• 한국정밀공학회지
• /
• 제30권9호
• /
• pp.977-982
• /
• 2013

Blades of wind energy plants are exposed to external shocks or internal cracks during operation. Furthermore, the blade surfaces can be contaminated by substances such as dust, blood of birds, salt or insects which can decrease the electricity generation efficiency significantly. For this reason, many blade cleaning companies started to appear and a variety of methods for cleaning were suggested. Despite these diverse methods, there has been no study to investigate how effectively to clean the substances in quantitative manner. In this paper, the cleaning efficiency of two rotor blade cleaning methods, brush and water-jet, is examined through experiments by changing operating parameters. Then, the optimal operating conditions for both methods are derived.

• 대한기계학회논문집A
• /
• 제35권5호
• /
• pp.575-582
• /
• 2011

클리닝 블레이드는 레이저 프린터 토너 카트리지에 장착된 감광드럼 표면의 잔류 토너를 제거하는 우레탄 재질의 고무부품이다. 기존에는 고무 블레이드의 클리닝 성능과 수명에 대한 다양한 연구들이 수행되었으나, 본 연구에서는 클리닝 성능과 부품간의 간섭에 대한 구속조건들을 모두 만족하면서 클리닝 블레이드에 발생하는 최대응력을 최소화 하는 클리닝 블레이드의 형상최적설계를 수행하였다. 상용 PIDO 툴인 PIAnO 를 이용하여 클리닝 블레이드의 구조해석절차를 통합하고 자동화하였으며, 최적설계를 위해 PIAnO 에서 제공하는 실험계획법과 근사화기법, 최적화 알고리즘을 사용하였다. 최적설계 결과, 초기 모델 대비 최대응력을 32.6% 감소 시킬 수 있는 최적의 설계안을 도출하였으며, 이를 통해 본 연구에서 수행한 최적설계 방법의 유효성을 확인할 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.1041-1042
• /
• 2012

• 수산해양교육연구
• /
• 제26권1호
• /
• pp.34-48
• /
• 2014

Marine algal assemblages on the artificial reefs at three stations (Haengwon, Geumneung, Pyoseon in Jeju-do) and the growth pattern of Ecklonia cava with water depth were studied before and after rocky cleaning. Nine algal species occurred at three artificial reefs before rocky cleaning in July 2012, however, 19 algal species were found at three artificial reefs after rocky cleaning in July 2013. In particular, 13 of 19 species in 2013 were replaced by different species which were not found in July 2012. Algal biomass rapidly increased in July 2013 after rocky cleaning. The nMDS plot based on the presence and absence data of macro-algal assemblages on the artificial reefs showed that the species compositions between artificial reefs were similar to each other before rocky cleaning operations in July of 2012. However, after rocky cleaning, the species composition of macro-algal assemblages in Haengwon region was similar to that in Pyoseon region while that in Geumneung region was different to those in Haengwon and Pyseon regions in July 2013. It is needed to clarify the suitable water depth for transplantation of perennial Phaeophyta E. cava. According to the data on seasonal changes in total length, total weight, blade length, blade width, blade weight of E. cava, it began to grow rapidly from April and reached to the maximum value in June, and then degeneration of the blade occurred in July and continued to early August. Although the total length of E. cava at 10m water depth was larger than those at 5 m and 15 m water depths, there was no significant difference statistically among water depths by ANOVA test. However, in the values of total weight, blade length, blade width, and blade weight, the growth patterns at 5 m water depth were larger than those at 10 m and 15 m. Thus, it is assumed that the most suitable water depth for transplantation and its maximum growth and effective release of zoospores of E. cava will be 7~10 m water depth.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2011년도 춘계학술발표대회 논문집
• /
• pp.107-113
• /
• 2011

The windshield wiper consists of 4 parts: a blade, an arm, a linkage and a motor. The wiper blade makes contact with the windshield and is designed to be operated normally at an angle of 30~50 degrees to the front glass. If the contact pressure between the wiper blade and windshield surface is too high, noise and wear of the rubber will result. On the other hand, if the contact pressure is too low, the performance will do badly, since foreign substances such as dust and stains will not be removed well. The pressure and friction of the wiper blade has a great influence on its effectiveness in cleaning the front window. This is due to the contact of the rubber with the window. This paper presents the dynamic analysis method to estimate the performance of the flat type blade of the wiper system. The blade has a nonlinear characteristic since the rubber is an incompressible hyper-elastic and visco-elastic material. Thus, Structural dynamic analysis using a complex contact model for the blade is performed to find the characteristics of the blade. The flexible multi-body dynamic model is verified by the comparison between test and analysis result. Also, the optimization using the central composite design table is performed.

