• Membrane Journal
• /
• v.34 no.1
• /
• pp.70-78
• /
• 2024

A photo-crosslinked anion exchange membrane (AEM) based on quaternary-aminated polyacrylates was developed for reverse electrodialysis (RED). Although reverse electrodialysis is a clean and renewable energy generation system, the low power output and high membrane cost are serious obstacles to its commercialization. Cross-linked AEMs without any polymer supporters were fabricated through photo-crosslinking between polymer-typed acrylates with anion conducting groups, in particular, polymer-typed acrylates were synthesized based on engineering plastic with outstanding mechanical and chemical property. The fabricated membranes showed outstanding physical, chemical, and electrochemical properties. The area resistance of the fabricated membranes (CQAPPOA-20, CQAPPOA-35, and CQAPPOA-50) were ~50% lower than that of AMV (2.6 Ω cm²). Moreover, the transport number of CQAPPOA-35 wase comparable to that of AMV, despite the thin thickness (40 ㎛) of the fabricated membranes. The RED stack with the CQAPPOA-35 membrane provided an excellent maximum power density of 2.327 W m^-2 at a flow rate of 100 mL min^-1, which is 15% higher than that (2.026 W m^-2) of the RED stack with the AMV membrane. Considering easy fabrication process by UV photo-crosslinking and outstanding RED stack properties, the CQAPPOA-35 membrane is a promising candidate for REDs.

• Korean Journal of Materials Research
• /
• v.15 no.3
• /
• pp.161-165
• /
• 2005

We investigated selective dry etching of GaAs over AlGaAs and InGaP in high density planar inductively coupled $BCl_3/SF_6$ plasmas. The process parameters were ICP source power (0-500 W), RE chuck power (0-30W) and gas composition $(60-100\%\;BCl_3\;in\;BCl_3/SF_6)$. The process results were characterized in terms of etch rate, selectivities of GaAs over AlGaAs and InGaP, surface morphology, surface roughness and residues after etching. $BCl_3/SF_6$ selective etching of GaAs showed quite good results in this study. Selectivities of GaAs $(GaAs:AlGaAs\~36:1,\;GaAs:InGaP\~45:1)$ were superior at $18BCl_3/2SF_6$, 20 W RF chuck power, 300 W ICP source power and 7.5 mTorr. Addition of $(5-15\%)SF_6\;to\;BCl_3$ produced relatively high selectivities of GaAs over AlGaAs and InGaP during etching due to decrease of etch rates of AlGaAs and InGaP (boiling points of etch products: $AlF_3\~1300^{\circ}C,\;InF_3>1200^{\circ}C$ at atmosphere) at the condition. SEM and AFM data showed slightly sloped sidewall and somewhat rough surface$(RMS\~9nm)$. XPS study on the surface of processed GaAs proved a very clean surface after dry etching. It shows that planar inductively coupled $BCl_3/SF_6$ plasmas could be a good candidate for selective dry etching of GaAs over AlGaAs and InGaP.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.10
• /
• pp.1664-1672
• /
• 2013

Solar salt is manufactured naturally, and therefore, it contains insoluble substances such as sandy compounds. This study is performed in order to effectively produce clean sea salt by removing the impurities in sea salt through filtration and evaporation in a vacuum condition. Brine was concentrated and crystallized at $90^{\circ}C$ by a rotary vacuum evaporator, which was then recovered as salt crystals by filtration, and then the salt was dehydrated. Manufacturing yields were determined by the amount of water evaporation. Brine was concentrated to 40%, 50% and 60% of the initial volume of brine and manufactured salt were designated as 40S, 50S and 60S, respectively. The salt produced by this process is called ESBS (evaporated salt with brine from salt-farm). The yield of 40S, 50S and 60S were 7.22%, 10.79% and 15.06%, respectively. The NaCl concentration of 40S and 50S were 90.38% and 91.16%, respectively. From a sensory evaluation analysis, the most tasty salt was 40S and the bitter salt was 60S. The average contents of sand compound and insoluble substances in ESBS were 0.001~0.012% and 0.067~0.12%, respectively. The mineral compositions, such as Na, Mg, K, and Ca of 40S and 50S were similar with those of the natural solar salt. In solubility tests, the solubility (g of salt/100 mL $H_2O$/sec) of 40S, 50S, and 60S was 0.69, 0.70, and 0.69, respectively. On the other hand, the solubility of natural solar salt was 0.47. By comparing the water reabsorption rate analysis results, water reabsorption rate of 40S and 50S was about 3 to 5 times lower than that of the solar salt. In the aspects of physical and chemical properties, such as minerals, impurities, solubility and moisture re-absorption rate, salts developed in this study are judged to be better than that of the general solar salt.

