CCD camera were synchronized for the PIV velocity field measurement. From flow visualization study, it is found that the liquid flow in the Zn pot is dominantly governed by the uprising flow caused by the rotating sink roll, with its effect on the steel strip inside the snout largely diminished by installing of the snout. The deoxidization gas flow in front of the strip inside the snout can be characterized by a large-scale vortex rotating clockwise direction formed by the moving strip. In the rear side of the strip, a counter-clockwise vortex is formed and some of the flow entrained by the moving strip impinges on the free surface of molten zinc. The liquid flow in front of the strip is governed by the flow entering the snout, caused by the spinning sink roll. Just below the free surface a counter-clockwise vortex is formed near the snout wall. The moving strip affects dominantly the flow behind the strip inside the snout, and large amount of the liquid flow follows the moving strip toward the sink roll. The thickness of the flow following the strip is very thin in the front side due to the uprising flow, however thick boundary layer is formed in the rear side of the strip. Its thickness is increased as moving downstream toward the sink roll. Inside the snout, the deoxidization gas flow above the free surface is much faster than the liquid flow in the zinc pot. Due to the larger influx of the flow following the moving strip in the rear side of the strip, higher percentage of imperfection can be anticipated on the rear surface of the strip.

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2003년도 International Symposium on Clean Environment
• /
• pp.177-184
• /
• 2003

Numerical simulation on marine wind and sea surface elevation was carried out using both three-dimensional hydrostatic and non-hydrostatic models and a simple oceanic model from 0900 LST, August 13 to 0900 LST, August 15, 1995. As daytime easterly meso-scale sea-breeze from the eastern sea penetrates Kangnung city in the center part as basin and goes up along the slope of Mt. Taegullyang in the west, it confronts synoptic-scale westerly wind blowing over the top of the mountain at the mid of the eastern slope and then the resultant wind produces an upper level westerly return flow toward the East Sea. In a narrow band of weak surface wind within 10km of the coastal sea, wind stress is generally small, less than l${\times}$10E-2 Pa and it reaches 2 ${\times}$ 10E-2 Pa to the 35 km. Positive wind stress curl of 15 $\times$ 10E-5Pa $m^{-1}$ still exists in the same band and corresponds to the ascent of 70 em from the sea level. This is due to the generation of northerly wind driven current with a speed of 11 m $S^{-1}$ along the coast under the influence of south-easterly wind and makes an intrusion of warm waters from the southern sea into the northern coast, such as the East Korea Warm Current. On the other hand, even if nighttime downslope windstorm of 14m/s associated with both mountain wind and land-breeze produces the development of internal gravity waves with a hydraulic jump motion of air near the coastal inland surface, the surface wind in the coastal sea is relatively moderate south-westerly wind, resulting in moderate wind stress. Negative wind stress curl in the coast causes the subsidence of the sea surface of 15 em along the coast and south-westerly coastal surface wind drives alongshore south-easterly wind driven current, opposite to the daytime one. Then, it causes the intrusion of cold waters like the North Korea Cold Current in the northern coastal sea into the narrow band of the southern coastal sea. However, the band of positive wind stress curl at the distance of 30km away from the coast toward further offshore area can also cause the uprising of sea waters and the intrusion of warm waters from the southern sea toward the northern sea (northerly wind driven current), resulting in a counter-clockwise wind driven current. These clockwise and counter-clockwise currents much induce the formation of low clouds containing fog and drizzle in the coastal region.

