• 한국태양에너지학회 논문집
• /
• 제25권3호
• /
• pp.37-45
• /
• 2005

Higher requirement of advanced building design code and the development of construction technique have resulted in more thermal and air tight buildings. This has caused the sick building syndrome in a indoor air quality has been relatively getting worse. A new concept with a solar fresh air heating and electrostatic precipitator or called as STCC(Solar Transpired Collector and Cyclone) has been proposed to solve this IAQ issue. This paper describes the assessment study of STCC system under different outdoor airflow rates. The experiment was carried out under real condition with 30CMM STCC system test facility. Incense smoke was used to study the particle concentration decay trends under outdoor airflow rates 0CMM, 10CMM, 20CMM, 30CMM, with applied voltages of 5kV and 15kV for collecting and discharging electrodes of an Electrostatic Precipitator. Result shows that the particle decay increases by increasing the outdoor airflow rates. The collection efficiency, dust cleaning effectiveness(P) and application area calculation result comparisons have also been studied. This factors could be used to estimate how a dust of indoor air quality(IAQ) and removed for a building space with a STCC system.

• 공업화학
• /
• 제19권6호
• /
• pp.640-644
• /
• 2008

저온 플라스마 공정을 이용하여 알루미늄 표면에 묻은 윤활유를 세정하였다. 아르곤이 혼합된 산소 플라스마를 사용하였으며, 아르곤의 혼합비, 방전전력, negative DC potential 등의 공정변수를 변화시키면서 실험을 수행하였다. 저온 플라스마 세정 후 케이스의 표면을 FTIR과 EDX를 사용하여 분석한 결과 순수 윤활유의 경우 대부분이 20 min 안에 제거되었다. 제거효율은 저온 플라스마 공정조건에 따라 크게 달라졌으며, 산소에 아르곤이 약 30% 혼합된 기체를 사용하여 케이스에 -500 V 이상의 negative DC potential을 걸어주고 300 W로 처리할 때 가장 높은 효율을 보였다. 하지만, 무기물이 함유된 윤활유의 경우에는 어떤 조건에서도 60% 이상의 제거효율을 얻을 수 없었다.

• 한국염색가공학회지
• /
• 제18권1호
• /
• pp.10-19
• /
• 2006

Despite several recent attempts to measure the concentration of individual catechins by HPLC, it has not been so easy to separate catechins accurately. The aim of the present work is to provide a proper condition for separating each component of catechins by HPLC analysis, and also to evaluate the experimental variables including color differences, and metal ion contents after dyeing and mordanting. Four kinds of Catechins, (-)-epicatechin(EC), (-)-epicatechin gallate(ECG), (-)-epigallocatechin(EgC), (-)-epigallocatechin gllate(EgCG) were isolated from the residues after dyeing. Catechins in Korean green tea leaves are richer when e tea leaves are younger. Higher concentration of catechins owes it to e way it is processed. The contents of catechins adsorbed in silk fabrics after dyeing were in order of EGCG>ECG>EGC>EC. We have found $68\%$ uptake of EGCG, and 116.8mg of EGCG in the silk fabrics after it was dyed with $1\%$ Korean green tea extracts. The absorbance intensity and K/S values of dyed silk fabrics were increased with dyeing temperature and time. Only the surface color of the silk fabric dyed with green tea extracts was yellowish red, but it changed from yellowish red to red with an increase in the mordant concentration. Post-mordanted silk fabrics with ferrous sulfate changed from yellowish red to red and purple color shade. In a practical evaluation, there is no significant change in color after twenty times of the continuous dry cleaning process. However, post-mordanted fabrics with ferrous sulfate faded the brightness of color after dry cleaning. Dyeing silk fabrics with a Korean tea extract reduced the metal ion contents in the silk fabrics when compared to the untreated silk fabrics. Metal contents in silk fabrics dyed and post-mordanted with $1\%$ each metal solution were 0.194 ppm for Aluminum, 1.601ppm for Copper, and 0.334 ppm for Iron. After the post-mordanting process, the heavy metal ion absorption increased, which was mainly attributed to the catechins and polyphenols in dyed silk fabrics.

