• 제목/요약/키워드: Clean level test

검색결과 57건 처리시간 0.024초

지역사회 중심의 산욕기 산모 추후관리 프로그램 개발을 위한 기초조사 (A Preliminary Study with the Objective of Developing a Community based Postpartum Women's Follow-up Program)

  • 김명희
    • 한국보건간호학회지
    • /
    • 제15권1호
    • /
    • pp.27-41
    • /
    • 2001
  • The purpose of this study was to discern the level of satisfaction of postpartum care in hospitals. the level of importance of traditional postpartum care and the need for home health care for postpartum women. The study's design was to obtain data needed to develop a community-based postpartum care program and to improve the quality of nursing for postpartum care recipients. Data for the study was collected from 1 March to 31 June 2000 from 116 postpartum care recipients treated in Chung-Buk, Korea. Data analysis consisted of frequency, percentage, t-test, and ANOVA. using SPSS win program. The results the of analysis were as follows: 1) The level of satisfaction of postpartum care in the hospital (mean 1.31) was very low. The most laudable items of nursing care by category were: moderate satisfaction with 'perineal wound care' (2.04) and 'afterpain observation'(2.09). The overall level of satisfaction of postpartum care in the hospital. however, was very low. 2) Among other items of postpartum care in the hospital, 'postpartum exercise' $(25.9\%)$. 'assessment and support for postpartum depression' $(25.9\%)$, 'operation wound care for women who underwent Caesarean sections' $(24.5\%)$. and 'contraception and family planning' $(20.4\%)$ showed a need for home health care for postpartum care recipients above $20\%$. 3) The level of importance of traditional postpartum care (Sanhujori) was relatively high (mean 2.72). The importance of Sanhujori by category was as followed: 'the fourth principle: protecting the body from harmful strains' was the highest (2.88), 'the third principle: eating well', 'the first principle: invigorating the body by augmenting heat and avoiding cold', 'the second principle: resting without working', 'the fifth principle: keeping clean' and 'the sixth principle: handling with the whole heart' showed 2.85, 2.80, 2.70, 2.51 and 2.46 respectively. 4) The need for home health care with Sanhujori was very low. 5) The relationship between demographic factors and the level of satisfaction with postpartum care in the hospital was as follows: the satisfaction levels were significantly different among' delivery frequency' and 'health status' alteration after delivery'. 6) The relationship between demographic factors and the importance of the Sanhujori category was as follows: There were no significant differences in the level of importance of the first and the forth principle of Sanhujori. The level of importance of the second principle of Sanhujori was significantly different among 'income' and 'family type'. The level of importance of the third principle of Sanhujori was significantly different among 'having a boy'. The level of importance of the fifth principle of Sanhujori was significantly different among 'income' and 'feeding type'. The level of importance of the sixth principle of Sanhujori was significantly different among 'education background' and 'feeding type'. In conclusion. the findings of this study illustrate the nursing needs of postpartum care recipients. It provides a challenge to caregivers in the healthcare industry to develop a continuous postpartum care program and integrative postpartum care system that embodies the oriental and western paradigm for the promotion of women's health.

  • PDF

Noise Estimation based on Standard Deviation and Sigmoid Function Using a Posteriori Signal to Noise Ratio in Nonstationary Noisy Environments

  • Lee, Soo-Jeong;Kim, Soon-Hyob
    • International Journal of Control, Automation, and Systems
    • /
    • 제6권6호
    • /
    • pp.818-827
    • /
    • 2008
  • In this paper, we propose a new noise estimation and reduction algorithm for stationary and nonstationary noisy environments. This approach uses an algorithm that classifies the speech and noise signal contributions in time-frequency bins. It relies on the ratio of the normalized standard deviation of the noisy power spectrum in time-frequency bins to its average. If the ratio is greater than an adaptive estimator, speech is considered to be present. The propose method uses an auto control parameter for an adaptive estimator to work well in highly nonstationary noisy environments. The auto control parameter is controlled by a linear function using a posteriori signal to noise ratio(SNR) according to the increase or the decrease of the noise level. The estimated clean speech power spectrum is obtained by a modified gain function and the updated noisy power spectrum of the time-frequency bin. This new algorithm has the advantages of much more simplicity and light computational load for estimating the stationary and nonstationary noise environments. The proposed algorithm is superior to conventional methods. To evaluate the algorithm's performance, we test it using the NOIZEUS database, and use the segment signal-to-noise ratio(SNR) and ITU-T P.835 as evaluation criteria.

