• Journal of Welding and Joining
• /
• 제30권5호
• /
• pp.13-15
• /
• 2012

Stainless steels is widely used in various industries due to its high strength and excellent corrosion resistance. However, in the case of fusion welding for stainless steel, chromium deficiency layer produced by chromium carbide precipitation during welding process causes corrosion-resistance to be lower and formation of intergranular corrosion. It requires a inevitable complex procedure such as pre-heating and post-heating process etc. to prevent such weld defects. From this viewpoint, the new welding process such as a solid state welding method is suited for welding of stainless steels due to its advantages over the fusion welding. Therefore this paper intends to investigate the research trend on friction stir welding, one of solid state welding processes for stainless steels.

• 대한환경공학회지
• /
• 제30권5호
• /
• pp.524-533
• /
• 2008

도금산업에서 배출되는 폐수는 독성이 강한 시안이온과 시안착화합물, 그리고 다양한 중금속이 함유되어 있다. 이러한 독성이 강한 시안이온 및 시안 착화합물의 처리는 알칼리염소법에 의한 시안 산화처리방법이 가장 일반적으로 잘 알려진 방법이다. 이는 시안이온은 분해 가능하나 시안 착화합물의 처리는 어려운 것으로 알려져 있고, 실제로 산업현장에서 수질환경보전법상 수질배출허용기준(나 지역) 1 mg/L을 초과하는 경우가 빈번하다. 본 연구에서는 앞서 밝힌 아연백법 및 공침공정을 이용한 복합 중금속-시안착염 폐수의 현장처리(I) (아래에서 "현장처리(I)"으로 표시 함)과 비교하여 크롬환원처리 후 Fe/Zn 공침공정을 적용하여 시안착염을 제거하고, 알칼리염소법에 의한 잔류시안 산화처리방법으로 검토하였다. 크롬처리는 6가 크롬을 3가 크롬으로 환원시 환원제로서 NaHSO$_3$를 사용하여 pH 2.0, ORP 250 mV, 반응시간 30 min.에서 99.9% 이상의 최대제거율을 얻을 수 있었다. Fe/Zn 공침에 의한 시안착염 제거실험은 pH 9.5, FeSO$_4$/ZnCl$_2$ 3.0 $\times$ 10$^{-4}$ mol, mixing rpm 240에서 시안이온의 제거효율은 98.24%(잔류시안농도: 4.50 mg/L)로 최대의 결과를 얻었다. 황화물 침전법에 의한 기타중금속(Cu, Ni)처리반응의 조건은 pH 9.0$\sim$10.0, 반응시간 30 min. mixing rpm 240에서 Cu의 경우 Na$_2$S 주입량 3.0 mol에서 99.9%, Ni의 경우 Na$_2$S 4.0 mol에서 93.86%의 최대결과를 얻었다. Fe/Zn공침처리 후 잔류시안농도 4.50 mg/L의 제거를 위하여 알칼리염소법을 실시한 결과 1차 산화반응은 pH 10.0 이상, ORP 350 mV, reaction time 30 min, 2차 산화반응은 pH 8.0 이하, ORP 650 mV, 반응시간 30 min.에서 제거효율 95.33%, 잔류시안농도 0.21 mg/L의 결과를 얻었다. 즉 (1) 크롬환원처리, (2) Fe/Zn 공침공정에 의한 시안착화합물 제거 및 기타 중금속(Cu, Ni) 처리, (3) 알칼리염소법에 의한 잔류시안 산화처리를 실시한 결과(아래에서 "현장처리(II)"로 표시 함) 시안의 잔류농도는 0.21 mg/L로서 수질 및 수생태계보전에 관한 법율의 수질배출허용기준(나 지역) 1 mg/L의 규제치 이하로 처리가 가능하다는 것을 현장 확인할 수 있었고 "현장처리(I)"보다 처리효율적인 측면이나 경제적인 측면에서 모두 양호한 결과를 얻을 수 있었다.

• 대한화학회지
• /
• 제33권1호
• /
• pp.106-112
• /
• 1989

Tetralin의 액상 공기 산화반응에 N,N-dialkylamide 용매하에서 Cr(Ⅵ)의 heterocyclic base염들과 CrO$_3$-N,N-dialkylamide complex계를 적용한 결과 CrO$_3$-N,N-dialkylamide complex의 경우, 반응온도 90$^{\circ}$C에서 tetralin의 전환율이 35.2%이었고, ${\alpha}$-tetralone의 선택율은 96.1%이었으며, ${\alpha}$-tetralol은 무시할만한 양으로 생성되었다.

