• Journal of Ecology and Environment
• /
• v.44 no.1
• /
• pp.45-53
• /
• 2020

Background: The black soldier fly (Hermetia illucens) is gaining attention as an efficient decomposer of food waste. However, recalcitrant compounds such as plastics mixed into food waste may have negative effects on its growth and survival. Moreover, its efficiency of food waste degradation may also be affected by plastics. In addition, salt (NaCl) can also be present in high concentrations, which also reduces the efficiency of H. illucens-mediated food waste treatment. In this study, we assessed the growth of black soldier fly larvae (BSFL) reared on food waste containing polyethylene (PE) and polystyrene (PS) and NaCl. The weight of BSFL was measured every 2-4 days. Survival and substrate reduction rates and pupation ratio were determined at the end of the experiment. Results: The total larval weight of Hermetia illucens reared on food waste containing PS was greater than that of the control on days 20 and 24. However, the survival rate was lower in the group treated with 5% PS, as was substrate reduction in all PS-treated groups. The weight of BSFL reared on food waste containing PE was lower than that of the control on day 6. PE in food waste did not affect the survival rate, but the pupation ratio increased and substrate consumption decreased with increasing PE concentrations. Regardless of the plastic type, the addition of NaCl resulted in decreased larval weight and pupation ratio. Conclusions: Larval growth of black soldier fly was inhibited not by plastics but by substrate salinity. Additional safety assessments of larvae reared on food waste containing impurities are needed to enable wider application of BSFL in vermicomposting.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.2
• /
• pp.117-124
• /
• 2017

Densities of molten salt mixtures of eutectic LiCl-KCl with $UCl_3$, $CeCl_3$, or $LaCl_3$ at various concentrations (up to 13 wt%) were measured using a liquid surface displacement probe. Linear relationships between the mixture density and the concentration of the added salt were observed. For $LaCl_3$ and $CeCl_3$, the measured densities were significantly higher than those previously reported from Archimedes' method. In the case of $LiCl-KCl-UCl_3$, the data fit the ideal mixture density model very well. For the other salts, the measured densities exceeded the ideal model prediction by about 2%.

• Journal of the Korean Ceramic Society
• /
• v.37 no.8
• /
• pp.768-773
• /
• 2000

Alnite clinker, which is based on CaO-SiO2-CaCl2 system, was synthesized by recycling Cl-containing waste, and its hydraulic properties were onvestigated. Alinite coinkers with two different chemical compositions were burned for 10∼30 minutes in the range of temperature, 1350∼1450$^{\circ}C$. The microstructures of those clinkers were characterized by powder X-ray diiffracuion analysis, optical microscope, and scanning electronic microscope and heat of hydration of alinite cements which was measured in order to investigate hydraulic properties. X-ray analysis shwoed that f-CaO in both clinkers with different compositions significantly was decreased with transforming C2S(belite) to C3S(alite). From the results of microscopy and scanning electron microscopy(SEM), crystal of synthesized alite(C3S) was larger and better crystallinity than that of ordinary portland cement.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.1
• /
• pp.83-90
• /
• 2017

The pyroprocessing of spent nuclear fuel generates LiCl-KCl eutectic waste salt containing radioactive rare earth nuclides. It is necessary to develop a simple process for the treatment of LiCl-KCl eutectic waste in a hot-cell facility. In this study, capture and solidification of a rare earth nuclide (Nd) in LiCl-KCl eutectic salt using an inorganic composite with a $Li_2O-Al_2O_3-SiO_2-B_2O_3$ system was conducted to simplify the existing separation and solidification process of rare earth nuclides in LiCl-KCl eutectic waste salt from the pyroprocessing of spent nuclear fuel. More than 98wt% of Nd in LiCl-KCl eutectic salt was captured when the mass ratio of the composite was 0.67 over $NdCl_3$ in the eutectic salt. The content of $Nd_2O_3$ in the Nd captured-composite reached about 50wt%, and this composite was directly fabricated into a homogeneous and chemical resistant glass waste in a monolithic form. These results will be utilized in designing a process to simplify the existing separation and solidification process.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2018.05a
• /
• pp.53-54
• /
• 2018

U/RE was electrochemically recovered to LCC at $50mA/cm^2$ from LiCl-KCl salt containing $0.5wt%UCl_3$, $0.22wt%NdCl_3$, 0.15wt%$CeCl_3$ and $0.07wt%LaCl_3$. The Cd in the LCC deposit was removed during the distillation using Cd distiller. U/RE product of 107g obtained from the distiller was installed to TG and then heated to $1200^{\circ}C$ to be consolidated. Dense U/RE metal ingot was not acquired through the consolidation process because U/RE product had been partially already oxidized during the distillation process.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.4
• /
• pp.5-13
• /
• 2019

