• Computers and Concrete
• /
• v.31 no.5
• /
• pp.457-468
• /
• 2023

Buildings, bridges, and dams are examples of civil infrastructure that play an important role in public life. These structures are prone to structural variations over time as a result of external forces that might disrupt the operation of the structures, cause structural integrity issues, and raise safety concerns for the occupants. Therefore, monitoring the state of a structure, also known as structural health monitoring (SHM), is essential. Owing to the emergence of the fourth industrial revolution, next-generation sensors, such as wireless sensors, UAVs, and video cameras, have recently been utilized to improve the quality and efficiency of building forensics. This study presents a method that uses a target-based system to estimate the dynamic displacement and its corresponding dynamic properties of structures using UAV-based video. A laboratory experiment was performed to verify the tracking technique using a shaking table to excite an SDOF specimen and comparing the results between a laser distance sensor, accelerometer, and fixed camera. Then a field test was conducted to validate the proposed framework. One target marker is placed on the specimen, and another marker is attached to the ground, which serves as a stationary reference to account for the undesired UAV movement. The results from the UAV and stationary camera displayed a root mean square (RMS) error of 2.02% for the displacement, and after post-processing the displacement data using an OMA method, the identified natural frequency and damping ratio showed significant accuracy and similarities. The findings illustrate the capabilities and reliabilities of the methodology using UAV to evaluate the dynamic properties of structures.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.3
• /
• pp.139-147
• /
• 2018

This study starts with the consciousness of what should be the public pension service that meets the 4th Industrial Revolution era. To do this, we review the current status of non-facing services of domestic and foreign public institutions, and draw out implications for revitalizing non-facing services of the National Pension over the medium to long term. First, we reviewed the status of non-face-to-face service and the authentication method of the National Pension Service. Next, we reviewed the status of non-facing services in public pension and private agencies in the United States, the United Kingdom, Canada, and Australia. Based on the results of the analysis, we needs to analyze the impact of the 4th Industrial Revolution on the National Pension Service and extract future strategies, to expand channels of non-facing by business, to introduce PinTech as a non-facing authentication method, and to propose a unified service channel through the construction of an internet integrated portal. In the 4th industrial revolution era, it is possible to secure the connectivity of government portal for civil affairs and intelligence and automation introducing artificial intelligence robots.

• The Journal of the Korea Contents Association
• /
• v.19 no.6
• /
• pp.491-503
• /
• 2019

In commemoration of the centennial anniversary of the March 1 movement in 2019, the research looked at the significance and influence of the March 1 movement on Korean history and highlighted what the church of the 4th Industrial Revolution era should play. The meaning of the March 1 movements to modern society has been identified as follows. First, the Church needs a clear sense of responsibility for society. Second, there is a need for attention to the next generation, the existing future. Third, practical education is needed for young people. Fourth, what is as important as a dreams is the value in it. Focusing on these facts, the study suggested what modern church roles should be like in the era of the Fourth Industrial Revolution. First, the church should attempt a missional approach that emphasizes the sense of belonging. Second, education for the next generation, called the Z generation, is paramount. Third, the church of the new era should be the leader of the civil society movement. Fourth, efforts are needed to realize the identity of the church. So the Church of the Fourth Industrial Revolution era should be a more missional community that reveals the kingdom of God in everyday life.

• Fashion & Textile Research Journal
• /
• v.16 no.5
• /
• pp.706-718
• /
• 2014

Ideology which symbolizes the belief system about the order of human society represents itself in a concrete form through dress which reflects material and conceptual world. In the early 1960s Korea, where a civil revolution and a military coup took place, good examples of dress representing ideology could be found. This study investigates the dress representing ideology of the period, and examines its manifestation and aspect of transition. Literature survey and case study were conducted. The following results were obtained: First, dress representing ideology was symbolically verifying its differences and was changing with the course of time. There were the flow going down from the government, and the flow going up from the movement of the civilian. Through this process, design elements of ideological dress were combined in a dialectic way to form a new representational dress such as Jaegunbok. Second, costly and luxurious clothes meant a tool to rule over people, and the opposition was uniform meaning equality. In 1960 Korea, black waves of school uniforms appeared to lead the social change. A year later, the military government seized power in a 5.16 coup and it enforced uniform upon every people to achieve equal austerity and modernized spirit. Lastly, cotton, which was originated from Gandhi's movement in India, was symbolizing nationalism till the early 1960s in Korea meaning the funding own development with own resources.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.809-814
• /
• 2009

