• Journal of Trauma and Injury
• /
• 제33권3호
• /
• pp.140-143
• /
• 2020

Resuscitative endovascular balloon occlusion of the aorta (REBOA) has been accepted as an adjunct procedure for non-compressible torso hemorrhage in patients with hemorrhagic shock. With appropriate indications, REBOA should be performed for resuscitation regardless of the physician's specialty. Despite its effectiveness in traumatized patients with hemorrhagic shock, performing REBOA has been challenging due to physicians' lack of experience. Even though training in endovascular skills is mandatory, many physicians cannot undergo sufficient training because of the limited number of endovascular simulation programs. Herein, we share simulation video clips, including those of a vascular circuit model for simulation; sheath preparation; long guidewire and balloon catheter preparation; ultrasound-guided arterial access; sheath insertion or upsizing; and balloon positioning, inflation, and migration. The aim of this study was to provide educational video clips to improve physicians' endovascular skills for REBOA.

• The Journal of the Acoustical Society of Korea
• /
• 제25권3E호
• /
• pp.89-94
• /
• 2006

For audio indexing and targeted search of specific audio or corresponding visual contents, the MPEG-7 standard has adopted a sound classification framework, in which dimension-reduced Audio Spectrum Projection (ASP) features are used to train continuous hidden Markov models (HMMs) for classification of various sounds. The MPEG-7 employs Principal Component Analysis (PCA) or Independent Component Analysis (ICA) for the dimensional reduction. Other well-established techniques include Non-negative Matrix Factorization (NMF), Linear Discriminant Analysis (LDA) and Discrete Cosine Transformation (DCT). In this paper we compare the performance of different dimensional reduction methods with Gaussian mixture models (GMMs) and HMMs in the classifying video sound clips.

• 한국컴퓨터정보학회논문지
• /
• 제21권3호
• /
• pp.17-23
• /
• 2016

In this paper, we propose a model of the collaborative authoring tool and its implementation results. In the 'collaborative authoring and automatic distribution system,' users can create eBooks by using partial works (primary and edited sources) on the basis of copyright information registered by the primary author. The Collaborative Authoring Tool is a part of "the collaborative authoring and automatic distribution system" developed through research on "the development of key technologies of social work protection and content mashup tools" as an R&D project granted by the Korea Copyright Commission from 2013. In the collaborative authoring and automatic distribution system, authors of primary sources such as images, audio clips and video clips for eBooks can register them together with the copyright information; users can edit the primary sources to produce secondary sources and in turn register the secondary sources on the system; and users can create and distribute eBooks by using the sources registered in the system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1033-1037
• /
• 2010

Railway signal facilities are very important because they are directly related to safe train operation. By the result of the unification of signal and station control, station control staffs have been having a hard time to grasp the knowledge about signal facilities and the fault restoration ability in a short term since the existing manuals were only made with text materials. To meet the growing demand to educate the maintenance work in actual and effective way, the maintenance manuals and periodic procedures was developed in the forms of video clips and animations with quality contents onto a DVD enabling not only to improve the maintenance works for signal facilities but to contribute budget saving and profit generating.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 B
• /
• pp.714-716
• /
• 1997

In order to prevent the belt from being damaged by metal pieces, we developed multicoil-type metal detection system. This detects the presence of belt clips and position of metal pieces in ores being transported on conveyor belt. In this research, our coil sensor of multicoil-type metal detection system is divided into two parts, exciting part (transmitter coil) and sensing part composed of two receiver coils. Each receiver coil has several coils in the direction of belt width. Multicoil-type metal detection system is operated by supplying a transmitter coil with electric power resources to generate magnetic field, and then the change of magnetic flux resulted from a metal piece on the conveyor be a is induced into sensing coils. We can prevent detector from failing to catch metal pieces due to high threshold level produced by steel belt clips and male the sensitivity of belt-width direction uniform by using multicoil-type metal detection system. Besides, this developed system can recognize precise position and size of metal piece. The experiments shows that our multicoil-type metal detection system has better performances than the conventional metal piece detector.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1997년도 가을 학술발표회 논문집
• /
• pp.181-188
• /
• 1997