• 한방재활의학과학회지
• /
• 제18권4호
• /
• pp.73-83
• /
• 2008

Objectives : In this research, it was investigate that had effects on acupuncture techniques of $HT_{8}$(Shaofu) and $LR_{2}$(Xingjian) acupoints in high fat rats. We recorded data of weight gain, food intake, food efficiency, total cholesterol, triglyceride, AST, ALT, r-GTP, total bilirubin on rats fed high fat diet for 10 weeks. Methods : We divided experimental groups into four. Group of high-fat diet feeding and no treatment was control, group of high-fat diet feeding and acupuncture at $HT_{8}{\cdot}LR_{2}$ was Acu-1, group of high-fat diet feeding and acupuncture at $HT_{8}{\cdot}LR_{2}$ and rotated counter-clockwise 36times was Acu-2, high-fat diet feeding and acupuncture at $HT_{8}$(body direction)${\cdot}LR_{2}$(lower limb direction) and rotated counter-clockwise 36times was Acu-3. Results : In Acu-3 group, body weight on 2 weeks after starting acupuncture, food efficiency and the level of serum total cholesterol were decreased, and the level of HDL-cholesterol was increased. In Acu-1 group, the level of triglyceride was increased but ALT was decreased. Conclusions : These results suggest that treatment of acupuncture at $HT_{8}$(body direction)${\cdot}LR_{2}$(lower limb direction) and rotated counter-clockwise 36times may be having the influence on high fat by controlling the level of serum total cholesterol and HDL-cholesterol.

• International Journal of Ocean Engineering and Technology Speciallssue:Selected Papers
• /
• 제6권1호
• /
• pp.15-21
• /
• 2003

A common feature in the three-dimensional numerical model experiments of coastal discharge with simplified model and idealized external forcings is investigated. The velocity fields due to the buoyancy and flaw flux, are spreaded radiately and the surface velocites are much greater than the homegeneous discharges. The coastal dischargd due to the Coriolis force and flaw flux are shaped a anticyclical gyre (clockwise) and determined the scale of the gyre in the coastal zone, respectively. The bottom topography restricts a outward extention of the coastal fronts and it accelerates a southward flow.

• 치과방사선
• /
• 제21권2호
• /
• pp.317-326
• /
• 1991

The purpose of this study was to establish the principle and the clinical application of dynamic tomogram of a human head by using the dental machine. For this study, a block of wax with details lying at three parallel planes and a human dry skull were used. This experiment was reexamined the dynamic tomogram with specialized radiographic device and view box, and the radiograms taken by the change of exposure time according to the numbers of film used in x-ray taking and taken according to the change of kVp and the types of film were analyzed density with the densitometer. From this study, the obtained results were as follows: 1. When the underexposed radiograms taken by angulation of clockwise and counter-clockwise direction of the film and skull. were superimposed and moved laterally, it was possible to focus on right and left jaws and teeth. 2. The superimposition of the two underexposed radiograms according to each condition of x-ray taking showed some differencies in density visually, and the measurement of density with the densitometer was 1.23 to 1.57 in 75kVp and 1.34 to 1.70 in 90kVp. 3. The superimposition of the two underexposed radiograms according to the kinds of x-ray film showed almost equal density visually, and the measurement of density with the densiometer was 1.34 to 1.37. 4. When seven radiograms taken by each condition of x-ray taking were superimposed on the view box, a intense rear light of view box didn't transilluminate film density regardless of the conditions of x-ray taking. Even though seven radiograms taken according to types of film were superimposed on the view box, a more intense rear light of view box was required to transilluminate total density of films. 6. Long film-object distance resulted in the enlargement and blurring of radiographic images.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제34권6호
• /
• pp.628-634
• /
• 2008

The purpose of this study is to examine reproducibility of operation plan and 3-dimentional jaw movement patterns by comparing jaw position of STO with post-operative jaw position. Twenty patients with class III dental and skeletal malocclusion who were treated with Le-Fort I osteotomy and B-SSRO were reviewed. Lateral cephalometric radiographs were taken within two weeks before operation and two days after operation. Cephalometric radiographs were compared and analyzed with orthognathic computer program '$V-Ceph^{TM}$'. Post-operative maxillary advancement was insufficient compared to maxillary advancement through STO. Post-operative setback movement was over compared to mandibular setback movement through STO. But statistically this is not significant. Maxillary vertical location is insignificant on the whole. Especially post-operative maxillary clockwise rotation is significant compared to maxillary rotation through STO. Post-operative maxillary clockwise rotation tendency is generally observed in all patients. So surgeons and staffs must consider this tendency when operation plan is established ans operation is being performed. Using intra or extra oral marking points, face bow, and bite plate will make exact surgery possible.