• 한국환경과학회지
• /
• 제29권11호
• /
• pp.1055-1064
• /
• 2020

In this research, heavy metals and T-P removal characteristics of plated wastewater are derived using BPC(Break Point Chlorination) process. AA sedimentation pond outflow(Influence) was evaluated for the removal efficiency of heavy metal(Ni) and T-P at a reaction time of 25 minutes by NaOCl input volume(9, 11, 13 and 15 mL). In the case, the higher the NaOCl input volumes, the higher the ORP values were maintained and the higher the removal efficiency tended to be. On the other hand, T-P was judged to have a low relationship between the ORP value and the removal efficiency. In addition, the efficiency of removal heavy metals and T-P in the plated wastewater by injecting 10 mL, 15 mL, 20 mL and 25 mL NaOCl, increased as the amount of NaOCl injected increased, the amount of NaOH input for pH increased. It was found that suspended solid in effluence also increased. It was also observed that the color of the plating wastewater changed from yellowish green to green to charcoal gray to black as the amount of NaOCl injected increased. Treatment characteristics of the reaction time, the longer the reaction time with the substance to be treated after the input of NaOCl, the more the heavy metal removal efficiency tended to increase. Through XRF analysis of the sludge, the constituents in the sludge such as NaCNO, CNCl, Na₃PO₄, CrO₄, 2Na₂CrO₄ and 2NaNO₃ will be analyzed in detail, and the mechanisms of the reaction between the plated wastewater and the complex compound will be elucidated.

• 한국물환경학회지
• /
• 제18권3호
• /
• pp.271-282
• /
• 2002

The sonochemical process has been applied as a treatment method to investigate its effect on the decomposition of humic substances (HS). The reaction kinetics and mechanisms in the process of sonochemical treatment for humic substances in wastewater have also been discussed. It was observed that the metal ions such Fe(II) and Mn(II) showed catalytic effects, while Al(III), Ca(II), and Mg(II) had inhibitory effects on the decomposition of humic substances in sonochemical reaction with hydrogen peroxide. Experimental results also showed factors such as hydrogen peroxide dose affected the formation of disinfection by-products. Two trihalomethanes, chloroform and dichlorobromomethane were formed as major disinfection by-products during chlorination. The depolymerization and the radical reaction of HS radicals appear to occur simultaneously. The final step of the reaction is the conversion of organic acids to carbon dioxide.

• 한국수자원학회논문집
• /
• 제55권spc1호
• /
• pp.1197-1210
• /
• 2022

최근 국내에서는 관로 노후화 및 다양한 수질사고 발생으로 인해 상수도 분야에 대한 관심이 급증함에 따라, 상수도 서비스에 대한 이용자들의 수질민원 또한 증가하고 있다. 수질민원의 경우 실제 수질오염뿐만 아니라 소독을 위한 잔류염소농도에 대한 불편을 포함하고 있으며, 따라서 사용자에게 공급되는 잔류염소농도를 균등하게 유지하기 위해 재염소 처리와 같은 다양한 노력이 시도되고 있다. 본 연구에서는 상수관망 내 잔류염소농도 모의를 위해 적용 대상지역의 수질반응계수를 추정하였으며, 수질기준을 만족시키는 동시에 잔류염소농도 균등화를 고려하기 위한 염소 투입 및 재투입 최적화 방법을 제안하였다. 제안된 방법은 국내 대규모 지방상수도를 대상으로 적용하였으며, 격자탐색법을 통해 다양한 염소 투입/재투입 계획을 비교 분석하고, 공급 잔류염소농도의 적합성 및 균등성을 중심으로 최적화한 결과를 제시하였다.