• 환경영향평가
• /
• 제8권2호
• /
• pp.1-8
• /
• 1999

The research centers on the concentration profile and risk assessment of toxic metals for ambient air in Taejon industrial complex. Airborne concentrations of each toxic metal for risk assessment were obtained from 2-year sampling by high volume air sampler and analysis by ICP-MS and ICP-AES in the complex. The long-term arithmetic mean of human carcinogen, arsenic, hexavalent chromium and nickel subsulfide was 5.53, 2.16 and $3.46ng/m^3$ while the mean of probable human carcinogen, beryllium, cadmium and lead was 0.08, 2.35, $293.29ng/m^3$, respectively. And the long-term arithmetic mean concentration of non-carcinogenic metal, manganese was $55.91ng/m^3$. The point risk estimate for the inhalation of carcinogenic metals was $3.6{\times}10^{-5}$, which was higher than a risk standard of $10^{-5}$. About 75% of the cancer risk was to the inhalation of human carcinogen, arsenic. Thus, it is necessary to properly manage arsenic risk in Taejon industrial complex. The point hazard index by the inhalation of manganese was 1.1. Therefore, an investigation into Taejon industrial complex is needed to obtain more fine long-term concentration data for airborne non-carcinogenic metals including manganese.

• 한국환경과학회지
• /
• 제24권10호
• /
• pp.1253-1264
• /
• 2015

This study assessed the fertilizing value of struvite deposit recovered from swine wastewater in cultivating Chinese cabbage. Struvite deposit was compared with commercial fertilizers: complex, organic and compost to evaluate the fertilizing effect of struvite deposit. Laboratory pot test obviously presented that the struvite deposit more facilitated the growth of Chinese cabbage than organic and compost fertilizers even though complex fertilizer was the most effective in growing Chinese cabbage. It was revealed that the growth rate of Chinese cabbage was simultaneously controlled by phosphorus (P) and potassium (K). Also, the nutrients such as nitrogen (N), P, K, calcium (Ca) and magnesium (Mg) were abundantly observed in the vegetable tissue of struvite pot. Specifically, P was the most abundant component in the vegetable tissue of struvite pot. Meanwhile, the utilization of struvite as a fertilizer led to the lower accumulation of chromium ($Cr^{6+}$) than other pots, except for compost fertilizer pots, and no detection of cadmium (Cd), arsenic (As) and nickel (Ni) in the Chinese cabbage. The experimental results proved that the optimum struvite dosage for the cultivation of Chinese cabbage was 2.0 g struvite/kg soil. On the basis of these findings, it was concluded that the struvite deposits recovered from swine wastewater were effective as a multi-nutrient fertilizer for Chinese cabbage cultivation.

• 한국환경과학회지
• /
• 제15권3호
• /
• pp.221-227
• /
• 2006

Oxidative TCE decomposition over $TiO_2$-supported single and complex metal oxide catalysts has been conducted using a continuous flow type fixed-bed reactor system. Different types of commercial $TiO_2$ were used for obtaining the supported catalysts via an incipient wetness technique. Among a variety of titanias and metal oxides used, a DT51D $TiO_2\;and\;CrO_x$ would be the respective promising support and active ingredient for the oxidative TCE decomposition. The $TiO_2-based\;CrO_x$ catalyst gave a significant dependence of the catalytic activity in TCE oxidation reaction on the metal loadings. The use of high $CrO_x$ contents for preparing $CrO_x/TiO_2$ catalysts might produce $Cr_2O_3$ crystallites on the surface of $TiO_2$, thereby decreasing catalytic performance in the oxidative decomposition at low reaction temperatures. Supported $CrO_x$-based bimetallic oxide systems offered a very useful approach to lower the $CrO_x$ amounts without any loss in their catalytic activity for the catalytic TCE oxidation and to minimize the formation of Cl-containing organic products in the course of the catalytic reaction.