환경물질을 제외한 전자부품의 신뢰성평가 방법 연구 -Pb와 Br을 제거한 PWB를 중심으로- (Reliability Assessment Methods for Electronic Component Removed Environmental Materials - focused on Printed Wiring Board without Pb and Br -)

  • 이종범;조재립
    • 한국신뢰성학회지:신뢰성응용연구
    • /
    • 제5권2호
    • /
    • pp.241-259
    • /
    • 2005
  • The environmental problem is a main subject of the 21C and an environment destruction phenomenon by various kinds of environmental materials is reaching serious level. Nations to be classified as the environmental developed country, are born again environmental rich country. And they earn a large income by trade Every kind environmental resource in an international commercial transaction. Especially, the study that a reliability assessment method to prevent to reliability problem to be happened when the solder lead(lead-free solder), non-cd component, non-bromide component(without the polybrominated biphenyls(PBB) and polybrominated diphenyl ethers(PBDE))and hexavalent chromium(Cr VI) clearance component and mercury-free applied to electronic equipment is progressed. As the result of the study for applying of a reliability assessment technique of lead-free solder that recognized the most of urgent problem at the company, combination accelerated life test could taken by adding and appling the part of a humidity acceleration part to Eyring Model which is proposed by R.E.Thomas. The reliability assessment methods study of PWB clean environmental materials is expected to respond to a reliability elevation and environmental material regulation policy spreading all over the world by beginning form Europe.

  • PDF

실내 건축 마감자재의 공기오염물질 방출량 분석 (Measurement of Air Contaminants Emission from Interior Finish Material)

  • 김윤덕;임수영
    • 교육시설
    • /
    • 제14권1호
    • /
    • pp.58-65
    • /
    • 2007
  • For the moderns who spend more than 80% of the time inside a building, interior environment became important since it directly affects their health. Recently as noxiousness of the air contaminants of the interior space stood out as well as the above trend, the Ministry of Environment enacted a lawto maintain the interior air quality at certain level of standard in the multi use facility and newly constructed apartment. To make the indoor air clean, removal technology of various contaminants should be developed and interior materials with chemical treatment should be restrained. In other words, selection of interior finish affects indoor air quality from the initial design stage to the construction stage. However, only limited contaminants emission data of building materials are supplied by related companies. There is no average contaminants emission data for overall materials. Moreover, high cost and equipments for one time measurement of VOCs emission of interior finish are the obstacles of active research and data measurement. Therefore, this paper searched the current condition of average VOCs & HCHO emission of various interior finish based on the study requested to research center from the building material company through Stands Test Method for Indoor Air Quality.

제주 서광지역에 대한 풍력에너지의 장기간 (10년) 특성 (Characteristics of Wind Energy for Long-term Period (10 years) at Seoguang Site on Jeju Island)

  • 고경남;김경보;허종철
    • 한국태양에너지학회 논문집
    • /
    • 제28권3호
    • /
    • pp.45-52
    • /
    • 2008
  • In order to clarify characteristics of variation in wind energy over a long-term period, an investigation was carried out at Seoguang site on Jeju island. The wind data for 10 years from Automatic Weather System (AWS) were analyzed for each year. The variation in the annual energy production (AEP) for the 2 MW wind turbine was estimated through statistical work. The result shows that the range of the yearly average wind speed at 15 m above ground level for 10 years was from -22.6% to +13.7%, which is wider range than that in Japan. The coefficient of variation for the AEP was 22.7%, which is about twice of that for the yearly average wind speed. Therefore, for estimating the wind energy potential accurately at a given site, the wind data should be analyzed over a long-term period based on the data from the meteorological station.