• 자원리싸이클링
• /
• 제27권3호
• /
• pp.30-38
• /
• 2018

본 연구는 1173 K에서 60분 동안 유지하는 조건하에 PVC 또는 $CO-Cl_2$ 혼합가스를 각각 사용하여 환원제에 따른 ilmenite ore의 Fe 선택염화 거동에 대해 조사하였다. 환원제로 PVC를 사용한 경우, 무게 감소율은 28%로 관찰되었다. 그리고 반응관 출구부위에 생성된 응축물은 X-선 회절 분석결과 $FeCl_2$로 확인되었다. 이러한 결과로부터 ilmenite ore 내의 철은 HCl 가스와 반응하였고 $FeCl_2$ 형태로 Fe만 선택적으로 제거된 것으로 관찰하였다. 그러나 환원제로 $CO-Cl_2$ 혼합가스를 사용한 경우, 무게 감소 비율은 54%로 관찰되었으며, 실험 종료 후 반응관 출구부위에 생성된 응축물은 $FeCl_3$로 추측할 수 있었다. 이를 통해 ilmenite ore는 $CO-Cl_2$ 혼합가스와 반응하여 $FeCl_3$ 및 $TiCl_4$ 반응물 형태로 동시에 제거되는 것으로 관찰되었다. 다만 반응후 ilmenite ore의 X선 회절 결과에서 Fe는 대부분 제거되었음을 보여주었다.

• Bulletin of the Korean Chemical Society
• /
• 제34권2호
• /
• pp.357-358
• /
• 2013

• Bulletin of the Korean Chemical Society
• /
• 제16권4호
• /
• pp.349-355
• /
• 1995

Bromo-and chlorotrimethylsilane react with selenium dioxide in halocarbon solvents and generate selenium oxybromide and oxychloride, respectively. These in-situ generated oxyhalides turned out to be very efficient for selective bromination and chlorination of aldehydes and ketones. Under carefully controlled reaction conditions, second and third introduction of halogens into carbonyl compounds can be greatly suppressed, and high yields of monohalo compounds were obtained. The product ratios of this halogenation reactions can be best explained if the reactions are assumed to involve intermediate β-ketoselenenyl chlorides.

• 상하수도학회지
• /
• 제11권2호
• /
• pp.65-75
• /
• 1997

Removal characteristics of volatile organic carbons(VOCs) by ozone oxidation and other processes in the raw water of the 1st Nakdong water treatment plant were investigated. Dichrolomethane, toluene and other 7 compounds were detected in the raw water. With regard to detected 4 compounds in finally treated water, it was found that VOCs could not be removed effectively by traditional water treatment process. Benzene, 1,2-dichlorobenzne were not detected in the raw water but they were detected in the process of treatment. The compound of highest detection frequency was dichloromethane. When the raw water was controlled at pH 7, temperature $20^{\circ}C$, 5 minutes as contact time, 10 minutes as reaction time, the removal rate of THMFP, $KMnO_4$ demand, TOC, $UV_{254nm}$ and $NH_3-N$ were 46.4%, 22%, 19.6%, 31% and 8%, respectively. From estimating the finally treated water qualities in 7 kinds of treatment processes, P-6 process(raw water-chlorination-coagulation-ozonation) was most effective for organics removal and THMs control. Removal efficiencies for $KMnO_4$ demand and TOC by the process which combined preozonation with coagulation was twice better than only preozonation. $NH_3-N$ removal rate was shown as 10% by P-3 process(raw water-coagulation-ozonation), but 83% of $NH_3-N$ was removed by P-4 process(raw water-coagulation-chlorination). It was found that the chlorination is more effective than the ozonation for the NH3-N removal as commonly known.