• Environmental Engineering Research
• /
• 제21권1호
• /
• pp.29-35
• /
• 2016

This study evaluated the fertilizing value of struvite deposit recovered from swine wastewater in cultivating lettuce. Struvite deposit was compared to complex fertilizer, organic fertilizer and compost to evaluate the fertilizing effect of struvite deposit. Laboratory pot test showed that the struvite deposit better enhanced lettuce growth in comparison to commercial fertilizers. It was revealed that the growth rate of lettuce was simultaneously controlled by phosphorus (P) and magnesium (Mg). Moreover, nutrients such as nitrogen (N), P, K, calcium (Ca) and magnesium (Mg) were abundantly observed in the vegetable tissue of struvite pot. Meanwhile, struvite application led to the lower accumulation of mercury (Hg), lead (Pb), chromium ($Cr^{6+}$) and nickel (Ni). In addition, no detection of cadmium (Cd), arsenic (As) and nickel (Ni) in the lettuce tissue was observed in struvite application pots. The experimental results proved that the optimum struvite dosage for lettuce cultivation was 0.5 g struvite/kg soil. The column experiments clearly showed that ammonia nitrogen was more slowly released from struvite deposit than from complex fertilizer. Consequently, it was concluded that the struvite deposits recovered from swine wastewater were effective as a multi-nutrient fertilizer for lettuce cultivation.

• Current Optics and Photonics
• /
• 제7권5호
• /
• pp.569-573
• /
• 2023

We utilized terahertz time-domain spectroscopy (THz-TDS) to measure the thickness and electrical properties of nickel-chromium (Ni-Cr) films. This technique not only aligns well with traditional methods, such as haze-meter and transmission-densitometer measurements, but it also reveals the electrical properties and thickness of films down to a few tens of nanometers. The complex conductivity of the Ni-Cr thin films was extracted using the Tinkham formula. The experimental values closely aligned with the Drude model, indicating the reliability of our Ni-Cr film's electrical and optical constants. The thickness of Ni-Cr was estimated using the complex conductivity. These findings emphasize the potential of THz-TDS in quality control of metallic nanofilms, pointing toward an efficient and nondestructive test (NDT) for such analyses.

• 공업화학
• /
• 제26권3호
• /
• pp.372-376
• /
• 2015

6M HCl 용매 하에서 6-메틸퀴놀린과 chromium(VI) trioxide의 반응을 통하여 6-MQCC(크롬(VI)-6-메틸퀴놀린) 착물을 합성하였다. 적외선분광광도법(IR), 유도결합 플라즈마(ICP) 등으로 구조를 확인하였다. 여러 가지 용매 하에서 6-MQCC을 이용하여 벤질 알코올의 산화반응을 측정한 결과, 용매의 유전상수 값이 증가함에 따라 반응수율이 증가했다. 그 순서는 DMF > 아세톤 > 클로로포름 > 시클로헥센이었다. 산($H_2SO_4$) 촉매를 이용한 DMF 용매 하에서, 6-MQCC은 벤질 알코올(H)과 그의 유도체들($p-OCH_3$, $m-CH_3$, $m-OCH_3$, m-Cl, $m-NO_2$)을 효과적으로 산화시켰다. 전자받개 그룹들은 반응속도가 감소한 반면에 전자주개 치환체들은 반응속도를 증가시켰고, Hammett 반응상수(${\rho}$) 값은 -0.69 (308 K)이었다. 본 실험에서 알코올의 산화반응 과정은 속도결정단계에서 수소화 전이가 일어났다.

• 대한화학회지
• /
• 제28권2호
• /
• pp.95-101
• /
• 1984

$cis - [Cr(en)_2Cl_2]^+ $착물의 수화반응에 대한 연구를 전기전도도법에 의해. 온도는 $15^{\circ}C{\sim}30^{\circ}C$에서 압력은 $1{\sim}2000bar$의 범위에서 실시하였다. 반응속도는 온도가 증가함에 따라 증가하고, 압력이 증가하면 감소하였다. 활성화부피(${\Delta}V^{\neq}$)는 $25^{\circ}C$, 1bar에서 $1.82cm^2/mole$로 비교적 작은 양의 값을 나타내었으며, 이 값은 압력이 증가함에 따라 감소하고 온도 증가에 따라서는 증가하였다. 활성화엔트로피(${\Delta}S^{\neq}$)$는 $25^{\circ}C$, 1bar에서 -9.019 eu로 작은 음의 값을 나타내었다. 활성화파라미터의 값으로부터 수화반응의 메카니즘은 교환해리(Id)메카니즘인 것으로 밝혀졌다.