• Journal of the Korea Society of Computer and Information
• /
• v.28 no.11
• /
• pp.245-252
• /
• 2023

In this study, we analyzed elementary school teachers' perception and method of establishing a new subject according to their computing competency. First, we developed a survey on the need to establish a new elementary school informatics. We also collected data from 166 elementary school teachers. As a result of the analysis, opinions differed on the establishment of information subjects depending on teachers' computing competencies. Teachers also showed differences in the characteristics of their subjects, number of class hours, and methods of organizing classes. As the results, we found that in order to establish a new information subject, a plan must be prepared to raise awareness and the need for informatics subjects among teachers who have low computing compency or no major in computer-related fields. We hope that many elementary school teachers will recognize the necessity and importance of establishing a new information subject.

• Explosives and Blasting
• /
• v.41 no.3
• /
• pp.73-92
• /
• 2023

With the increase of risk of gas explosion, various methods for indirectly estimating the explosion paramaters, which are required for the prediction of gas explosion scale and impact. In this study, the characteristics of the most frequently used methods such as TNT equivalent method, TNO multi-energy method, and BST method and the processes for determining the parameters of the methods were compared. In the case of TNT equivalent method, an adequate selection of the efficiency factor for various conditions such as the type of vapor cloud explosion and explosion material is needed. There is no objective guidelines for the selection of class number in TNO multi-energy method and it is not possible to estimate negative overpressure. It was found that there were some mistakes in the reported parameter values and suggested corrected values. BST method provides more detailed guidelines for the estimation of the explosion parameters including negative overpressure, but the graphs used in this methods are not clear. In order to overcome the problem, the graphs were redrawn. A more convenient estimation of explosion parameters with the numerical expression of the redrawn graphs will be available in the future.

• Journal of The Korean Association For Science Education
• /
• v.26 no.2
• /
• pp.258-267
• /
• 2006

The purpose of this study was to investigate the practical use of process skill under the seventh curriculum at secondary school and teachers' perceptions about hypothesis. Two hundred and twenty-two secondary science teachers responded to a survey. Among all process skills, data interpretation was found to be used most frequently by science teachers. The second most-commonly utilized skill was conclusion, and the least employed skill was hypothesis formation followed closely by data transformation. In addition to these results, the most difficult process skill practised by science teachers was hypothesis formation, followed by data transformation, and controling variables. A majority of science teachers (63.1%) properly defined hypothesis, but only a significant number (5.0%) chose the correct example about hypothesis in real-world contexts. More than ninety percent of science teachers believed the skill of hypothesis formation could be put to use in junior high to senior high school, but practical use of the skill, was too difficult for the science class

• Animal Bioscience
• /
• v.37 no.1
• /
• pp.50-60
• /
• 2024

Objective: Testicular fat deposition has been reported to affect animal reproduction. However, the underlying mechanism remains poorly understood. The present study explored whether sperm meiosis and testosterone synthesis contribute to mouse testicular fat deposition-induced reproductive performance. Methods: High fat diet (HFD)-induced obesity CD1 mice (DIO) were used as a testicular fat deposition model. The serum hormone test was performed by agent kit. The quality of sperm was assessed using a Sperm Class Analyzer. Testicular tissue morphology was analyzed by histochemical methods. The expression of spermatocyte marker molecules was monitored by an immuno-fluorescence microscope during meiosis. Analysis of the synthesis of testosterone was performed by real-time polymerase chain reaction and reagent kit. Results: It was found that there was a significant increase in body weight among DIO mice, however, the food intake showed no difference compared to control mice fed a normal diet (CTR). The number of offspring in DIO mice decreased, but there was no significant difference from the CTR group. The levels of follicle-stimulating hormone were lower in DIO mice and their luteinizing hormone levels were similar. The results showed a remarkable decrease in sperm density and motility among DIO mice. We also found that fat accumulation affected the meiosis process, mainly reflected in the cross-exchange of homologous chromosomes. In addition, overweight increased fat deposition in the testis and reduced the expression of testosterone synthesis-related enzymes, thereby affecting the synthesis and secretion of testosterone by testicular Leydig cells. Conclusion: Fat accumulation in the testes causes testicular cell dysfunction, which affects testosterone hormone synthesis and ultimately affects sperm formation.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.60 no.3
• /
• pp.217-227
• /
• 2024