• Journal of Biosystems Engineering
• /
• 제40권1호
• /
• pp.10-18
• /
• 2015

Purpose: The study was conducted to investigate the proper working conditions like the mesh size of the concave and the chaffer angle of the oscillating sieve, and the fan speed of the head-feeding rice combine for foxtail millet harvesting. Methods: The study aimed to determine the harvesting conditions for the rice combine harvester at a 0.5 m/s working speed and at $40^{\circ}$ and $55^{\circ}$ sieve chaffer angles. The harvesting loss of the foxtail millet based on the speed of the fan and the oscillating speed of the sieve was measured at three levels of fan speed and oscillating sieve speed. Results: The threshing rates of different foxtail millet varieties were 64.1~83.5% at a mesh size of 7 mm of the concave. In experimental foxtail millet harvesting, the optimal operating condition of the rice combine harvester included a $40^{\circ}$ sieve chaffer angle and a 4.8 Hz oscillating sieve (cleaning shoe) frequency. The grain loss was found to be lower at a $40^{\circ}$ than at a $55^{\circ}$ sieve chaffer angle. In field harvesting using the combine harvester, the lowest harvesting grain loss rate of the foxtail millet varieties ranged between 0.2~0.5% at a 7 mm mesh concave, $40^{\circ}$ chaffer angle, 4.8 Hz sieve frequency, and a 20 m/s fan speed at an engine speed of 2,000 revolutions per minute (RPM). Conclusions: Findings showed that foxtail millet could be harvested using the combine harvester.

• Nuclear Engineering and Technology
• /
• 제52권11호
• /
• pp.2652-2659
• /
• 2020

The methyl iodide (CH₃I) removal performance of tri-ethylene-di-amine impregnated activated carbon (TEDA-AC) used in the air cleaning unit of nuclear power plants (NPPs) should be maintained at least 99% between 24 month-performance test period. In order for evaluating the effectiveness of TEDA-AC on the removal performance of CH₃I in nuclear power plant during the operation of NPPs, the long-term test for up to 15 months was carried out under the simulated operating conditions (e.g., 25 ℃, RH 50%, ppb level poisoning gases injection) at nuclear power plants (NPPs). The TEDA-AC samples were analyzed with the Brunauer-Emmett-Teller (BET) specific surface area and TEDA content as well as CH₃I penetration test. It is clearly evident that more than 99% of CH₃I removal performance of TEDA-AC was observed in the TEDA-AC samples during 15 months of long-term operation under the simulated NPP operating conditions including the ppb level of organic and oxide form of poisoning gases. BET specific surface area and TEDA content that can affect the CH₃I removal performance of TEDA-AC were also maintained as those in new TEDA-AC during 15 months of long-term operation.

• 가정과삶의질연구
• /
• 제30권5호
• /
• pp.89-105
• /
• 2012

The purpose of this study is to analyze working mothers' demand for child care and housekeeping home services, and to investigate the present supply condition of home services in Korea. Data collection was implemented to examine the service demand of working mothers(n=700) in four areas. The data were analyzed with SPSS. The results were as follows: 1) For home-based child-care dispatch services social enterprises are superior to other private service suppliers in terms of the treatment of service workers, wages, and quality control. As for child care service contents, the provision of meals, and casual safeguards were mostly expected. The most important qualification for care providers was found to be in faithfulness, and the certification related with child care was required. An affordable wage range was perceived as ￦3,000~5,000 per hour, and part time services. For the time range, services which commenced before 9 am and terminated after between 5~6 pm were preferred. 2) For housekeeping dispatch services, standard services, including basic cleaning, preparation of meals and side dishes, special cleaning, and washing, were in demand. The required qualifications of housekeeping service providers were similar to those of child care service providers. Possessing certification was not considered as an important quality; however, personality and career type were important factors. An acceptable wage range was ￦3,000~5,000 per hour and part-time services were preferred. In terms of the service time range, services which commenced between 8~9 am and terminated between 5~7 pm were preferred.