환경물질을 제외한 전자부품의 신뢰성평가 방법 연구 -Pb와 Br을 제거한 PWB를 중심으로- (Reliability Assessment Methods for Electronic Component Removed Environmental Materials - focused on Printed Wiring Board without Pb and Br -)

  • 이종범;조재립
    • 한국신뢰성학회:학술대회논문집
    • /
    • 한국신뢰성학회 2005년도 학술발표대회 논문집
    • /
    • pp.393-404
    • /
    • 2005
  • The environmental problem is a main subject of the 21C and an environment destruction phenomenon by various kinds of environmental materials is reaching serious level. Nations to be classified as the environmental developed country, are born again environmental rich country. And they earn a large income by trade Every kind environmental resource in an international commercial transaction. Especially, the study that a reliability assessment method to prevent to reliability problem to be happened when the solder lead(lead-free solder), non-cd component, non-bromide component(without the polybrominated biphenyls(PBB) and polybrominated diphenyl ethers(PBDE))and hexavalent chromium(Cr VI) clearance component and mercury-free applied to electronic equipment is progressed. As the result of the study for applying of a reliability assessment technique of lead-free solder that recognized the most of urgent problem at the company, combination accelerated life test could taken by adding and appling the part of a humidity acceleration part to Eyring Model which is proposed by R.E.Thomas. The reliability assessment methods study of PWB clean environmental materials is expected to respond to a reliability elevation and environmental material regulation policy spreading all over the world by beginning form Europe.

  • PDF

Potential wind power generation at Khon Kaen, Thailand

  • Supachai, Polnumtiang;Kiatfa, Tangchaichit
    • Wind and Structures
    • /
    • 제35권6호
    • /
    • pp.385-394
    • /
    • 2022
  • The energy demand of the world is increasing rapidly, mainly using fossil energy, which causes environmental damage. The wind is free and clean energy to solve the environmental problems. Thailand is one of the developing nations, and the majority of its energy is obtained from petroleum, natural gas and coal. The objective of this study is to test the characteristics of wind energy at Khon Kaen in Thailand. The wind measurement tools, the 3-cup anemometers to measure wind speed, and wind vanes to measure wind direction, were mounted on a wind tower mast to record wind data at the heights of 60, 90 and 120 meters above ground level (AGL) for 5 years between January 2012 and December 2016. The results show that the annual mean wind speeds were 3.79, 4.32 and 4.66 m/s, respectively. The highest mean wind speeds occurred in June, August and December, in order, and the lowest occurred in September. The majority of prevailing wind directions were from the North-East and South-West directions. The average annual wind shear coefficient was 0.297. Furthermore, five wind turbines with rated power from 0.85 to 4.5 MW were selected to estimate the wind energy output and it was found that the maximum AEP and CF were achieved from the low cut-in speed and high hub-height wind turbines. This important information will help to develop wind energy applications, such as the plan to produce electricity and the calculation of the wind load that affects tall and large structures.

HPLC-FLD 및 LC-MS/MS에 의한 두류 중 제랄레논 오염실태 조사 (A Survey of Zearalenone in Beans Using High Performance Liquid Chromatography-Fluorescence Detector (HPLC-FLD) and Ultra Performance Liquid Chromatography Tandem Mass Spectrometry (LC-MS/MS))

  • 장미란;이창희;이효정;김지연;손상혁;신춘식;김소희;김대병
    • 한국식품과학회지
    • /
    • 제40권3호
    • /
    • pp.354-359
    • /
    • 2008
  • 국내유통 중인 대두, 붉은콩, 검은콩 녹두 등 6품목의 두류 총 127건을 immunoaffinity column 정제방법 및 HPLC-FLD을 이용하여 제랄레논에 대한 오염실태를 조사하였다. 상관계수($R^2$) 0.999 이상으로 양호한 직선성을 보였고 검출한계 및 정량한계는 각각 2.0 ${\mu}g/kg$, 6.0 ${\mu}g/kg$, 회수율 82.2-98.4%로 나타났다. RSD가 0.82-6.40%로 양호한 재현성을 나타내었다. 모니터링 결과, 대두(백태) 27건 중 1건(3.7%)에서 37.62 ${\mu}g/kg$ 검출되었고 붉은콩(팥) 27건 중 12건 검출되어 44.4%의 검출율을 보였고 그 오염수준은 8.01-38.98 ${\mu}g/kg$이었다. 나머지 시료 검정콩 16건, 녹두 24건, 서리태(속청) 19건, 서목태(약콩) 14건에서는 모두 검출되지 않았다. 따라서 총 시료 127건 중 13건 검출되어 10.2%의 검출율을 보였고 그 오염수준은 8.01-38.98 ${\mu}g/kg$이었다, 검출시료 13건을 LCMS/MS로 확인한 결과 모두 제랄레논임이 확인되었다. 본 연구결과에서 나타난 두류의 검출빈도 및 오염수준은 유럽연합에서 설정된 기준규격 이하의 수준이었으나 곰팡이독소의 생성의 특이성을 고려한다면 지속적이고 광범위하게 오염실태 조사가 되어야 한다고 판단된다.