• Korean Journal of Food Science and Technology
• /
• v.33 no.1
• /
• pp.33-39
• /
• 2001

To develop a method for separation process using Sep-pak $C_18$, simultaneous and systematic analysis of 8 permitted and 11 non-permitted synthetic food colors in Korea, optimization of analysis conditions for reverse phase ion-pair high performance liquid chromatography was carried out. For the best result of Sep-pak $C_18$ separation the pH of color standard mixture solution was $5{\sim}6$ and 0.1% HCl-methanol solution were set as eluent. The colors eluated from Sep-pak $C_18$ cartridge were determined and confirmed by high performance liquid chromatography with a photodiode array detector at 420 nm for yellow colors type, at 520 nm for red colors type, at 600 nm for blue and green colors type and at 254 nm for mixed colors. Conditions for HPLC analysis were as follows: column, Symmetry $C_18$ (5 m, 3.9 mm $i.d.{\times}150\;mm$); mobile phase, 0.025 M ammonium acetate (containing 0.01 M tetrabutylammonium bromide) : acetonitrile : methanol (65 : 25 : 10) and 0.025 M ammonium acetate(containing 0.01 M tetrabutylammonium bromide) : acetonitrile : methanol (40 : 50 : 10); flow rate, 1 mL/min. It takes 35 minutes for simultaneaus analysis and 18 minutes for systematic analysis. The detection limits range of each colors were $0.01{\sim}0.05\;{\mu}g/g$.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.2
• /
• pp.1-9
• /
• 2011

This study concerns the Baekje Traditional Garden, one of the open spaces in the Lotte Resort in the Baekje Historical Reappearance Complex, which is part of the comprehensive plan for specific areas in the Baekje cultural area. The Baekje Traditional Garden has historic value, and its excellent garden style influenced the ancient Japanese gardens. This study dealt with three issues: (1) The context in which Lotte Buyeo Resort accepted the Baekje Traditional Garden, particularly the background and process of such; (2) The original form of the Baekje Traditional Garden; and (3) How the Baekje Traditional Garden should be represented in the open space of the resort. Representation is accomplished in two ways: using the structure of the original garden and in the borrowing of elements. For representation using the structure of the original garden, Imrugak was used as the main entrance space, and Wolsunjung was represented from the Ganbuklee remains. In the rear garden are wave watercourses and other garden facilities of the Wanggungri site in Iksan. Borrowing of elements, on the other hand, was accomplished in the plant plan and detailed development. In addition, mountaintops (three mountains and five mountain summits), a clean stream between mountains, and a pine forest are visualized in the garden. This is the representative landscape of the Taoist hermit world that appeared in the Baekje Gilt Bronze Incense Burner and Landscape pattern. The significance of this study is twofold. First, the Baekje Traditional Garden is a fresh trail because there has been no previous research concerning it. Second, while past research concerning traditional spaces focused on the results of representation, this study focused on the process of representation. This means that this research work tried to extend the study concerning the representation of traditional spaces from the conceptual to the practical approach. This study, however, also has its limitations. The authenticity of the representation suggested in this study may be questioned later because efforts have been made to preserve the original Baekje Traditional Garden. In addition, this study should seek a balance between authenticity on one hand and amusement and diversity of experience on the other, because the site is a resort.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.5
• /
• pp.217-240
• /
• 2023

