• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.122-127
• /
• 2004

The purpose of this study is to introduce the standard of the durability and evaluation method for paper shredder. The major evaluation criteria include shredding capability, shredding blade (or cutter) hardness and edge roughness, and durability. Due to the difficulties in assessing the durability directly, performance deterioration of the shredder was assessed by measuring the torque variation along with the variation in shredded chip size and load, thereby proposing the indirect method of assessing the paper shredder durability.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.6
• /
• pp.810-817
• /
• 2014

An on-chip current sensor with fast response time for the peak-current-mode buck regulator is proposed. The initial operating points of the peak current sensor are determined in advance by the valley current level, which is sensed by a valley current sensor. As a result, the proposed current sensor achieves a fast response time of less than 20 ns, and a sensing accuracy of over 90%. Applying the proposed current sensor, the peak-current-mode buck regulator for the mobile application is realized with an operating frequency of 2 MHz, an output voltage of 0.8 V, a maximum load current of 500 mA, and a peak efficiency of over 83%.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.12
• /
• pp.1262-1268
• /
• 1991

The electric furnace which has time delay and time varying characteristics cannot be controlled easily. In this paper, a fuzzy controller for a electric furnace is implemented using one chip processor 8751 and IBM PC. The fuzzy controller is implemented in the PC. The One chip processor 8751 can sense the furnace internal temperature and pass it to IBM PC and generate the driving signal for SSR. The membership function of the fuzzy controller is determined by Least Square method. from the experiments, we can show that the fuzzy controller can improve robustness to the load variation. And the settling time is reduce 4500 (sec) to 2500 (sec).

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.154-155
• /
• 2007

Put Recently, development of micro valves that operate by compressed air has received significant attention in the fields of the micro fluid chip for medical applications or production lines of semi-conduct chip for electronic goods. Especially it is required that high-speed responsibility and lower power in optimal design of these micro valves. The primary objective of this study is to compare the optimally designed Solenoid Valve with the actually produced one which can highly improve the efficiency by providing optimal current according to mechanical load.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.318-320
• /
• 1995

This paper describes the practical implementation of switched reluctance motor drive for a wide range of operation speeds. The angle controller is designed by one-chip microprocessor 8051 for various real time applications. Algorithm to control the speed of SRM and to maintain the speed under the changed load is proposed.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.3
• /
• pp.16-23
• /
• 2017

For most machine tools, it is necessary to remove chips and coolant oil because it they will continue to be created during the manufacture of workpieces. Existing products that are in use are installed and used as they reflect depending on the characteristics of each device separately. This study proposes a method to remove the security chip as well as developing an integrated system capable of reducing coolant damage. The Leverage AutoCAD and CATIA program was used for 2D and 3D design, shapes were identified by utilizing the KeyShot program, and the load and displacement analysis of the development apparatus was performed utilizing the ANSYS program. After the prototype underwent sufficient design review, the mixed oil separation device had a complete sensor control program using the LabVIEW program. The chip design process for transferring experiments and experiments on the mixed oil cooling device were developed for performance tests of the product. The final product resulted in an increase in space utilization during commercialization, reduced installation costs, and caused social effects such as pulmonary flow reduction, which, through the economic costs, reduces pollution, resulting in various benefits to the industry, such as deceased errors in the workplace decreases.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.6
• /
• pp.1195-1201
• /
• 2005

This paper deals with procedures and results for teal time implementation of G.729 speech coder and channel coder including convolution codec, viterbi decoder, and interleaver using a fixed point DSP chip for radio communication systems. We described the method for real-time implementation based on integer simulation results and explained the implemented results by quality performance and required complexity for real-time operation. The required complexity was 24MIPS and 9MIPS in computational load, and 12K words and 4K words in execution code length for speech and channel. The functional evaluation was performed into two steps. The one was bit exact comparison with a fixed point C code, the other was executed by actual speech samples and error test vectors. Unlik other results such as individual implementation, We implemented speech and channel coders on a DSP chip with 160MIPS computation capability and 64 K words memory on chip. This results outweigh the conventional methods in the point of system complexity and implementation cost for radio communication system.

• Journal of Advanced Navigation Technology
• /
• v.19 no.5
• /
• pp.423-432
• /
• 2015

This paper shows that design, manufacture and the performance of FC-NIC (fibre channel network interface card) for network unit configuration which is based on one of the 5 main configuration items of the common functional module for IMA (integrated modular Avionics) architecture. Especially, FC-NIC uses zynq SoC (system on chip) for host load reductions. The host merely transmit FC destination address, source memory location and size information to the FC-NIC. After then the FC-NIC read the host memory via DMA (direct memory access). FC upper layer protocol and sequence process at local processor and programmable logic of FC-NIC zynq SoC. It enables to free from host load for external communication. The performance of FC-NIC shows average 5.47 us low end-to-end latency at 2.125 Gbps line speed. It represent that FC-NIC is one of good candidate network for IMA.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.2
• /
• pp.292-300
• /
• 2015

This paper proposes a high-efficiency, dual-mode PWM / linear buck converter with a wide-input range. The proposed converter was designed with a mode selector that can change the operation between PWM / linear mode by sensing a load current. The proposed converter operates in a linear mode during a light load and in PWM mode during a heavy load condition in order to ensure high efficiency. In addition, the mode selector uses a bit counter and a transmission gate designed to protect from a malfunction due to noise or a time-delay. Also, in conditions between $-40^{\circ}C$ and $140^{\circ}C$, the converter has variations in temperature of $0.5mV/^{\circ}C$ in the PWM mode and of $0.24mV/^{\circ}C$ in the linear mode. Also, to prevent malfunction and breakdown of the IC due to static electricity, the reliability of IC was improved by embedding a self-produced 8 kV-class(Chip level) ESD protection circuit of a P-substrate Triggered SCR type with high robustness characteristics.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.341-344
• /
• 2006

LED chips are produced by cutting the sapphire on which GaN is evaporated. To cut the sapphire wafer into each LED chip, at first the wafer is scribed by diamond tool. To get the sharp groove shape for the nice cutting plane it is important the diamond tool shape, load, etc when the wafer is scribed. Here we tried to simulate the scribing process and get the scribing condition to reduce the wear rate of diamond tool for the sharp groove shape.