Bacterial Contamination and Disinfection Status of Laryngoscopes Stored in Emergency Crash Carts

  • Choi, Jae Hyung;Cho, Young Soon;Lee, Jung Won;Shin, Hee Bong;Lee, In Kyung
    • Journal of Preventive Medicine and Public Health
    • /
    • 제50권3호
    • /
    • pp.158-164
    • /
    • 2017
  • Objectives: To identify bacterial contamination rates of laryngoscope blades and handles stored in emergency crash carts by hospital and area according to the frequency of intubation attempts. Methods: One hundred forty-eight handles and 71 blades deemed ready for patient use from two tertiary hospitals were sampled with sterile swabs using a standardized rolling technique. Samples were considered negative (not contaminated) if no colonies were present on the blood agar plate after an 18-hour incubation period. Samples were stratified by hospital and according to the frequency of intubation attempts (10 attempts per year) using the ${\chi}^2-test$ and Fisher exact test. Results: One or more species of bacteria were isolated from 4 (5.6%) handle tops, 20 (28.2%) handles with knurled surfaces, and 27 (18.2%) blades. No significant differences were found in microbial contamination levels on the handle tops and blades between the two hospitals and two areas according to the frequency of intubation attempts. However, significant differences were found between the two hospitals and two areas in the level of microbial contamination on the handles with knurled surfaces (p<0.05). Conclusions: Protocols and policies must be reviewed to standardize procedures to clean and disinfect laryngoscope blades and handles; handles should be re-designed to eliminate points of contact with the blade; and single-use, one-piece laryngoscopes should be introduced.

Dentinal tubule penetration of sodium hypochlorite in root canals with and without mechanical preparation and different irrigant activation methods

  • Renata Aqel de Oliveira;Theodoro Weissheimer;Gabriel Barcelos So ;Ricardo Abreu da Rosa ;Matheus Albino Souza;Rodrigo Goncalves Ribeiro ;Marcus Vinicius Reis So
    • Restorative Dentistry and Endodontics
    • /
    • 제48권1호
    • /
    • pp.1.1-1.11
    • /
    • 2023
  • Objectives: This study evaluated the dentinal penetration depth of 2.5% sodium hypochlorite (NaOCl) in root canals with and without preparation and different irrigant activation protocols. Materials and Methods: Sixty-three bovine mandibular incisors were randomly allocated to 6 groups (n = 10): G1, preparation + conventional needle irrigation (CNI); G2, preparation + passive ultrasonic irrigation (PUI); G3, preparation + Odous Clean (OC); G4, no preparation + CNI; G5, no preparation + PUI; G6, no preparation + OC; and CG (negative control; n = 3). Samples were filled with crystal violet for 72 hours. Irrigant activation was performed. Samples were sectioned perpendicularly along the long axis, 3 mm and 7 mm from the apex. Images of the root thirds of each block were captured with a stereomicroscope and analyzed with an image analysis software. One-way analysis of variance, followed by the Tukey post hoc test, and the Student's t-test were used for data analysis, with a significance level of 5%. Results: The NaOCl penetration depth was similar when preparation was performed, regardless of the method of irrigation activation (p > 0.05). In the groups without preparation, G6 showed greater NaOCl penetration depth (p < 0.05). The groups without preparation had a greater NaOCl penetration depth than those with preparation (p = 0.0019). Conclusions: The NaOCl penetration depth was similar in groups with root canal preparation. Without root canal preparation, OC allowed deeper NaOCl penetration. The groups without preparation had greater NaOCl penetration than those undergoing root canal preparation.