For a while, Functional cosmetics, Cosmeceutical cosmetics, and Derma cosmetics have gained trust and become popular due to the consumers' strong interest in ingredients & efficacy. It's remarkable that Clean or Vegan brands are growing fast because they are emphasizing on different values from the other cosmetic brands. It's needed to attempt to analyze the influence relationship between consumer lifestyle and social value in these changes, and to find out whether the consumption of vegan cosmetics is related to satisfying the need for self-expression in a social atmosphere where ESG is emphasized on. This study analyzed the effect of lifestyle types and self-expression needs on the purchase intention of vegan cosmetics by mediating social values for cosmetics consumers. Lifestyle types were classified into appearance-oriented, health-oriented, and fashion-oriented. For empirical analysis, 321 questionnaires collected from cosmetics consumers living across the country were used. SPSS v26.0 and PROCESS macro v4.2 were used to analyze based on a single mediating model as a single mediator. As a result of the analysis, first, lifestyle types and self-expression needs, excluding appearance-oriented types, were found to have a positive (+) effect on social values. Second, it was found that social value had a positive (+) significant effect on the purchase intention of vegan cosmetics. Third, appearance-oriented, health-oriented, trend-seeking lifestyle types and self-expression needs were all found to have a positive (+) effect on the purchase intention of vegan cosmetics. Fourth, social values were found to mediate lifestyle types, self-expression needs, and purchase intentions, except for appearance-oriented types. Appearance-oriented consumers do not directly affect social values but affect purchase intentions, suggesting that appearance-oriented consumers may not be significantly affected by product-related social values. In a comparison of the relative influence size using standardization coefficients, self-expression needs had the greatest impact on the purchase intention of vegan cosmetics when mediating social values, and health-oriented ones had the least impact. The academic implications of this study include contributing to consumer behavior research by providing insights, mediation mechanisms, and consideration of the niche consumer sector, and directing further research into the cosmetics industry beyond forming marketing strategies and sustainable business practices.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.9
• /
• pp.1013-1019
• /
• 2007

Electronic wastes have increased tremendously. However, any reliable treatment methodologies have rarely been established. Electronic wastes have posed serious disposal problem due to their physico-chemical stability. This paper investigated the application possibility of pyrolysis for the purpose of recycling the p-CCL(phenol based Copper Clad Laminate). Thermogravimetric analysis(TGA) was used to investigate the thermal decomposition pattern of p-CCL. We elucidated the characteristics of pyrolysis by-products at operating temperatures of 280, 350 and $600^{\circ}C$. GC/MS and FT-IR were used to characterize the liquid by-products along with general characterization methods such as Ultimate Analysis, Proximate Analysis and Heating Value, whereas general characterization methods were only introduced for the solid by-products. At a heating rate of $5^{\circ}C$/min, TGA curves exhibited three decomposition stages: (1) low-temperature decomposition region$(<280^{\circ}C)$, (2) medium temperature region$(280\sim350^{\circ}C)$ and (3) high-temperature region$(>350^{\circ}C)$. The major compounds of liquid by-products at low- and medium-temperatures were accounted for by water and phenol, whereas branched phenols and furans were major compounds at high-temperatures. As the temperature increases, volatile quantities decreased but the fixed carbon increased. High heating values of solid by-products($7,400\sim7,600$ kcal/kg) would suggest that the solid by-products could be applicable as fuel. In addition, high fixed carbon but low ash content of the solid by-products offered an implication that they are capable of being upgradable for adsorbent after applying appropriate activating process.

• Journal of Food Hygiene and Safety
• /
• v.26 no.2
• /
• pp.142-149
• /
• 2011

An isocratic high performance liquid chromatography (HPLC) method for routine analysis of deoxynivalenol in noodles was validated and estimated the measurement uncertainty. Noodles (dried noodle and ramyeon) were analyzed by HPLC-ultraviolet detection using immunoaffinity column for clean-up. The limits of detection (LOD) and quantification (LOQ) were 7.5 ${\mu}g$/kg and 18.8 ${\mu}g$/kg, respectively. The calibration curve showed a good linearity, with correlation coefficients $r^2$ of 0.9999 in the concentration range from 20 to 500 ${\mu}g$/kg. Recoveries and Repeatabilities expressed as coefficients of variation (CV) spiked with 200 and 500 ${\mu}g$/kg were $82{\pm}2.7%$ and $87{\pm}1.3%$% in dried noodle, and $97{\pm}1.6%$ and $91{\pm}12.0%$ in ramyeon, respectively. The uncertainty sources in measurement process were identified as sample weight, final volume, and sample concentration in extraction volume as well as components such as standard stock solution, working standard solution, 5 standard solutions, calibration curve, matrix, and instrument. Deoxynivalenol concentration and expanded uncertainty in two matrixes spiked with 200 ${\mu}g$/kg and 500 ${\mu}g$/kg were estimated to be $163.8{\pm}52.1$ and $435.2{\pm}91.6\;{\mu}g$/kg for dried noodle, and $194.3{\pm}33.0$ and $453.2{\pm}91.1\;{\mu}g$/kg for ramyeon using a coverage factor of two which gives a level of statistical confidence with approximately 95%. The most influential component among uncertainty sources was the recovery of matrix, followed by calibration curve.

