• Environmental Analysis Health and Toxicology
• /
• v.31
• /
• pp.24.1-24.7
• /
• 2016

The humidifier disinfectant disaster (HDD) was not a simple poisoning accident by biocides, but a singular disaster in history created by chemicals in household products. This disaster was a result of the failure of a system for the management of chemical and product safety. Since the management authority for chemical usage safety is different from those for chemical safety in products, many blind areas for chemical safety management in products still remain. The 'Act on the Registration and Evaluation, etc. of Chemical Substances (ARECS)' or the new 'Biocidal Product Act' must not only address the blind areas in the management system for chemical and product safety, but also prevent a second HDD. To prevent another HDD, an integrated registration, evaluation, and management system for chemicals and consumer products must be incorporated into the 'ARECS' as an essential part for chemical safety in consumer products.

• Safety and Health at Work
• /
• v.11 no.4
• /
• pp.500-508
• /
• 2020

Background: Research on the status of many chemicals used in the semiconductor industry is needed. The purpose of this study was to describe the overall status of chemical use in the semiconductor industry in Korea and to examine it from a health perspective. Methods: Data on the status of chemical use and safety data sheets at 11 of 12 major semiconductor workplaces in Korea were collected. The number of chemical products and chemical constituents, quantities of chemicals, and trade secret ingredients used, as well as the health hazards were examined. Results: On average, 210 chemical products and 135 chemical constituents were used at the surveyed workplaces. Among all chemical products, 33% (range: 16-56%) contained at least one trade secret ingredient. Most of the trade secret ingredients were used in the photolithography process. Several carcinogens, including sulfuric acid, chromic acid, ethylene oxide, crystalline silica, potassium dichromate, and formaldehyde were also used. Only 29% (39 of 135) of the chemical constituents had occupational exposure limits, and more than 60% had no National Fire Protection Association health, safety, and reactivity ratings. Based on the aforementioned results, this study revealed the following. First, many chemical products and constituents are being used in the semiconductor industry and many products contained trade secret ingredients. Second, many products contained significant amounts of carcinogenic, mutagenic, and reproductive toxicant materials. Conclusion: We conclude that protecting workers in the semiconductor industry against harm from chemical substances will be difficult, due to widespread use of trade secret ingredients and a lack of hazard information. The findings of the status of chemical use and the health and safety risks in semiconductor industry will contribute to epidemiological studies, safe workplace, and worker health protection.

• Safety and Health at Work
• /
• v.10 no.1
• /
• pp.114-121
• /
• 2019

Background: The photolithography process in the semiconductor industry uses various chemicals with little information on their constitution. This study aimed to identify the chemical constituents of photoresist (PR) products and their by-products and to compare these constituents with material safety data sheets (MSDSs) and analytical results. Methods: A total of 51 PRs with 48 MSDSs were collected. Analysis consisted of two parts: First, the constituents of the chemical products were identified and analyzed using MSDS data; second, for verification of the by-products of PR, volatile organic compounds were analyzed. The chemical constituents were categorized according to hazards. Results: Forty-five of 48 products contained trade secrets in amounts ranging from 1 to 65%. A total of 238 ingredients with multiple counting (35 ingredients without multiple counting) were identified in the MSDS data, and 48.7% of ingredients were labeled as trade secrets under the Korea Occupational Safety and Health Act. The concordance rate between the MSDS data and the analytical result was 41.7%. The by-product analysis identified 129 chemicals classified according to Chemical Abstracts Service No., with 17 chemicals that are carcinogenic, mutagenic, and reprotoxic substances. Formaldehyde was found to be released from 12 of 21 products that use novolak resin. Conclusion: We confirmed that several PRs contain carcinogens, and some were not specified in the toxicological information in the MSDS. Hazardous chemicals, including benzene and formaldehyde, are released from PRs products as by-products. Therefore, it is necessary to establish a systematic management system for chemical compounds and the working environment.

