• 한국가스학회지
• /
• 제13권4호
• /
• pp.40-45
• /
• 2009

MSDS 자료의 적정성을 고찰하기 위해 크실렌 이성질체에 대해 Pensky-Martens 밀폐식(ASTM D93), Setaflash 밀폐식(ASTM D3278), Tag 개방식(ASTM D1310), Cleveland 개방식(ASTM D92) 장치 등을 이용하여 인화점을 측정하였으며, 또한 최소자연발화온도는 ASTM E659-78장치를 사용하여 측정하고, 문헌값들과 한국산업안전보건공단의 MSDS 자료와 비교하였다. 그 결과, 측정된 인화점과 최소자연발화온도는 이들과 차이를 나타내어 안전의 목적을 위해 연소특성치 고찰이 필요함을 알 수 있었다.

• 한국안전학회지
• /
• 제24권2호
• /
• pp.42-47
• /
• 2009

The flash point and the AIT(auto-ignition temperature) are the most important combustible properties used to determine the potential for the fire and explosion hazards of flammable material. In order to know the accuracy of data in MSDS(Material Safety Data Sheet), the flash point of n-acids were measured by using Pensky-Martens closed cup tester(ASTM D93), Setaflash closed cup tester(ASTM D3278), Tag open cup tester(ASTM D1310) and Cleveland open cup tester(ASTM D92). Also, the AIT of n-acids were measured by using ASTM E659-78 tester. The measured the flash points and the AIT were compared with literatures and MSDS in KOSHA. The measured the flash points and the AIT were different from those in literatures and MSDS. Therefore, This paper shows that it is needed to investigate the MSDS compatibility of n-acids for the fire safety objectives.

• 한국안전학회지
• /
• 제23권5호
• /
• pp.67-72
• /
• 2008

The lower flash points for the flammable binary systems, 2-propanol+formic acid and 2-propanol+n-butyric acid, were measured by Cleveland open cup tester. The optimization method using van Laar equation and the Raoult's law were used to estimate the lower flash points and were compared with experimentally-derived data. The calculated values based on the optimization method were found to be better than those based on the Raoult's law.

• 한국화재소방학회논문지
• /
• 제21권4호
• /
• pp.32-37
• /
• 2007

인화점의 정보를 확보하는 것은 화재 및 폭발의 예방을 위해 대단히 중요하다. 본 연구에서는 2-propanol+acetic acid 계와 2-propanol+n-propionic acid 계의 하부 인화점을 클리브랜드 개방식 장치를 이용하여 측정하였다. 실험값은 Raoult의 법칙, Wilson 식과 NRTL 식에 의해 계산된 값과 비교하였다. 그 결과, Wilson 식과 NRTL 식에 의한 예측값이 Raoult의 법칙에 의한 예측값 보다 실험값에 더욱 근접하였다. 또한, NRTL 식의 실험값에 대한 모사성이 Wilson 식의 그것 보다 우수하였다.

• 한국가스학회지
• /
• 제17권6호
• /
• pp.67-72
• /
• 2013

인화점은 공기와 섞인 가연성 증기의 농도가 발화하기에 충분할 때의 최저 온도로, 가연성 액체 용액의 화재 및 폭발 위험성을 분석하는데 사용되는 주된 물리적 특성치이다. 단일 성분의 인화점 정보는 여러 문헌에서 얻을 수 있으나, 가연성 이성분계 혼합물의 인화점은 충분히 제공되어 있지 않다. 본 연구의 목적은 이성분계 가연성 액체 혼합물인 아세트산-포름산계의 인화점을 측정하고, 산출하는 것이다. 인화점 측정은 Cleveland 개방식 장치를 사용하였고, 실험값은 van Laar 식과 Wilson 식을 활용한 최적화 기법에 의해 산출된 값과 비교하였다. 그리고 라울의 법칙에 의해 산출된 값과 비교되었다. 그 결과, 최적화 기법에 의한 산출값이 Rauolt의 법칙에 의한 산출값보다 실험값에 보다 근접하였다.

