• Journal of the korean academy of Pediatric Dentistry
• /
• v.23 no.3
• /
• pp.736-745
• /
• 1996

The conventional treatment of skeletal Class III malocclusion has been focused on application of orthopedic force primarily to the mandible. However, In Class III malocclusion with retrograde position or underdevelopment of Maxilla, this approach is not suitable treatment. These patients need an application of orthopedic forces via face-mask to the Maxilla to stimulate its growth and to change the direction of growth. In skeletal Class III patients who were treated by Face-Mask, the following results were obtained. 1. Forward growth of Maxilla was enhanced. 2. Labioversion of upper incisors and linguoversion of lower incisors were observed. 3. Mandible was rotated to clockwise direction and remodeling of B point was observed. 4. Anterior crossbite was corrected by combining of the above results.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.11 no.1
• /
• pp.249-254
• /
• 1984

This is a case report of Crouzon's disease as a kind of craniofacial dysostosis by premature closure of unilateral coronal suture, showed plagiocephalic skull. 5-year-old boy was visited for the treatment of dental caries and oral examination. Physical examination showed hypertelorism, internal strabismus, and saddle nose. Intraoral radiographs showed congenital missing of upper right and left deciduous and permanent lateral incisors. Cephalometric analysis showed shortening the posterior cranial base length, clockwise growth pattern and class III and open bite tendency. Posterior-anterior and submentovertex view showed multiple radiolucencies-digital impression on inner surface of cranial vault. Maxillo-facial and neuro-surgical treatment was required to improvement of facial esthetics and optic complications. Continuous examination was needed to the growth and development.

• Journal of the Korean Magnetic Resonance Society
• /
• v.2 no.1
• /
• pp.59-65
• /
• 1998

The correction of image artifacts due to misadjustment in tuning of RF coils (tip angle) and in the RF single sideband spectrometer was investigated using phase cycling of the $\pi$/2 and $\pi$ pulses in spin-echo sequences. A general procedure was developed for the systematic design of phase cycles that select desirable coherence transfer pathways. To analyze a phase cycling sequence, changes in the coherence level and phase factor for each RF pulse in the spin-echo cycle must be determined. Four different phase cycling schemes (FIXED, ALTERNATE, FORWARD, REVERSED) to suppress unwanted signal components such as mirror and ghost images were evaluated using two signal acquisitions. When the receiver phase factor is cycled counter-clockwise (REVERSED), these artifacts are completely removed.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.290-295
• /
• 2000

An experimental study was carried out in a cavity with upper channel and square heat surface by visualization equipment with Mach-Zehnder interferometer and laser apparatus. The visualization system consists of 2-dimensional sheet light by Argon-Ion Laser with cylindrical lens and flow picture recording system. Instant simultaneous velocity vectors at whole field were measured by 2-D PIV system(CACTUS'2000). Obtained result showed various flow patterns. Severe unsteady flow fluctuation within the cavity are remarkable and sheared mixing layer phenomena are also found at the region where inlet flow is collided with the counter-clockwise rotating main primary vortex. Photographs of Mach-Zehnder are also compared in terms of constant heat flux.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.73-80
• /
• 2006

In order to examine the validity of an asymptotic solution for nonlinear interaction in asymmetric vibration modes of a perfect circular plate, we obtain the numerical solution. The motion of the plate is governed by nonlinear partial differential equation. The initial and boundary value problem is solved by using the finite difference method. The numerical solution is compared with the asymptotic solution. It is found that traveling waves relating clockwise and counterclockwise as well as standing wave are depicted by the numerical solution.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.13 no.1
• /
• pp.1-5
• /
• 1977

A series of echo-sounding and current measurements as well as the drogue and the drift bottle experiments were carried out in Asan Bay since November 1974. Several sand bars or sand flats covered by silts were developed at ebb tide in the bay. Sand waves and sand ripples were seen on the surface of the sand bars, around which sea channels of 8~ 12 meters in depth are formed. The main stream axis of the flood current which is separated into east and west branch flows southward. A cyclonic and an anticyclonic eddy are developed at the early stage of flood tide. They are transformed into a clockwise eddy before the slack water. The maximum tidal current speed observed was 3.1 ~ 3.2 knots at the entrance of the bay, while it was 1.O ~ 2.8 knots in the bay. The location of the main stream axis of the tidal current coincides well with the sea channel. A salt wedge was observed at the estuary of the Sabgyo-cheon River.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.08a
• /
• pp.23-26
• /
• 2003

An ultrasonic motor is a motor which uses vibration -a type of elastic vibration- to obtain a driving force, which then drives the motor using friction. In this paper, mode conversion type - single resonance mode ultrasonic rotary motor that use langevin type ultrasonic vibrator was studied. This model was proposed for the first time by Japanese Kumada in 1985. In this study, finite element analysis (FEA) of a stator and bidirectional driving characteristic of a rotor was newly obtained. The amplitude and phase of displacement and elliptical trajectory of beam was confirmed by FEA The fabricated motor was operated to clockwise and counterclockwise in 40.8 [kHz] and 44.2 [kHz] respectively. But bidirectional driving characteristics did not coincide each other.

• Solar Energy
• /
• v.20 no.4
• /
• pp.53-60
• /
• 2000

An experimental study was carried out in a cavity with upper channel and square heat surface by visualization equipment with Mach-Zehnder interferometer and laser apparatus. The visualization system consists of 2-dimensional sheet light by Argon-Ion Laser with cylindrical lens and flow picture recording system. Instant simultaneous velocity vectors at whole field were measured by 2-D PIV system(CACTUS'2000). Obtained result showed various flow patterns. Severe unsteady flow fluctuation within the cavity are remarkable and sheared mixing layer phenomena are also found at the region where inlet flow is collided with the counter-clockwise rotating main primary vortex. Photographs of Mach-Zehnder are also compared in terms of constant heat flux.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.29B no.9
• /
• pp.50-58
• /
• 1992

A new algorithm for filling the interior of contours and labelling each filled region concurrently is presented. Filling is simply accomplished by inversion method. The labelling information in every scan lines is extracted directly from current direction of chain code so that the proposed algorithm needs less comparision and is more efficient. The contours are followed by two different directions, clockwise for the outer contour and counterclockwise for the inner contour to get filling and labelling information. This algorithm can be applied in case that contours are nested or regions are continous. Simulataneously the proposed algorithm can find the structure tree of object without additional post processing.

• Structural Engineering and Mechanics
• /
• v.54 no.4
• /
• pp.741-754
• /
• 2015

This study evaluates prediction models for three EDPs (engineering demand parameters) using data from three symmetrical structures with RC walls designed according to the currently enforced Romanian seismic design code P100-1/2013. The three analyzed EDPs are: the maximum interstorey drift, the maximum top displacement and the maximum shear force at the base of the RC walls. The strong ground motions used in this study consist of three pairs of recordings from the Vrancea intermediate-depth earthquakes of 1977, 1986 and 1990, as well as two other pairs of recordings from significant earthquakes in Turkey and Greece (Erzincan and Aigion). The five pairs of recordings are rotated in a clockwise direction and the values of the EDPs are recorded. Finally, the relation between various IMs (intensity measures) of the strong ground motion records and the EDPs is studied and two prediction models for EDPs are also evaluated using the analysis of residuals.