• Archives of design research
• /
• v.18 no.4 s.62
• /
• pp.73-84
• /
• 2005

The purpose of this study is to analyze the interior color characteristics of elderly housing facilities in Korea. For this purpose, a filed survey was conducted between October 16 and October 25, 2003, visiting 10 elderly housing facilities. A three step analysis of the facilities was involved. First, floor, walls, ceiling, base boards and doors in common spaces were examined for the color scheme using the 'Pantone for Fashion and Home Color Guide' for each room. Measured Pantone numbers were converted to RGB color using 'Chooser 3.0 of Pantone, Inc.' Finally, the conversions were recorded as Munsell numbers. The results are as follows. First, the brightness used in elderly housing facilities ranges from high value to low value while the chroma ranges from the middle chroma to low chroma. The warm colors of Y and YR are mainly used, followed by GY and R. Second, the colors used for elderly housing facilities are found inter-related. For example, the main color in the lobby is also used for corridor and used again in dining room, library, and treatment room. Third, in terms of the color scheme, it is best help the elderly, who generally have lower recognition capability, by highlighting the distinction and attention by using the dearly distinctive accent color for the transition space, edge of the hallways or in front of the door to the units and having different color for each floor. But in most facilities except one or two, this consideration is ignored. Fourth, there is difference in color selection between elderly housing with low and high rental value. Only one facility, the most high priced one, has aggressive color arrangement, and the others show very little consideration of the elderly's needs.

• Journal of Broadcast Engineering
• /
• v.17 no.5
• /
• pp.756-764
• /
• 2012

In current HEVC, prediction pixels are finally calculated by linear-function interpolation on two reference pixels. It is hard to expect good performance on the case of occurring large difference between two reference pixels. This paper decides more accurate prediction pixel values than current HEVC using linear function. While existing prediction process only uses two reference pixels, proposed method uses DCT-IF. DCT-IF analyses frequency characteristics of more than two reference pixels in frequency domain. And proposed method calculates prediction value adaptively by using linear-function, DCT-IF and cubic-function to decide more accurate interpolation value than to only use linear function. Cubic-function has a steep slope than linear-function. So, using cubic-function is utilized on edge in prediction unit. The complexity of encoder and decoder in HM6.0 has increased 3% and 1%, respectively. BD-rate has decreased 0.4% in luma signal Y, 0.3% in chroma signal U and 0.3% in chroma signal V in average. Through this experiment, proposed adaptive intra prediction method using DCT-IF and cubic-function shows increased performance than HM6.0.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.4
• /
• pp.7-13
• /
• 1999

The purpose of this study was to suggest the c1ata which were useful to apply the color for clothes resign 29 female university students were se10cted in this experirrental study for the perception scope of primroy color from July to Dec. in 1998. The results of this study are as the following : 1) The perception scope of red perceived by more than 30% of the subjects was wider in Chroma-axis than in Value-axis, including 5R 4/12, 5R 4/10 and 5R 5/14 in standard color 5R standard color 5R 4/14. The perception scope of yellow was wider in Chroma-axis in standard color 5Y 8/14. And the perception scope of blue was wider in Value-axis in standard color 5B 4/10. 2) In chromaticity diagram, the perception scope of red perceived by one subjoct and over was large, covering three-quarters and being extended in X -axis. The perception scope of yellow was awuximately a half, without being linked together. A few of it were separated. And the perception scope of blue was about two-thirds, including all color chips in the line. In conclusion, the perception scope of red was comprehensively broad and there aweared relatively strong corrnron feature between the subjects. The perception scq;e of yellow was awuximate1y a half and there was little cormnon feature between the subjects. And the perception sccpe of blue was sorrewhat wide and the sUbiects expressed strong cornrmn feature. feature.