• 한국압력기기공학회 논문집
• /
• 제15권1호
• /
• pp.62-70
• /
• 2019

The APR1400 reactor may be operated for a long time under high temperature and pressure conditions, causing damage to the stud holes and causing stud bolts and holes to stick. The present practice is to manually remove the anti-sticking agent and foreign matter remaining in the APR1400 reactor stud hole and to visually check the surface condition of the thread to check the damage status of the threads. In the case of the APR1400 reactor stud holes, manually cleaning the threads increases the risk of radiation exposure and operator's fatigue. To avoid this, the autonomous mobile robot is used to automatically clean the reactor stud holes. The purpose of this study is to optimize the cleaning performance of the mobile robot by looking at the behavior of the surface roughness of the stud surface cleaned by the brush attached to the mobile robot due to changes in brush material, thickness of wire, and rotation speed. A microscopic approach to the surface roughness of the flank is needed to investigate the effects of the newly proposed brush of the autonomous mobile robot on the thread holes. According to this experiment, it is reasonable to use STS brush rather than Carbon one. Optimal operating conditions are derived and the safety of APR1400 reactor stud holes maintenance can be improved.

• 접착 및 계면
• /
• 제24권2호
• /
• pp.69-75
• /
• 2023

최근 자기복원(self-recovery) 코팅층을 가진 자동차용 도장면 보호필름의 적용이 증대되고 있다. 본 연구에서는 poly(urea-urethane) hybrid 자기복원 코팅층을 가진 poly(vinyl chloride) 기재 보호필름에 대한 기본 물성에 대한 평가 결과를 보고한다. Poly(urea-urethane) 기반 코팅층을 구성하고 있는 주요 화합물의 비율과 코팅층의 두께 변화에 따른 자기복원성능을 확인하였으며, 색차 값 측정을 통해 내오염성능을 정량화 하였다. 또한, 소수성 첨가제로 외부 오염에 대한 표면특성을 향상시키기 위하여, 소량의 실리콘계 반응형 첨가제를 코팅 조성물에 함량에 따른 easy-cleaning 효과와 접촉각을 확인하였다. 마지막으로, poly(urea-urethane) 자기복원 코팅층을 가진 보호필름의 장기간 사용에 따른 변색 및 변형에 대한 가능성을 확인하고자 촉진 내후성 평가를 진행하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.162.1-162.1
• /
• 2010

Cavitation phenomenon has long been a difficult problem that regarded as negative event to fluid machines or industrial facilities. In the latest, however, some engineers became to understand the power of cavitation and use it to cleaning wall after developing cavitation nozzle. In this paper, we introduce new concept for power-generation system using cavitation jet flow maid by nozzle and impulse turbine in vacuum condition. The vacuum needed to make cavitation is generated naturally by Torricelli's vacuum, 10.23m effective head drop without additional power. We analyzed water's boiling and the steam's mean free path according to vacuum purity levels for nozzles and turbine blades. The nozzles make water accelerate in the neck and boil in expansion section of the nozzles. The shape of the impulse turbine is designed for absorption of the molecule's kinetic energy of the steam.

• 한국응용과학기술학회지
• /
• 제33권3호
• /
• pp.459-465
• /
• 2016

This study investigated reusability of costly guard column by ultrasonic. It also investigated various effects that affect to guard column generation by ultrasonic. When investigated 30 KHz of frequency, area of ascorbic acid is 73.0% compared to unused guard column. As a result of investigation of effect of pH, guard column by ultrasonic is effective at alkali area. As a result of investigation of solvent effect, when ethanol is used, generation rate is 81.9% as of peak area compared to the case of analysis in un used column. From the result, it indicates that regenerated guard by ultrasonic is reusable.