• 대한환경공학회지
• /
• 제30권5호
• /
• pp.524-533
• /
• 2008

도금산업에서 배출되는 폐수는 독성이 강한 시안이온과 시안착화합물, 그리고 다양한 중금속이 함유되어 있다. 이러한 독성이 강한 시안이온 및 시안 착화합물의 처리는 알칼리염소법에 의한 시안 산화처리방법이 가장 일반적으로 잘 알려진 방법이다. 이는 시안이온은 분해 가능하나 시안 착화합물의 처리는 어려운 것으로 알려져 있고, 실제로 산업현장에서 수질환경보전법상 수질배출허용기준(나 지역) 1 mg/L을 초과하는 경우가 빈번하다. 본 연구에서는 앞서 밝힌 아연백법 및 공침공정을 이용한 복합 중금속-시안착염 폐수의 현장처리(I) (아래에서 "현장처리(I)"으로 표시 함)과 비교하여 크롬환원처리 후 Fe/Zn 공침공정을 적용하여 시안착염을 제거하고, 알칼리염소법에 의한 잔류시안 산화처리방법으로 검토하였다. 크롬처리는 6가 크롬을 3가 크롬으로 환원시 환원제로서 NaHSO$_3$를 사용하여 pH 2.0, ORP 250 mV, 반응시간 30 min.에서 99.9% 이상의 최대제거율을 얻을 수 있었다. Fe/Zn 공침에 의한 시안착염 제거실험은 pH 9.5, FeSO$_4$/ZnCl$_2$ 3.0 $\times$ 10$^{-4}$ mol, mixing rpm 240에서 시안이온의 제거효율은 98.24%(잔류시안농도: 4.50 mg/L)로 최대의 결과를 얻었다. 황화물 침전법에 의한 기타중금속(Cu, Ni)처리반응의 조건은 pH 9.0$\sim$10.0, 반응시간 30 min. mixing rpm 240에서 Cu의 경우 Na$_2$S 주입량 3.0 mol에서 99.9%, Ni의 경우 Na$_2$S 4.0 mol에서 93.86%의 최대결과를 얻었다. Fe/Zn공침처리 후 잔류시안농도 4.50 mg/L의 제거를 위하여 알칼리염소법을 실시한 결과 1차 산화반응은 pH 10.0 이상, ORP 350 mV, reaction time 30 min, 2차 산화반응은 pH 8.0 이하, ORP 650 mV, 반응시간 30 min.에서 제거효율 95.33%, 잔류시안농도 0.21 mg/L의 결과를 얻었다. 즉 (1) 크롬환원처리, (2) Fe/Zn 공침공정에 의한 시안착화합물 제거 및 기타 중금속(Cu, Ni) 처리, (3) 알칼리염소법에 의한 잔류시안 산화처리를 실시한 결과(아래에서 "현장처리(II)"로 표시 함) 시안의 잔류농도는 0.21 mg/L로서 수질 및 수생태계보전에 관한 법율의 수질배출허용기준(나 지역) 1 mg/L의 규제치 이하로 처리가 가능하다는 것을 현장 확인할 수 있었고 "현장처리(I)"보다 처리효율적인 측면이나 경제적인 측면에서 모두 양호한 결과를 얻을 수 있었다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1995년도 추계 학술대회논문집
• /
• pp.160-168
• /
• 1995

This paper describes computational efforts on the various energy and environmental problems using Patankar's SIMPLE method. The specific problems included in this study are : pollutant and flammable material dispersions in open and confined areas, aerator-induced flow in a lake for DO(dissolved oxygen) concentration, primary clarifier for water and waste water treatment, hood ventilation in workplace, cyclone and LNG combustors and Dow chlorination reactor. A control-volume based finite-difference method is employed together with the power-law scheme. The pressure-velocity coupling is resolved by the use of the revised version of SIMPLE, says SIMPLER and SIMPLEC. The Reynolds stresses are closed using the standard or the RNG $k-{\varepsilon}$ models. Turbulent reaction is modeled using two fast chemistry methods such as eddy breakup and conserved scalar models. Further, a nonequilibrium model is developed for the application of the chlorination process in the Dow reactor. Other important empirical models and physical insights appeared in this study are presented and discussed in a brief note. The computational method developed in this study is considered, in general, as a viable tool for the design and determination of the optimal condition of various engineering system of interest.

• 한국세라믹학회지
• /
• 제46권5호
• /
• pp.515-519
• /
• 2009

Carbon layers were fabricated on silicon carbide by chlorination reaction at temperatures between $1000^{\circ}C$ and $1500^{\circ}C$ with $Cl_2/H_2$ gas mixtures. The effect of reaction temperature on the micro-structures and tribological behavior of SiC derived carbon layer was investigated. Tribological tests were carried out ball-on-disk type wear tester. Carbon layers were characterized by X-ray diffractometer, Raman spectroscopy and surface profilometer. Both friction coefficients and wear rates were maintained low values at reaction temperature up to $1300^{\circ}C$ but increased suddenly above this temperature. Variation of surface roughness as a function of reaction temperature was dominant factor affecting tribological transition behavior of carbon layer derived from silicon carbide at high temperature.