To analyse and review the fishing performance and species composition according to the size of the entrance and mesh of the pot in the southern coastal waters (Tongyeong, Gyeongsangnam-do and Yeosu, Jeollanam-do), the experiment in this study caught one class, eight orders, 17 families, 23 species, 662 fishes, and 99,833 g. The largest number of fish species was Conger myriaster (301 fishes caught) accounting for 45.5%, followed by Octopus vulgaris (152) accounting for 23.0%, Charybdis japonica (45) accounting for 6.8%, Sebastiscus marmoratus (43) accounting for 6.5%, and Parapercis sexfasciata (42) accounting for 6.3%. Conger myriaster, Octopus vulgaris, Charybdis japonica, Sebastiscus marmoratus, and Parapercis sexfasciata accounted for 88.1% of the total catch. For other fish species, 68 fishes of 18 species were caught, accounting for 12.5% of the total. As a result of the total catch survey, the catch rate of Conger myriaster was the highest at 50.9% in B. 22 mm/280 mm. In addition, the average total length per fish increased as the entrance size increased. The weight ratios of Conger myriaster, Octopus vulgaris, and other fish species based on the total weight caught in each pots of the six species of test fishing gear are as follows. A pots 66.6%, 26.5%, 6.9%, B pots 57.2%, 24.5 %, 18.3%, C pots 43.2%, 31.5%, 25.3%, D pots 7.4%, 56.7%, 35.9%, E pots 43.6%, 0%, 56.4%, and F pots 5.0%, 79.6%, 15.4%.

• Korean Circulation Journal
• /
• v.54 no.3
• /
• pp.140-153
• /
• 2024

Background and Objectives: Although a single-lead electrocardiogram (ECG) patch may provide advantages for detecting arrhythmias in outpatient settings owing to user convenience, its comparative effectiveness for real-time telemonitoring in inpatient settings remains unclear. We aimed to compare a novel telemonitoring system using a single-lead ECG patch with a conventional telemonitoring system in an inpatient setting. Methods: This was a single-center, prospective cohort study. Patients admitted to the cardiology unit for arrhythmia treatment who required a wireless ECG telemonitoring system were enrolled. A single-lead ECG patch and conventional telemetry were applied simultaneously in hospitalized patients for over 24 hours for real-time telemonitoring. The basic ECG parameters, arrhythmia episodes, and signal loss or noise were compared between the 2 systems. Results: Eighty participants (mean age 62±10 years, 76.3% male) were enrolled. The three most common indications for ECG telemonitoring were atrial fibrillation (66.3%), sick sinus syndrome (12.5%), and atrioventricular block (10.0%). The intra-class correlation coefficients for detecting the number of total beats, atrial and ventricular premature complexes, maximal, average, and minimal heart rates, and pauses were all over 0.9 with p values for reliability <0.001. Compared to a conventional system, a novel system demonstrated significantly lower signal noise (median 0.3% [0.1-1.6%] vs. 2.4% [1.4-3.7%], p<0.001) and fewer episodes of signal loss (median 22 [2-53] vs. 64 [22-112] episodes, p=0.002). Conclusions: The novel telemonitoring system using a single-lead ECG patch offers performance comparable to that of a conventional system while significantly reducing signal loss and noise.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.66 no.5
• /
• pp.29-40
• /
• 2024

Most agricultural reservoirs were built between the 1940s and 1970s. Therefore, it is necessary to evaluate the current water supply safety, considering changes in water capacity, the water management, and environment in relation to the passage of time.. The design frequency of drought, the number of years areservoir needs to be able to withstand a drought phenomenon, foragricultural water resources in Korea is the 10-year drought. As the water supply system and water supply patterns change, it is necessary to establish a concept of water supply reliability, which refers to the stability of water supply. This study evaluated the water supply reliability of agricultural reservoirs based on the designed frequency. The previously designed frequency and water balance analysis were used to calculate and analyze reservoir storage capacity, water supply turnover, water supply amount, water supply potential, water utilization safety, and water supply reliability. As a result, Yongmyeon Reservoir was found to be stable in terms of water supply reliability, whereas Seongho and Yongpung Reservoirs were found to be unstable using all methods. In particular, when converting the water utilization safety and the water supply reliability to the frequency of drought, Seongho and Yongpung Reservoir were in the lowest class, with a frequency of drought less than four years. Thus, we recommend that the consideration of water supply reliability be included in the preparation of adaptive measures and water supply strategies as changes in environmental conditions continue to develop.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.1
• /
• pp.98-106
• /
• 2009

This work proposes a 1280-RGB $\times$ 800-Dot 70.78mW 0.l3um CMOS LCD driver IC (LDI) for high-performance 16M-color low temperature poly silicon (LTPS) thin film transistor liquid crystal display (TFT-LCD) systems such as ultra mobile PC (UMPC) and mobile applications simultaneously requiring high resolution, low power, and small size at high speed. The proposed LDI optimizes power consumption and chip area at high resolution based on a resistor-string based architecture. The single column driver employing a 1:12 MUX architecture drives 12 channels simultaneously to minimize chip area. The implemented class-AB amplifier achieves a rail-to-rail operation with high gain and low power while minimizing the effect of offset and output deviations for high definition. The supply- and temperature-insensitive current reference is implemented on chip with a small number of MOS transistors. A slew enhancement technique applicable to next-generation source drivers, not implemented on this prototype chip, is proposed to reduce power consumption further. The prototype LDI implemented in a 0.13um CMOS technology demonstrates a measured settling time of source driver amplifiers within 1.016us and 1.072us during high-to-low and low-to-high transitions, respectively. The output voltage of source drivers shows a maximum deviation of 11mV. The LDI with an active die area of $12,203um{\times}1500um$ consumes 70.78mW at 1.5V/5.5V.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.2
• /
• pp.141-149
• /
• 2018