• 한국안전학회지
• /
• 제22권4호
• /
• pp.37-42
• /
• 2007

Flash points for the flammable binary systems, n-propanol+acetic acid and n-propanol+n-propionic acid, were measured by Cleveland open cup tester. The Raoult's law, the van Laar equation and the UNIQUAC equation were used for predicting flash points and were compared with experimentally-derived data. The calculated values based on the van Laar and UNIQUAC equations were found to be better than those based on the Raoult's law. And the predictive curve of the flash point prediction model based on the UNIQUAC equation described the experimentally-derived data more effectively than was the case when the prediction model was based upon the the van Laar equation.

• 한국화재소방학회논문지
• /
• 제25권1호
• /
• pp.57-62
• /
• 2011

인화점은 공정안전을 평가할 때 산업공정에서 가연성 액체의 중요한 연소 특성 가운데 하나이다. 본 연구에서는 클리브랜드 개방식 장치를 사용하여 n-propanol + formic acid계와 acetic acid + propionic acid계의 인화점을 측정하였다. 실험값은 Raoult의 법칙과 최적화 기법에 의해 추산된 값과 비교하였다. 그 결과, 최적화 기법에 의한 추산값이 Raoult의 법칙에 의한 추산값 보다 실험값에 더욱 근접하였다.

• 한국산업안전학회:학술대회논문집
• /
• 한국안전학회 2004년도 춘계 학술발표회
• /
• pp.162-165
• /
• 2004

• 한국안전학회지
• /
• 제32권5호
• /
• pp.25-31
• /
• 2017

The flash point, explosion limits, autoignition temperature(AIT) are important combustible properties which need special concern in the chemical safety process that handle hazardous substances. For the evaluation of the flammable properties of n-butylacetate, this study was investigated the explosion limits of n-butylacetate in the reference data. The flash points, fire points and AIT by the ignition delay time of n-butylacetate were experimented. The lower flash points of n-butylacetate by using the Setaflash and Pensky-Martens closed-cup testers were $24^{\circ}C$ and $26^{\circ}C$, respectively. The flash points of n-butylacetate using the Tag and Cleveland open cup testers are measured $31^{\circ}C$ and $40^{\circ}C$, respectively. And the fire points of n-butylacetate by the Tag and Cleveland open cup testers were measured $32^{\circ}C$ and $41^{\circ}C$. The AIT of n-butylacetate measured by the ASTM 659E tester was measured as $411^{\circ}C$. The lower explosion limit of lower flash point $24^{\circ}C$, which was measured by the Setaflash tester, was calculated to be 1.40 vol%. Also, the upper explosion limit of upper flash point $67^{\circ}C$ the Setaflash tester was calculated to be 12.5 vol%.

• 한국안전학회지
• /
• 제29권3호
• /
• pp.39-45
• /
• 2014

For the safe handling of n-hexadecane, the lower flash points and the upper flash point, fire point, AITs(auto-ignition temperatures) by ignition delay time were experimented. Also lower and upper explosion limits by using measured the lower and upper flash points for n-hexadecane were calculated. The lower flash points of n-hexadecane by using the Setaflash and the Pensky-Martens closed testers were measured $128^{\circ}C$ and $126^{\circ}C$, respectively. The lower flash points of the Tag and the Cleveland open cup testers were measured $136^{\circ}C$ and $132^{\circ}C$, respectively. The fire points of the Tag and the Cleveland open cup testers were measured $144^{\circ}C$. respectively. This study measured relationship between the AITs and the ignition delay times by using ASTM E659 apparatus for n-hexadecane. The experimental AIT of n-hexadecane was $200^{\circ}C$. The calculated lower and upper explosion limit by using measured lower $128^{\circ}C$ and upper flash point $180^{\circ}C$ for n-hexadecane were 0.42 Vol.% and 4.70 Vol.%.