• Journal of Information Technology Applications and Management
• /
• v.28 no.6
• /
• pp.69-85
• /
• 2021

In the era of the 4th Industrial Revolution, not only artificial intelligence, big data, robots, and biotechnology, but also cultural industries that require human creativity will lead. Among the cultural industries, the animation industry has high industrial utilization value due to its high connection with other industries. Among them, animation characters play the most important role as the subject leading the story of animation. In particular, the villain character not only serves as a medium for the main character to lead the story, but also captivates the audience with a different presence from the main character, adding to the fun and completeness of the animation. These characters consist of visual elements such as form and color, of which color is a tool that effectively conveys the character's personality and role to the audience, and is the first visual element to be considered in delicately describing the character's emotions and the relationship between characters. Therefore, this study attempts to analyze the color of the villain character. To this end, we will select eight Disney animations to derive the characteristics of the villain character's color by analyzing the color, value, chroma, and color association of the colors used in the Disney villain character. As a result of the analysis, the colors mainly used by Disney to convey the villain's image were red (R) and Orange (YR), and there was no difference depending on the times or animation production methods. Second, the brightness of Disney villain characters appeared to be the same medium/famous regardless of the times and production methods, and the frequency of use of high brightness was very low. In terms of saturation, the frequency of use of high and low saturation was high. Third, blackish (Bk), Strong (S), dull (Dl), and deep (Dp) tones were mainly used for tones. In particular, in recent 3D animations than previously produced 2D animations, the use of low chroma and the high black mixing rate increased. Fourth, it can be seen that Disney uses color as a visual method to more clearly express the psychology of the villain character using color association. In conclusion, the color selection of animation characters should be carefully considered as a tool to convey the character's personality, role, and emotion beyond simply using color, and the color selection of characters using color associations and symbols strengthens the narrative structure. It is hoped that this study will help analyze and select the character color of animation.

• Journal of the Korean Home Economics Association
• /
• v.45 no.10
• /
• pp.73-81
• /
• 2007

The purpose of this study was to increase the ultraviolet-light (UV)-cut ability of cellulose fabrics (cotton, ramie, and rayon) dyed with safflower yellow colorants. For this purpose, samples treated with UV-cut agent and tannic-acid were compared with the untreated samples after UV exposure in terms of K/S value, color changes(${\Delta}E$), SEM, and strength retention. The K/S value rapidly decreased after 28 days exposure, whereas the K/S value of the samples treated with both UV-cut agent and tannic-acid decreased to less than that of the untreated samples. In color changes, $L^*$ increased while $a^*$ and $b^*$ decreased, indicating less red and yellow character in color. This induced a change in the hue, value and chroma values. However the color change(${\Delta}E$) of the samples treated with both UV-cut agent and tannic-acid was less than that of the untreated samples. Scanning electron microscopy (SEM) pictures showed a severe degradation by exposure in all samples. Tensile strength rapidly decreased after 28 days for cotton and rayon, and after 21 days for ramie. However, the strength retention of the samples treated with UV-cut agent and tannic-acid was higher than that of the untreated samples.

• Fashion & Textile Research Journal
• /
• v.19 no.5
• /
• pp.646-652
• /
• 2017

In order to clarify an availability of water treatment for persimmon extract dyeing, effect of color developing by water treatment process on cotton fabrics dyed with persimmon extract was investigated. Dyed fabrics were dipped still water and circulation water in various temperature. Concerning water color developing, still water color developing and circulation water color developing have been examined, and the temperature of water has been apprehended to prepare an effective basis of water color development. The surface color based on circulation water color development displays low values of $a^{\ast}$ and $b^{\ast}$, and the range of the c value(Munsell chroma) is narrow and has the value of 2 to 3, thus displays the coloration of a dark tone. The effect of temperature in water color development was insignificant, due to the small difference in temperature from $20^{\circ}C$ to $40^{\circ}C$. At $80^{\circ}C$, remarkable color development manifested, which is evidence of the high influence of temperature. The effects of circulation were clear at low temperatures, and the effects of temperature highly manifested at high temperatures. Circulation water color development display great color development at all temperatures to allow industrial color development with the absence of sunlight, thereby having an effect of energy reduction and developing color in dark tones, however this also is a strength of persimmon extract concerning color diversification, and is judged to have great value of industrial and practical application.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.2
• /
• pp.303-314
• /
• 2002