• Journal of Environmental Health Sciences
• /
• v.50 no.2
• /
• pp.138-145
• /
• 2024

Background: Appropriateness issues have emerged regarding the non-application of hazardous substance safety standards for items classified as 'other textile products'. Objectives: Testing for formaldehyde (HCHO) and risk assessment were conducted on 'other textiles products' to provide reference data for promoting product safety policies. Methods: Testing was conducted on five items (102 products) classified as 'other textile products' according to relevant standards (textile products safety standards), and the risk of each product was assessed using the evaluation methodologies of the European Centre for Ecotoxicology and Toxicology of Chemicals (ECETOC) and European Chemical Agency (ECHA). Results: Out of the 102 products tested, HCHO was detected above the quantification limit in five. Based on these results, the screening risk assessment indicated that three products exceeded the criteria. Upon reassessing the emission and transfer rates of products exceeding the criteria, it was confirmed that there were no instances of exceeding the criteria. Conclusions: Risk assessment results can be used as supporting data for non-application of hazardous substance standards. However, it is deemed necessary to transition towards a management approach based on risks in order to addressing emerging trends such as convergence/new products.

• Safety and Health at Work
• /
• v.9 no.4
• /
• pp.473-478
• /
• 2018

Background: Multiple Chemical Sensitivity (MCS) is an acquired disease which etiology remains unknown. It is characterized by the development of sensitivity to certain chemical products. Most of the hypotheses formulated to explain the syndrome associate it to a previous exposition to some kind of volatile chemical. University researchers in chemical laboratories suffer a phenomenon of multi-exposition to chemical agents at low concentration during long periods of time although in an irregular form. Many of these chemical agents have similar properties to those suspicious of causing MCS. This article studies the prevalence of MCS in laboratory researchers. Methods: The study group is university researchers in chemical laboratories. The control group was obtained from administrative personnel who work in the same universities and therefore, are not exposed to chemical products from the laboratories, but have the same exposition to the rest of environmental polluting agents from the area and from the buildings of the university. In this study, it is used the Quick Environmental Exposure and Sensitivity Inventory (QEESI) (sensitivity of 92%/specificity of 95%). Results: The results showed that the prevalence of MCS for the university researchers is not related to exposition by inhalation to multiple chemical agents, at low concentration. Conclusions: The results disagree with one of the main etiological hypotheses of MCS, which is based on the existence of hypersensitive people, who presents a response after prolonged expositions to very low concentrations during a long period of time.

• Korean Journal of Environmental Agriculture
• /
• v.35 no.3
• /
• pp.211-215
• /
• 2016

BACKGROUND: The commercial biopesticides containing Chenopodium ambrosioides L. extracts which have been registered as one of the ingredients of the commercial biopesticide by the organic agriculture materials, and have been widely used in Republic of Korea. However, the quantitative analysis method of the active substances for the commercial biopesticides containing C. ambrosioides L. extract has not been conducted.METHODS AND RESULTS: To analyze the quantitative analysis of ascaridole, carvacrol, and p-cymene as active substances of C. ambrosioides L. extract, hydrophilic lipophilic balance cartridge was used for solid phase extraction. The active substances were analyzed by the gas chromatography with flame ionization detector. The limit of quantitation values of ascaridole, carvacrol, and p-cymene were 10, 5, and 2 mg/L, and the recovery rates were 96.3, 84.0, and 82.5% in liquid products and 98.3, 99.1, and 97.3% in solid products, respectively. The total content of ascaridole, carvacrol, and p-cymene in the commercial biopesticides was ranged from 0.08 to 12.75%.CONCLUSION: From these results, this method was suitable for the quantitative analysis of the active substances of commercial biopesticides containing C. ambrosioides L. extract.

• Journal of the Korea Safety Management & Science
• /
• v.3 no.2
• /
• pp.105-112
• /
• 2001

This study concerns with the accident characteristics and prevention in small manufacturing industries of chemical products. To investigate the accident characteristics, we used workers' compensation reports and employers' accident analysis reports. One hundred and seven injury accidents which results in more than 4 days absence were surveyed from the manufacturing companies with under 100 employees. These data were used to investigate the accident characteristics in terms of company size, injured person's age, work experience, accident time, activity at time of accident, accident type, injury type, injured body Part, and accident agency We propose the accident prevention policy based on the accident characteristics. These results can be used to develop more effective occupational safety management policies in small manufacturing industries of chemical products.