Deep mixing method has been used for ground improvement and foundation system for embankment, port and harbor foundations, retaining wall, and liquefaction mitigations. It has attractive benefits because it is not only improved strength of soft ground but superior for prevention of settlement. However, the quality controls of improved mass affect to the efficiency of the deep mixing method is not properly established. These effects vary depending upon the construction environments and conditions of agitation in consideration of an agitator. The strength and shape of the improved column are not unique and these are affected by mechanical properties of agitators. In this study, in order to investigate the efficiency of deep mixing method for ground improvement on a soft clay ground, experimental studies are performed considering mechanical properties of agitator; the location of exit-hole of admixtures, an angle of mixing wing and a speed of revolution. The experiments are conducted with the simulated apparatus for deep mixing plant that reduced the scale in 1:8 of the real plant. According to the results, the diameter and shape of improved column mass vary depending on the mechanical properties and operating conditions of agitator. Its quality is better when the exit-hole of admixtures is located in the mixing wing, when an angle of mixing wing is large, and when the speed of revolution is rapid.

• Structural Engineering and Mechanics
• /
• v.19 no.3
• /
• pp.321-336
• /
• 2005

The structural feasibility of a variety of non-conventional sludge digesters, in the form of thin shells of revolution constructed in concrete, has formed the subject of investigation of a recent programme of research at the University of Cape Town. Such forms are usually known in the literature as "egg-shaped", and the advantages of these over conventional digesters of the wide-cylindrical type are now well-recognised: superior mixing efficiency, less accumulation of deposits at the bottom, easier removal of bottom deposits and surface crust, reduced heat losses, and so forth. With the aim of exploring the structural feasibility of various non-conventional forms for concrete sludge digesters, and making available usable analytical data and practical guidelines for the design of such thin shell structures, a number of theoretical studies have recently been undertaken, and these have covered conical assemblies, spherical assemblies and parabolic ogival configurations. The purpose of the present paper is to bring together the different analytical approaches employed in each of these studies, summarise the main findings in each case, draw comparisons among the various studied configurations with regard to structural efficiency and functional suitability, and make appropriate conclusions and recommendations.

• Journal of Korean Association for Spatial Structures
• /
• v.20 no.1
• /
• pp.61-67
• /
• 2020

In the era of the Fourth Industrial Revolution, Various attempts are being made to converge new industries with IT industry to find new growth engines in the field of IT, maximizing efficiency in terms of productivity. 3D printers are also related to this, and various studies have been conducted worldwide to utilize them in the construction industry. At present, there is an active effort to study atypical structures using 3D printers. The most widely used method is the use of glass panels, however, the additional cost of the manufacturing process and thus the overall project cost cannot be ignored. In addition, the construction of the curvature of the existing two-way curved surface in the conventional flat joint method is not suitable for implementing an amorphous shape. In this paper, we propose an optimized shape through Abaqus analysis of various shapes of Space Truss interior using 3D printing technology using polymer.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.2
• /
• pp.125-135
• /
• 2019

In recent years, the digital transformation age represented by the "Fourth Industrial Revolution", which is a universalization of digitalization across all industries, has become a reality. In the construction sector in 2018, the Ministry of Land, Infrastructure and Transport established the Smart Construction 2025 vision and established the 'Smart Construction Technology Roadmap' aiming to complete construction automation by 2030. Especially, in the construction stage, field monitoring technology using drones is needed to support construction equipment automation and on-site control, and a 3D geospatial information model can be utilized as a base tool for this. The purpose of this study is to investigate the factors affecting earthworks work in order to manage changes in site conditions and improve communication between managers and workers in the earthworks plan, which has a considerable part in terms of construction time and cost as a single type of work. Based on this, field management procedures and applications were developed.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.12
• /
• pp.51-57
• /
• 2021

Underground lifelines such as water supply/sewer pipe, power cable and gas pipe are indispensable facilities to the life of urban society. These lifelines have been constructed long time ago and buried positioning information is not precisely recorded. Moreover, they have been concentrated on the narrow area and are complicatedly entangled in 3-dimension. In the fourth industrial revolution, a 3-dimensional visualization for underground lifelines is strongly required, and a database (D/B) with precise positioning information should be preceded. In this study, image processing technology for precise positioning of underground buried lifelines is introduced, which is able to build the database more accurately, efficiently and practically.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.207-212
• /
• 2017

Korean civil airworthiness requirements of powerplant system are regulated on KAS Part 23 and Part 33. These are equivalent to FAR Part 23, Part 33 of FAA and CS-23, CS-E of EASA. FAA and EASA rewrites entire airworthiness requirements for the small airplane. It changed current 'prescriptive regulation' into 'performance-based regulation' which makes the object of safety performance. Powerplant requirements are also changed extensively by these concept revolution. In accordance with reorganization, we studied new powerplant system requirements of FAR Part 23 and proposed ideal direction to rewrite of Korean Airworthiness Standard rewrite.