• Korean Chemical Engineering Research
• /
• v.45 no.1
• /
• pp.67-72
• /
• 2007

An efficient method for identification of MIMO state space model has been developed by combining partial least squares (PLS) regression, balanced realization, and balanced truncation. In the developed method, a MIMO system is decomposed into multiple MISO systems each of which is represented by a high-order ARX model and the parameters of the ARX models are estimated by PLS. Then, MISO state space models for respective MISO ARX transfer function are found through realization and combined to a MIMO state space model. Finally, a minimal balanced MIMO state space model is obtained through balanced realization and truncation. The proposed method was applied to the design of model predictive control for temperature control of a high pressure $CO_2$ solubility measurement system.

• Nano
• /
• v.13 no.11
• /
• pp.1850134.1-1850134.10
• /
• 2018

Increasing active sites and enhancing electric conductivity are critical factors to improve sensing performance toward phenol. Herein, Ni nanoparticle was successfully anchored on acidified multiwalled carbon nanotube (a-MWCNT) surface by electroless plating technique to avoid Ni nanoparticle agglomeration and guarantee high conductivity. The crystal structure, phase composition and surface morphology were characterized by XRD, SEM and TEM measurement. The as-prepared Ni/a-MWCNT nanohybrid was immobilized onto glassy carbon electrode (GCE) surface for constructing phenol sensor. The phenol sensing performance indicated that Ni/a-MWCNT/GCE exhibited an amazing detection performance with rapid response time of 4 s, a relatively wide detection range from 0.01 mM to 0.48 mM, a detection limit of $7.07{\mu}M$ and high sensitivity of $566.2{\mu}A\;mM^{-1}\;cm^{-2}$. The superior selectivity, reproducibility, stability and applicability in real sample of Ni/a-MWCNT/GCE endowed it with potential application in discharged wastewater.

• Bulletin of the Korean Chemical Society
• /
• v.14 no.1
• /
• pp.72-78
• /
• 1993

The application of time-resolved laser induced fluorescence spectroscopy (TRLIF) to the complexation studies of Eu(III) and Cm(III) with humic substances is described. Using this method, three different spectroscopic characteristics(excitation spectra, emission spectra, and lifetimes) of these aquo ions and their complexes can be directly measured. By observing shifts in the wavelength and changes in the lifetime and intensities of the fluorescence emission, the information on the complexation behavior of humic substances with these trivalent metal cations in an aqueous solution, as well as energy transfer mechanisms, can be obtained. In addition, this method allows precise spectroscopic quantification of the complexation processes at very low concentrations of both components.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.7
• /
• pp.1019-1024
• /
• 2004

The present paper is focused on simultaneous sorption concentration of gold (III) and silver (I) from thiocyanate solutions using high-selective anion exchanger AN-25 and subsequent separation of these ions at various concentrations of thiocarbamide (eluent). As a result, silver (I) ions are completely eluted from AN-25 and gold (III) ions remain in the resin phase and can be determined directly in the solid phase by diffuse reflection spectroscopy. It is proposed to use the sorption-spectroscopic method for Au(III) determination in aqueous solutions. The calibration curve is linear in the concentration range of 1-19 mg/L (sample volume is 10.0 mL) and the detection limit is 0.05 ${\mu}g/mL$. The presence of Cu(II), Co(II), Fe(II) do not hinder this determination. Au(III) was determined in industrial solutions.

• Korean Journal of Environmental Biology
• /
• v.23 no.4
• /
• pp.379-382
• /
• 2005

The new cationic meso-substituted N-quarternized 4-pyridylporphyrins and their metal derivatives were synthesized as novel chemotherapeutics. The level of DNA damage induced by porphyrins TOBut4PyP, TOBut4PyP, TOEt4PyPMn and TOBut4PyPMn and its dependence on the chemical structure of compounds were analyzed by the Comet-assay. On the base of data obtained, the investigated porphyrins may be arranged by their genotoxic activity in the following order: TOEt4PyP>TOEt4PyPMn>TOBut4PyP>TOBut4PyPMn. Thus, i) the genotoxicity of the Mn-derivatives of TOEt4PyP and TOBut4PyP is higher than the original porphyrins and ii) the genotoxicity of TOEt4PyP and TOEt4PyPMn is increased after substitution of a butyl radical for ethyl one. The applied Comet-assay permits to reveal the dependence of DNA damage induction on the chemical structure of porphyrins.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.8
• /
• pp.2607-2610
• /
• 2011

Monodispersed Ag/$TiO_2$ core/shell nanoparticles were synthesized in solution via colloid-seeded deposition process using Ag nanoparticles as colloid seeds and $Ti(SO_4)_2$ as Ti-source respectively. Silver nitrate was reduced to Ag nanoparticles with $N_2H_4{\cdot}H_2O$ in the presence of CTAB as stabilizing agent. The titania sols hydrolyzed by the $Ti(SO_4)_2$ solution deposited on the surface of Ag nanoparticles to form the Ag/$TiO_2$ core/shell nanoparticles. Inductively coupled plasma atomic emission spectrometry (ICP-AES) showed low amount of Ag ion leaching from the Ag/$TiO_2$ core/shell nanoparticles. The Ag/$TiO_2$ core/shell nanoparticles indicated excellent antibacterial effects against Escherichia coli and maintained long-term antibacterial property.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.10
• /
• pp.1618-1622
• /
• 2006