The colors of apparel have become an important element to be used strategically in order to give differentiated character at the level of fiber and fabric production. The colors of apparel have a close relationship with the skin colors of consumers and their preference colors. This study was carried out to classify the skin colors of Korean elderly women into several similar skin colors and to analyse their preference colors. Sample size was 471 Korean elderly women. With color spectrometer, JX-777, we measured 4 points of the body; cheek with removing cosmetics off, forehead, rear neck and arm on the interior part near elbow. All subjects had been shown with 40 color chips and answered the preference colors of apparel and the preference colors. Data weirs analysed to classify skin colors using K-means Cluster Analysis and Duncan test. Independent variables for Cluster Analysis were 12 variables out of L value, a value and b value of 4 points. In doing so, we used SPSS WIN 10 statistical package. Findings were as follows: 1) The skin colors of the Korean elderly women were composed of skin colors of YR, R, and Y. 2) 355 subjects were classified into 4 kinds of skin color groups. 3) The average face color of type 1 was 6.7YR 5.1/4.3 and 56 observations out of 355 subjects were composed of Type 1 and of Type 2 was 6.1YR 6.1/4.5 and 166 observations out of 355 and of 3 Type 6. YR 4.8/4.2 and 75 observations out of 355 and of Type was 6.17 YR 5.7/4.7 and 58 observations out of 355. 4) The average skin color of Type 1 was 7.0YR 5.9/4.4 and of Type 2 was 7.2YR 6.3/4.2 and of Type 3 was 7.0YR 6.2/4.2 and of Type 4 was 7.6YR 5.4/4.2 respectively. 5) The mean values of 12 variables between the 4 classified face color and skin color groups showed significantly different except H value of skin color. 6) All 4 groups showed that the most preference color of apparel and the most preference color were 2.5R 5/14 respectively.

• Journal of the Korea Furniture Society
• /
• v.28 no.4
• /
• pp.294-304
• /
• 2017

The purpose of this study is to analyse and derive the color characteristics of childhood children's learning spaces and furniture for improving the color design of those and to present the direction of design and to build up the DB. The study covers products from domestic and overseas infant furniture manufacturers and 11 preschool learning rooms. The study method uses the collected furniture and spatial images to derive a palette of colors and compare color characteristics. The analysis results show that, the domestic infant furniture tend to use a variety of colors with pale tone or use consistent hard wood furniture according to the requirements of adult taste and marketability. Also, it attempts to create a very negative color scheme, but it looks like disorganized, and there is not much color design integrated with the architecture. Thus, color designs ensure that the ordering elements of the color scheme are clearly recognized by applying preferred color tones of childhood, like vivid and bright tone with high chroma and middle or hight Brightness value. Lastly, it should establish guidelines for specific palettes and color scheme, which can be utilized in the design of childhood children's learning spaces and furniture.

• Textile Coloration and Finishing
• /
• v.18 no.4
• /
• pp.11-19
• /
• 2006

Black-dyed PET fabrics were sputtered with stainless steel through DC-magnetron type device to investigate the possibility of coloration effect, and then considered the morphological structure and physical characteristics such as water permeation ability and washing fastness. Change in color was estimated on the basis of CIELAB color system. The color coordination of metal plated PET was shifted to yellow-red from red-blue. Colour difference$({\Delta}E^*)$ was increased by sputtering conditions with increasing ion current and treatment time. Especially, $Lightness(L^*)$ value of PET was remarkably increased by sputtering, whereas $Chroma(C^*)$ increased gradually. From SEM analysis, rough and uneven craters were found and thickened on the fiber surfaces with longer sputtering time. And washing fastness was a little poor and absorption ability slightly decreased. There were little changes of breaking load and breaking extension. It was evident that observed uneven craters in the plated thin layer resulted in the colour change of PET fabrics by sputtering treatments.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.7 no.2
• /
• pp.39-50
• /
• 2005

The purpose of this research was to investigate the impression dimension and to elucidate the image perception depending on the tone of the Korean jacket and Korean skirt using the tone-on-tone coloration. As stimulators, the became same color by making the skirt and jacket red, yellow, and green at the same time. After the skirt and jacket became four kinds of tones, vivid, light, dull, and dark by altering value and fuing chroma in the assembled color, these tone-on-tone coloration stimulators $48(3\times4\times4)$ were used for the investigation of this study. Impression factor of the stimulus consisted of the 5 different dimensions(youthfulness and activity, attractiveness, gracefulness, concentration of attention, tenderness). Among these factors, youthfulness and activity, attractiveness were proved to be more important. In the tone-on-tone coloration of a Korean skirt and a Korean jacket, each dimensional image was affected by the character of color, also the evaluation of countenance showed the meaningful difference depending on tone. Thus, we can comprehend that the influence of tone as well as color affects the evaluation of an image.