This work proposes possible use of the hyperdocument as a companion for structural steel designers and also as a part of any expert system to be used for the design of steel structures. AISC Specification for Structural Steel Buildings - Allowable Stress Design and Plastic Design, June 1, 1989-has been thoroughly hyperdocumented. Database for the most of AISC standard sections has been built for easier reference to sectional properties and even for search for the relevant sections. Hardy and wxCLIPS from AIAI, The University of Edinburgh were used as development tools. Hardy is integrated with NASA's rule-based and object-oriented language CLIPS 6.0 to enable users to rapidly develop diagram-related applications. Currently this work does not include any sophisticated rule-bases. Rather, this work will form a part of the expert systems for the steel structural design to be developed later. Nevertheless, the hyperdocument of this work will make a good companion for structural steel designers in its own right.

• 한국공간구조학회논문집
• /
• 제18권1호
• /
• pp.135-143
• /
• 2018

In the current research, a seismic ceiling system as one of non-structural elements in buildings has been developed by applying newly designed vertical hanger clips combined with M-bar channel clips. In order to evaluate the seismic performance of the developed system, full-scale shaking table tests of one story frame structure with the conventional ceiling system or the developed seismic ceiling system were performed with time-history responses under earthquake loads. The developed system was also evaluated by the time-history dynamic analysis. From seismic test and analysis, it was shown that the developed seismic ceiling system could give improved seismic performances to minimize displacements and damages of ceiling systems as well as enhance seismic safety of the ceiling system.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제15권3호
• /
• pp.159-165
• /
• 2015

The need for the recognition of music emotion has become apparent in many music information retrieval applications. In addition to the large pool of techniques that have already been developed in machine learning and data mining, various emerging applications have led to a wealth of newly proposed techniques. In the music information retrieval community, many studies and applications have concentrated on tag-based music recommendation. The limitation of music emotion tags is the ambiguity caused by a single music tag covering too many subcategories. To overcome this, multiple tags can be used simultaneously to specify music clips more precisely. In this paper, we propose a novel technique to rank the proper tag combinations based on the acoustic similarity of music clips.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1997년도 하계 학술대회 논문집
• /
• pp.208-215
• /
• 1997

• 정보처리학회논문지B
• /
• 제11B권1호
• /
• pp.35-44
• /
• 2004

작은 화면을 가진 이동 단말기에서 데스크탑 화면에 맞추어 제작된 웹 컨텐츠들을 브라우징 하는 것은 많은 어려움을 갖는다. 웹 페이지에는 이동 단말기용 브라우저의 제한된 기능으로 인해 표시할 수 없는 객체가 일부 포함되어 있는 경우도 있고, 브라우저에서 호환되지 않는 마크업 표준을 사용하여 브라우징 자체가 불가능할 수도 있다. 본 논문에서는 웹 페이지를 이동 단말기에 최적화된 형태로 변환할 수 있는 웹 클리핑 방식의 새로운 이동 인터넷 컨텐츠 적응 방법을 소개한다. 이 방법에서는 컨텐츠 제공자가 클립 편집기를 이용하여 설정한 클립 명세에 따라 원본 웹 문서가 자동으로 클리핑 되고 변환된다. 클립 편집기는 컨텐츠 제공자가 단일 클립, 그룹 클립, 다중 레벨 클립, 동적 클립을 설정하고, 문서의 레이아웃을 수정할 수 있도록 한다. 이렇게 설정된 클립 명세에 따라 원본 문서로부터 추출된 각 클립들은 먼저 중간 언어 형태의 문서로 변환되고, 이는 다시 이동 단말기를 위한 최종 마크업 문서로 변환된다. 또한 다양한 이미지 타입에 대한 변환기능을 제공한다.