• Journal of the Korean Society of Safety
• /
• v.11 no.1
• /
• pp.53-59
• /
• 1996

To protect the damages or the disasters caused by overheating of industrial electric equipments or electric home appliances, a temperature sensitive thermal fuse is generally used in those equipments. Thermal fuses cutoff the current flow when the temperature of the electric equipments are abnormally overheated and over the certain temperature. Therefore thermal fuse is one of the most important elements in the sense of safety. Thermal fuses are classified into two types according to thermally sensitive materials, a low temperature melting alloy and an organic chemical compound. Domestic products of thermal fuses are now only with an organic chemical compound. Domestic products tested by using cutoff test and aging test etc. are satisfied UL specification. It's shown that the accuracy and the precision of the domestic products are as good as those of the overseas products obtained UL mark. However, some of domestic products show the reclosing problem which is mainly related the safety. This problem should be solved to make the reliable thermal fuses. In this paper, our Interest is to find out the causes of reclosing. In the comparison between thermally sensitive materials occurred reclosing and those occurred no reclosing, the test effects show that the characteristics of emitting heat and absorbing heat are different.

• The Plant Pathology Journal
• /
• v.40 no.1
• /
• pp.73-82
• /
• 2024

Gardenia (Gardenia jasminoides) is a popular and economically vital plant known for its ornamental and medicinal properties. Despite its widespread cultivation, there has been no documentation of plant viruses on gardenia yet. In the present study, gardenia leaves exhibiting symptoms of plant viral diseases were sampled and sequenced by both metatranscriptome and small RNA sequencing. As a consequence, bean common mosaic virus (BCMV) was identified in gardenia for the first time and named BCMV-gardenia. The full genome sequence of BCMV-gardenia is 10,054 nucleotides (nt) in length (excluding the poly (A) at the 3' termini), encoding a large polyprotein of 3,222 amino acids. Sequence analysis showed that the N-termini of the polyprotein encoded by BCMV-gardenia is less conserved when compared to other BCMV isolates, whereas the C-termini is the most conserved. Maximum likelihood phylogenetic analysis showed that BCMVgardenia was clustered closely with other BCMV isolates identified outside the leguminous plants. Our results indicated that the majority of BCMV-gardenia virus-derived small interfering RNAs (vsiRNAs) were 21 nt and 22 nt, with 21 nt being more abundant. The first nucleotide at the 5' termini of vsiRNAs derived from BCMV-gardenia preferred U and A. The ratio of vsiRNAs derived from sense (51.1%) and antisense (48.9%) strands is approaching, and the distribution of vsiRNAs along the viral genome is generally even, with some hot spots forming in local regions. Our findings could provide new insights into the diversity, evolution, and host expansion of BCMV and contribute to the prevention and treatment of this virus.

• Animal Bioscience
• /
• v.37 no.1
• /
• pp.28-38
• /
• 2024

Objective: Tibetan chickens, which have unique adaptations to extreme high-altitude environments, exhibit phenotypic and physiological characteristics that are distinct from those of lowland chickens. However, the mechanisms underlying hypoxic adaptation in the liver of chickens remain unknown. Methods: RNA-sequencing (RNA-Seq) technology was used to assess the differentially expressed genes (DEGs) involved in hypoxia adaptation in highland chickens (native Tibetan chicken [HT]) and lowland chickens (Langshan chicken [LS], Beijing You chicken [BJ], Qingyuan Partridge chicken [QY], and Chahua chicken [CH]). Results: A total of 352 co-DEGs were specifically screened between HT and four native lowland chicken breeds. Gene ontology and Kyoto encyclopedia of genes and genomes enrichment analyses indicated that these co-DEGs were widely involved in lipid metabolism processes, such as the peroxisome proliferator-activated receptors (PPAR) signaling pathway, fatty acid degradation, fatty acid metabolism and fatty acid biosynthesis. To further determine the relationship from the 352 co-DEGs, protein-protein interaction network was carried out and identified eight genes (ACSL1, CPT1A, ACOX1, PPARC1A, SCD, ACSBG2, ACACA, and FASN) as the potential regulating genes that are responsible for the altitude difference between the HT and other four lowland chicken breeds. Conclusion: This study provides novel insights into the molecular mechanisms regulating hypoxia adaptation via lipid metabolism in Tibetan chickens and other highland animals.