This study was conducted to investigate the application effects of dried food waste powder (FWP) and mixtures of FWP and organic fertilizer (MFOs) on the growth of lettuce and Chinese cabbage. The physicochemical properties of FWP and MFOs were analyzed. As FWPs containing 3.11% NaCl was applied at 250 kg, 500 kg and 1,000 kg per 10a, growth factors of lettuce and Chinese cabbage, such as a number of leaf, leaf length, leaf width, and dry weight were decreased than those of control appling organic fertilizer. The higher the FWP ratio in the MFOs, the lower the concentrations of N and P₂O₅ in the MFOs, while the higher the concentration of NaCl. As compared to dry weight of control after treating MFOs, lettuce were not significant in MFOs treatments containing 10~30% FWP, and Chinese cabbage in MFOs treatment containing 10% FWP.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.11 no.4
• /
• pp.325-332
• /
• 2013

Pyroporcessing of spent nuclear fuel generates a considerable amount of LiCl-KCl eutectic waste salt containing radioactive rare earth (RE) chlorides. In this study, a series of processes, which consist of a phosphorylation/distillation process and a solidification process, were performed to minimize volume of the LiCl-KCl eutectic waste salt and solidify a residual waste into a stable form at a relatively low temperature. Over 99wt% of RE chlorides in LiCl-KCl eutectic salt was converted and separated into $REPO_4$ in the phosphorylation/distillation process using a mixture of $Li_3PO_4-K_3PO_4$. The separated $REPO_4$ was solidified into a homogeneous and fine-grained form at $1,050^{\circ}C$ using LIP(Lead Iron Phosphate) as a solidification agent. The final waste volume was reduced below about 10% through the series of the processes.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.4 no.2
• /
• pp.1-9
• /
• 1996

The possibility of using waste brine and cabbage waste from kimchi industry as raw materials for the production of yeast cell mass was investigated. Among four strains of osmotolerant yeast, Candida guilliermondii ATCC 6260 showed the best growth in the waste brine containing about 1.0g/L of reducing sugar and 7% to 12% of NaCl. The growth of C. guilliermondii in waste brine was affected slightly between the temperature range of $25^{\circ}C$ to $35^{\circ}C$ and the initial pH of 3 to 6. The NaCl concentration up to 9% was not inhibitory to the growth of C. guilliermondii and the addition of 10mM of ammonium salts or 5mM of potassium phosphate had no effect on the growth. The growth of yeast reduced BOD of the waste brine by 85% within 24hours. When C. guilliermondii was cultured in waste brine added with cabbage juice extracted from waste cabbage, the cell mass was increased significantly.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.21 no.1
• /
• pp.55-64
• /
• 2023

There is a gap in our understanding of the behavior of fused and molten fuel salts containing unavoidable contamination, such as those due to fabrication, handling, or storage. Therefore, this work used calorimetry to investigate the change in liquidus temperature of PuCl₃, having an unknown purity and that had been in storage for several decades. Further research was performed by additions of NaCl, making several compositions within the binary system, and summarizing the resulting changes, if any, to the phase diagram. The melting temperature of the PuCl₃ was determined to be 746.5℃, approximately 20℃ lower than literature reported values, most likely due to an excess of Pu metal in the PuCl₃ either due to the presence of metallic plutonium remaining from incomplete chlorination or due to the solubility of Pu in PuCl₃. From the melting temperature, it was determined that the PuCl₃ contained between 5.9 to 6.2mol% Pu metal. Analysis of the NaCl-PuCl₃ samples showed that using the Pu rich PuCl₃ resulted in significant changes to the NaCl-PuCl₃ phase diagram. Most notably an unreported phase transition occurring at approximately 406℃ and a new eutectic composition of 52.7mol% NaCl-38.7mol% PuCl₃-2.5mol% Pu which melted at 449.3℃. Additionally, an increase in the liquidus temperatures was seen for NaCl rich compositions while lower liquidus temperatures were seen for PuCl₃ rich compositions. It can therefore be concluded that changes will occur in the NaCl-PuCl₃ binary system when using PuCl₃ with excess Pu metal. However, melting temperature analysis can provide valuable insight into the composition of the PuCl₃ and therefore the NaCl-PuCl₃ system.

• Nuclear Engineering and Technology
• /
• v.53 no.9
• /
• pp.2926-2936
• /
• 2021

Rare-earth (RE) industries generate a massive amount of radioactive residue containing high thorium concentrations. Due to the fact that thorium is considered a non-economic element, large volume of these RE processed residues are commonly disposed of without treatment. It is essential to study an appropriate treatment that could reduce the volume of waste for final disposition. To this end, this research investigates the applicability of carbon-based adsorbent in separating thorium from aqueous phase sulphate is obtained from the cracking and leaching process of solid rare-earth by-product residue. Adsorption of thorium from the aqueous phase sulphate by carbon-based electrodes was investigated through electrosorption experiments conducted at a duration of 180 minutes with a positive potential variable range of +0.2V to +0.6V (vs. Ag/AgCl). Through this research, the specific capacity obtained was equivalent to 1.0 to 5.14 mg-Th/g-Carbon. Furthermore, electrosorption of thorium ions from aqueous phase sulphate is found to be most favorable at a higher positive potential of +0.6V (vs. Ag/AgCl). This study's findings elucidate the removal of thorium from the rare-earth residue by carbon-based electrodes and simultaneously its potential to reduce disposal waste of untreated residue.