In this study, compacting, passing performance, segregation resistance and rheological properties were tested to improve the stability of fresh concrete in the production and construction of self-compacting concrete (SCC) using hollow glass powder(GB). As a result, T50 reaching time was shortened up to amount of GB $2.0kg/m^3$. The compacting according to the amount of GB was improved by ball bearing effect of GB. However, T50 reaching time was slightly increased at $4.0kg/m^3$. In the case of passing performance, the result showed that plain was Class 1, GB $0.5{\sim}2.0kg/m^3$ was Class 0, GB $4.0kg/m^3$ was Class 1. Therefore, the passing performance was improved with 'No blocking' up to amount of GB $2.0kg/m^3$. Passing performance Block step (PJ) number by J-ring method was also best at GB $1.0kg/m^3$. In the case of segregation resistance according to the amount of GB, dynamic segregation resistance was increased compared to plain regardless of the amount of GB. And static segregation resistance showed 2.5% of segregation rate at GB $1.0kg/m^3$. Therefore, it was greatly improved compared to plain (12.5%). In the case of rheology property according to the amount of GB, plastic consistency by increasing of GB content didn't show big difference. However, yield stress by increasing of GB content was decreased with GB $1.0kg/m^3$. In conclusion, GB $1.0kg/m^3$ was effective for improvement of compacting, passing performance and yield stress. Also, it will be useful for stability of SCC by improving segregation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.3
• /
• pp.467-491
• /
• 1995

In order to analyze the occlusin of intercuspation with maximun bite force, fifteen healthy adult subjects with the ages 23 to 27 were studied(Group1 ; 5-normal occlusion with Angle's Class1, Group2 ; 5-Angle's Class2 malocclusion, Group3 ; 5-Angle’s Class3 malocclusion). Head Position was fixed with occlusal plane paralleling to horizontal line and occlusal registration r cord was made with polyether rubber impression material(Ramitec, ESPECo. West Germany). After all subject were trained for maximum intercuspation at least 5 times, occlusal registration procedure was repeated for this study. Lower posterior rubber occlusal registration records were sliced with 1mm thickness using precision metal sliding channel(Hitachi Ind. Co., Japan). Gross sectional drawings were traced from occluding view of upper and lower posterior teeth on the rubber slices using digitizer, and superimposed for the determination of each drawing distance(Superimposed Rubber Pattern Method). Based on superimposed rubber pattern drawings, total area of occlusal view, sum of each area of the 5 divided occlusal contact provinces and its ratio, total area and number of occlusal contact area were determined to elucidate occlusal stability in the normal and abnormal occlusion groups. The data were analysed by t-test(p=0.05) to determine statistical significance. The obtained results were as follows : 1. Group1 showed the largest standard area with occlusal view of the lower posterior teeth and Group3 showed the smallest area. There was a significant difference between Group2 and Group3(p=0.025), and Gropu1 was not statistically different for both Group2 and Group3. 2. Means and ratio of the under 2.0mm area(D) and ratio showed $197.49mm^2$, 59.76% in Group1, $188,69mm^2$, 56.10% in Group2, and $174.23mm^2$, 55.76% in Group3. The results that Group1 has the most area/ratio and Group3 has the least area/ratio can be considered Group1 is the most advantageous for masticatory effective area, and Group3 is the least adnantageous. 3. Means and ratio of the under 1.0mm area(C) were $198.96mm^2$, 42.65% in Group1, 123.06$mm^2$, 46.58% in Group2, and $92.24mm^2$, 29.52% in Group3. These data means that Group1 is the most advantageous in terms of masticatory effective area and Group3 is the least. 4. Means and ratio of the under 0.5mm area(B) were $86.68mm^2$, 26.68% in Group1, $62.98mm^2$, 18.71% in Group2, and $36.44mm^2$, 11.66% in Group3. These can also be considered Group1 is the most advantageous for masticatory effective area and occlusal stability. 5. Means and ratio of the under 0.05mm area(A) were $30.92mm^2$, 9.21% in Group1, $14.31mm^2$, 4.25% in Group2, and $7.59mm^2$, 2.43% in Group3. The area ratio of the each subject group was(4.1) : (1.9) : (1)and the data of the under 0.05mm area has the intimate relationship with inter-group and intra-group data/ratio. 6. First molar showed the most occlusal contact points in all subject group and Group1 showed somewhat uniformly distributed occlusal contact point except first premolar. In Group2, all contact point in posterior teeth showed significantly reduced distribution except first molar. Group3 showed evenly distributed contace points in first and second molars.