Bacteriophage T7 gp4A' is a ring-shaped hexameric DNA helicase that catalyzes duplex DNA unwinding using dTTP hydrolysis as an energy source. To investigate the effect of single-stranded DNA (ssDNA) on the kinetic pathway of dTTP hydrolysis by the T7 DNA helicase complexed with ssDNA, we have first determined optimal concentration of long circular M13 single-stranded DNA and pre-incubation time in the absence of $Mg^{2+}$ which is necessary for the helicase-ssDNA complex formation. Steady state dTTP hydrolysis in the absence of $Mg^{2+}$ by the helicase-ssDNA complex provided $k_{cat}$ of $8.5\;{\times}\;10^{-3}\;sec^{-1}$. Pre-steady state kinetics of the dTTP hydrolysis by the pre-assembled hexameric helicase was monitored by using the rapid chemical quench-flow technique both in the presence and absence of M13 ssDNA. Pre-steady state dTTP hydrolysis showed distinct burst kinetics in both cases, indicating that product release step is slower than dTTP hydrolysis step. Pre-steady state burst rates were similar both in the presence and absence of ssDNA, while steady state dTTP hydrolysis rate in the presence of ssDNA was much faster than in the absence of ssDNA. These results suggest that single-stranded DNA stimulates dTTP hydrolysis reaction by T7 helicase by enhancing the rate of product release step.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.5
• /
• pp.1643-1646
• /
• 2012

Three Ni-based catalysts with different clay as support were prepared and tested in the hydrogenation of maleic anhydride, among which Ni/clay1 showed best activity and selectivity. Over Ni/clay1 catalyst prepared by impregnation method, 97.14% conversion of maleic anhydride and 99.55% selectivity to succinic anhydride were obtained at $180^{\circ}C$ under a pressure of 1 MPa. Catalytic activity was greatly influenced by the temperature and weighted hourly space velocity. Catalyst deactivation studies showed that this catalyst have a long life time, the yield of MA still higher than 90% even after a reaction time of 60 h. X-ray diffraction (XRD) and $H_2$ temperature programmed reduction (TPR) were use to investigate the properties of the catalyst. XRD and TPR studies showed that Ni was present as $Ni^{2+}$ on the support, which indicated that there was no elemental nickel ($Ni^0$) and $Ni_2O_3$ in the unreduced samples. The formation of Ni was strong impact on catalytic activity.

• Journal of the Korean Applied Science and Technology
• /
• v.26 no.1
• /
• pp.51-59
• /
• 2009

Natural Artemisia extraction was extracted from Artemisia component using diethyl ether as a solvent, and we tested various pharmacetical and chemical characteristics of this extract. Characteristic experiments to use natural Artemisia extract tested antimicrobial experiment using microbe in pharmacetical material, and tested dye experiment using fiber in chemical material. From the result of characteristics experiment, some conclusions are obtained as follow. From the result of extraction experiment, it obtained about 10.4%-Artemisia extraction ratio as semi-solid state, and after dried in freezing from Artemisia extract of semi-solid state, it obtained about 10%-Artemisia extraction ratio as solid state of dark blue-green color. From result of antimicrobial experiment of Artemisia extract, number of staphylococcus aureus (ATCC-01) and aspergillus niger (ATCC-02) in microbe decreased more and more according to time passage. This phenomenon showed that Artemisia extract influences to antimicrobial effect. From the result of dye experiment of Artemisia extract, it appeared in direction of dark blue-green color after dyed to use cotton and silk with fiber to control in pH 7.5. Specially the result which confirmed dye of fiber with optical electron microscope (OEM), we could know that it appears darker silk than cotton.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.3
• /
• pp.777-782
• /
• 2013

In order to further reduce the sulfur content in liquid hydrocarbon fuels, a desulfurization process by adsorption for removing dimethyl sulfide (DMS) and propylmercaptan (PM) was investigated. Bentonite adsorbents modified by $CuCl_2$ for the desulfurization of model oil was investigated. The results indicated that the modified bentonite adsorbents were effective for adsorption of DMS and PM. The bentonite adsorbents were characterized by X-ray diffraction (XRD) and thermal analysis (TGA). The acidity was measured by FT-IR spectroscopy. Several factors that influence the desulfurization capability, including loading and calcination temperature, were studied. The maximum sulfur adsorption capacity was obtained at a Cu(II) loading of 15 wt %, and the optimum calcination temperature was $150^{\circ}C$. Spectral shifts of the ${\nu}$(C-S) and ${\nu}$(Cu-S) vibrations of the complex compound obtained by the reaction of $CuCl_2$ and DMS were measured with the Raman spectrum. On the basis of complex adsorption reaction and hybrid orbital theory, the adsorption on modified bentonite occurred via multilayer intermolecular forces and S-M (${\sigma}$) bonds.