• 한국자동차공학회논문집
• /
• 제18권2호
• /
• pp.83-90
• /
• 2010

The windshield wiper consists of 4 parts: a blade, an arm, a linkage and a motor. The wiper blade makes contact with the windshield and is designed to be operated normally at an angle of 30~50 degrees to the front glass. If the contact pressure between the wiper blade and windshield surface is too high, noise and wear of the rubber will result. On the other hand, if the contact pressure is too low, the performance will do badly, since foreign substances such as dust and stains will not be removed well. The pressure and friction of the wiper blade has a great influence on its effectiveness in cleaning the front window. This is due to the contact of the rubber with the window. This paper presents the dynamic analysis method to estimate the performance of the flat type blade of the wiper system. The blade has a nonlinear characteristic since the rubber is an incompressible hyper-elastic and visco-elastic material. Thus, Structural dynamic analysis using a complex contact model for the blade is performed to find the characteristics of the blade. The flexible multi-body dynamic model is verified by the comparison between test and analysis result. Also, the optimization using the central composite design table is performed.

• 한국기계가공학회지
• /
• 제14권5호
• /
• pp.1-7
• /
• 2015

Cleaning by injecting dry ice and water is a generally adopted trend these days to clean molds (injection, diecasting foundry, press, rubber mold, etc). This cleaning method is performed manually, or by installing multiple high pressure spray nozzles. We have manufactured a turbine cleaning module device that is able to clean diecasting modules at any position and angle in the space by mounting an articulated robot instead of the existing pipe type injection nozzle, to minimize lead time and enhance working yield of the cleaning process. In this paper, we analyzed process factors that are required to design the turbine module by reviewing number of revolution, and results according to different blade angles and thicknesses of the mold release injection turbine module, using computational fiuid dynamics (CFD).

• 한국지반신소재학회논문집
• /
• 제23권2호
• /
• pp.63-75
• /
• 2024

마시는 물은 인간의 기본적인 생활권 보장을 위한 필수적 요소로 깨끗한 물에 대한 품질은 항상 확보되어야 한다. 하지만 국내 수도시설을 집중 설치하였던 2000년 초반을 기점으로 현재 노후 상수도 시설이 증가하고 있으며, 색도 및 탁도와 같은 물의 변색, 이물질 누출 등의 사고가 빈번히 발생하고 있다. 실제로 모든 관의 교체는 불가능하기 때문에 2021년 제정된 상수관망시설 유지관리업무 세부기준에서는 상수관 세척을 의무화 하였으며, 다양한 세척 공법들을 통해 유지관리가 이루어지고 있는 실정이다. 상수관 세척 공법 중 스왑피그 공법은 관 내 이물질을 물리적으로 제거하는 방법으로 세척 효율이 가장 높은 것으로 평가 받고 있다. 하지만, 세척과정에서 스왑피그의 파손 및 변형에 따라 세척 효율은 변화하며, 분실의 가능성이 존재한다. 따라서 본 연구에서는 피그 자체의 재료를 변경하여, 압축력 및 관 내벽과의 밀착력을 향상시키고자 하며, 세척 효율 극대화를 위해 회전 블레이드를 삽입된 회전식 스왑피그를 개발하였다. 또한, 분실 가능성을 제거하고, 피그의 위치 파악을 위해 고강도 와이어 및 권취 장치를 추가적으로 개발하여, 투입구부터 토출구까지를 연결하였다. 각 세부 기술의 성능 검증 이후에는 30m 구간의 테스트베드에서 본 기술을 적용하였으며, 현장 적용성 평가와 더불어 공정 시간을 측정하여 기술의 성능을 검증하였다.

• 대한기계학회논문집B
• /
• 제20권5호
• /
• pp.1639-1648
• /
• 1996

Protection of gas turbine blade from its erosion and abrasion at high temperature and pressure is the first goal to cleanup the hot gas upstream for IGCC and PFBC. Ceramic filters represent an attractive technology for particle removal at high temperature and high pressure condition. They have demonstrated being a good system for improvement of thermal efficiency and reduction of effluent pollutants in advanced coal-based power systems such as IGCC and PFBC. Ceramic filter elements currently being developed were evaluated in the previous paper. In this paper, we measured the ash size and distribution on cleaning of ceramic candle filter. The results are as follows : in this experimental range, ceramic candle filter was shown to be fully adequate for the removal process of dust under high temperature and pressure. Also filtration efficiency of ceramic candle filter was higher than 98% compared with the regulation limit of particle size in gas turbine inlet.

• 한국표면공학회지
• /
• 제33권2호
• /
• pp.101-106
• /
• 2000

SOI (Silicon-On-Insulator) substrates were fabricated with varying annealing temperature of $25-660^{\circ}C$ by a linear annealing method, which was modified RTA process using a linear shape heat source. The annealing method was applied to Si ∥ $SiO_2$/Si pair pre-contacted at room temperature after wet cleaning process. The bonding strength of SOI substrates was measured by two methods of Razor-blade crack opening and direct tensile test. The fractured surfaces after direct tensile test were also investigated by the optical microscope as well as $\alpha$-STEP gauge. The interface bonding energy was 1140mJ/m$^2$ at the annealing temperature of $430^{\circ}C$. The fracture strength was about 21MPa at the temperature of $430^{\circ}C$. These mechanical properties were not reported with the conventional furnace annealing or rapid thermal annealing method at the temperature below $500^{\circ}C$. Our results imply that the bonded wafer pair could endure CMP (Chemo-Mechanical Polishing) or Lapping process without debonding, fracture or dopant redistribution.