• Journal of Korean society of Dental Hygiene
• /
• v.8 no.4
• /
• pp.19-30
• /
• 2008

This study reached the following conclusions as a result of carrying out the questionnaire survey of self-descriptions for the satisfaction after the citizens of Daejon uses the dental clinics, in order to identify the factors of satisfaction to the medical services of such dental clinics to be utilized in the patient management by dental hygienists, provide the basic data to provide the medical services desired by patients. 1. 43.9% men responded to the facilities and 56.1% women to the atmosphere for the standards of selection of dental clinics by general characteristic, and the college graduates or more to the kindness (38.2%), high-school graduates (43.2%) and middle-school graduates (25.9%) or less to the close distance for the level of educational attainment (p=0.009), which was meant to have a statistical significance. 2. The execution of reservation system for the dental clinics showed 54.7%, the reserved time was observed upon the execution of such reservation system, the dental clinics where they practice such system were 40.6%, and the confirmation methods was done through the telephone with 62.5%. 3. The experience of fear upon the dental treatment showed 74.6%. The type of fear showed the machine sound (48.7%) for men and cry of others for women (70.8%) at the highest. 70% of those under 30 at the age responded to the sharp instruments at the highest. 83.3% of Yousung-gu showed the highest by responding to the cry of others for the residential areas. The statistically significant difference was shown in both the age and residential area (p=0.000). 4. Women showed higher in the distribution of gender for the sterilization of instruments for the external satisfaction of dental clinics(p=0.000) and those under 30 at the age showed the highest with 2.98${\pm}$0.95(p=0.001). Seo-gu (3.48${\pm}$0.77) was the highest for the residential area (p=0.000), and there was statistically significant differences in the gender, age and residential area. 5. Men showed higher satisfaction than women in the clean state and the statistically significant differences were shown (p=0.000) at the age as the high satisfaction was shown for those under 30 at the age (2.35${\pm}$0.79), those having the income not less than 10 million won and not more than 20 million won (2.43${\pm}$0.78), and Seo-gu (2.63 ${\pm}$0.69) for the residential area. 6. For the internal satisfaction of dental clinic by users for the medical services in the dental clinics, 61.1% women responded to no in the ability of solving the inconvenience in the service process, and showed low ability of solving the inconvenience from 30 at the age (26.2%) and by responding to Dong-gu (22.1%) for the residential area, showing statically significant differences(p=0.000). For the re-use of dental clinics, 46.6% men (p=0.043) for the gender, 24.3% under 30 at the age and 22.9% of Dong-gu for the residential area responded to the re-use, showing statistically significant differences for the gender and residential area (p=0.000). 7. The dissatisfaction showed a high rate of 69.5% for the satisfaction to the medical services of dental clinics. 46.2% men responded to the pain and women to the feeling of foreign substance for the reason of dissatisfaction while those under 30 at the age showed 55.6% for others, those between 50 and 59 41.7% for the feeling of foreign substance. 86.3% carried out the education for cautions after the treatments and most people turned out that they do not carry out the continuous health management of mouth as 20.5% responded to that they carry out such health management.

• Korean Journal of Plant Resources
• /
• v.25 no.5
• /
• pp.624-632
• /
• 2012

As there have been lately many worldwide resource challenges such as potential exhaustion of fossil fuels, sudden rise of oil price and ever-rising grain pricing due to global food crisis, there have been more interests focused on recycling vegetable oils and fats into clean natural fuel and producing new resources based on waste cooking oil as a part of reusing waste resources. An Experiment was performed by using ratio of 50:50, 75:25 (w/w) mixture of based rapeseed oil, camellia oil, and olive oil. 50:50, 25:75 (w/w) mixture of based palm oil. The result was that the oleic acid ($C_{18:1}$) got the lowest percentage of 42.8%, when we combined the mixture of rapeseed oil and soybean oil. While the highest percentage of 72.1% was when the mixture of camellia oil and rapeseed oil were combined at 50:50 ratio. In 75:25 (w/w) case, mixture of rapeseed oil and soybean oil got the lowest. The highest ratio was the mixture of camellia oil and olive oil. Based on the component of palm oil, the total saturated fatty acid was decreased. It is expected that stabilizing oxidation through controlling of fatty acid after mixture and that liquidity at a low temperature. The acid value indicated that stabilizing oxidation got a range of highest to lowest. Camellia oil ranked as the highest, followed by olive oil, and the oil seeds as the lowest in rank. Controlling iodine value through mixture and improvement of stabilizing oxidation will provide a good quality. The quality of color has no significant change about mixture in ratio and maintenance. The reduction of the cost of refining process is expected by controling of mixture ratio at biodiesel production in the future.