• Carbon letters
• /
• v.6 no.1
• /
• pp.25-30
• /
• 2005

The electrosorption of U(VI) from waste water was carried out by using an activated carbon fiber (ACF) felt electrode in a continuous electrosorption cell. In order to enhance the electrosorption capacity at a lower potential, the ACF was electrochemically modified in an acidic and a basic solution. Pore structure and functional groups of the electrochemically modified ACF were examined, and the effects of the modification conditions were studied for the adsorption of U(VI). Specific surface area of all the ACFs was decreased by this modification. The amount of the acidic functional groups decreased with a basic modification, while the amount increased a lot with an acidic modification. The electrosorption capacity of U(VI) decreased on the acid modified electrode due to the shielding effect of the acidic functional groups. The base modified electrode enhanced the capacity due to a reduction of the acidic functional groups. The electrosorption amount of U(VI) on the base modified electrode at .0.3 V corresponds to that of the as-received ACF electrode at .0.9 V. Such a good adsorption capacity was due to a reduction of the shielding effect and an increase of the hydroxyl ions in the electric double layer on the ACF surface by the application of negative potential.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.12
• /
• pp.113-118
• /
• 2010

For a present study, woven type carbon fibers were surface-modified by oxygen plasma to improve adhesive strength between carbon fibers and epoxy. The change of hydrophilic properties by the plasma modification was investigated through the contact angle measurement and the calculation of surface energy of carbon fiber due to the oxygen plasma modification. FESEM and XPS analyses were performed to study the chemical and physical changes on the surface of carbon fibers due to the oxygen plasma modification. Pin-on-disk wear tests were conducted under dry condition using unmodified and plasma-modified carbon/epoxy composites to investigate the effect of plasma modification on the wear behavior of woven type carbon/epoxy composites. The results showed that the friction coefficient and the wear rate of plasma-modified carbon/epoxy composites were lower than those of unmodified carbon/epoxy composites, respectively. XPS analysis showed that new functional group of a carbonyl type was created on the carbon fibers by the $O_2$ plasma treatment, which enhanced adhesive strength between carbon fibers and epoxy, leading to improve wear properties

• Korean Chemical Engineering Research
• /
• v.55 no.3
• /
• pp.409-418
• /
• 2017

In preparation of self-repairing polymer-modified waterproofing asphalt-montmorillonite (MMT) composite, silylation-modification characteristics of cation ($Na^+$) exchanged K-10 (Na-MMT-K) using 3-aminopropyltriethoxysilane (APS) were studied and the optimal conditions of its silylation-modification process were proposed by use of the results of instrumental analysis, including FTIR, XRD, NMR and TGA, on silylation-modified Na-MMT-K (S-Na-MMT-K) under various conditions. According to FTIR analysis on S-Na-MMT-K, its peak-strengths of Si-O, -$NH_2$, -$CH_2$- and -OH, correlated with APS silylation-modification reaction, were compared each other. As a result, its optimal conditions including APS-MMT reacting period, APS-stirring period prior to APS-MMT reaction, APS concentration and reaction temperature were turned out to be 2~3 h, 20 min, 7.5 w/v% and $50^{\circ}C$, respectively. In addition, the optimal conditions induced from the results of TGA were also nearly consistent to those according to the results of FTIR analyses. These optimal conditions were turned out to be almost consistent to those drawn according to a criterion from XRD results suggested previously by Lee et al., by which the criterion was validated.

• Membrane and Water Treatment
• /
• v.9 no.5
• /
• pp.317-325
• /
• 2018

Polyvinyl chloride (PVC) ultrafiltration (UF) membrane was modified by silica sol in the coagulation bath during non-solvent induced phase separation (NIPS) process. The effects of silica sol concentrations on the morphology, surface property, mechanical strength and separation property of PVC UF membranes were systematically investigated. PVC membranes were characterized by Fourier transform infrared spectroscopy (FTIR), energy dispersive spectroscopy (EDS), scanning electron microscopy (SEM), contact angle goniometry and tensile strength measurement. The results showed that silica had been successfully assembled on the surface of PVC UF membrane. With the increase of silica sol concentration in the coagulation bath, the morphologies of PVC UF membranes changed from cavity structure to finger-like pore structure and asymmetric cross-section structure. The hydrophilicity and permeability of PVC UF membranes were further evaluated. When silica sol concentration was 20 wt.%, the modified PVC membrane exhibited the highest hydrophilicity with a static contact angle of $36.5^{\circ}$ and permeability of $91.8(L{\cdot}m^{-2}{\cdot}h^{-1})$. The structure of self-assemble silica had significant impact on the surface property, morphology, mechanical strength and resultant separation performance of the PVC membranes.

• Applied Chemistry for Engineering
• /
• v.27 no.2
• /
• pp.135-144
• /
• 2016

Due to the high price volatility and environmental concern of petroleum, biofuels such as bioethanol produced from lignocellulosic biomass have attracted much attention. It is also expected that the amount of lignin residue generated from pretreatment of lignocellulosic biomass will increase as the volume of cellulosic bioethanol increases. Lignin is a natural aromatic polymer and has very complex chemical structures with chemical functional groups. Chemical modification of lignin such as oxypropylation and epoxidation has also been applied to the production of value-added bioplastics such as polyurethane and polyester with enhanced thermal and mechanical properties. In addition, lignin can be used for carbon fiber production in automobile industries. This review highlights recent progresses in utilizations and chemical modifications of lignin for the production of bioplastics, resins, and carbon fiber.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.57.1-57.1
• /
• 2010

Development of low cost hybrid functional nano-structured materials has great interest to enhance sensitivity of dye-sensitized solar cells and reduction of the production cost. In this talk we will discuss about using different processes to modify functional characteristics of photoelectrode and investigate effects of chemical modification without significant structural variation on to enhance performance of DSSCs. Efficient electron transportation between dye molecules and photoelectrode has been obtained by appropriate chemical modification and efficiency of DSSC has been significantly improved. A comparative analysis on effects of surface functional and electron states of photoelectrode on VOC and JSC has been also carried out to discuss effects of composite materials on physical structure and electronic properties to correlate enhanced performance of these devices.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.11
• /
• pp.3928-3932
• /
• 2011

We synthesized peptide-resin conjugates (1 and 2) by immobilizing ${\beta}$-sheet antibacterial peptide and ${\alpha}$ helical antibacterial peptide on PEG-PS resin, respectively. Conjugate 1 showed considerable antibacterial activity in various conditions, whereas conjugate 2 did not exhibit antibacterial activity. The growths of various bacteria were inhibited by conjugate 1 even at lower concentrations than MIC. Conjugate 1 killed bacteria at MIC and had a potent synergistic effect with current antibacterial agents such as vancomycin and tetracycline, respectively. Overall results indicate that polymer surface modification using antibacterial ${\beta}$ sheet peptide is a powerful way to prevent microbial contamination on polymer surfaces.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.5
• /
• pp.663-666
• /
• 2006

Carnosine, homocarnosine and anserine might act as anti-oxidants and free radical scavengers in vivo. In the present study, the protective effects of carnosine and related compounds on the $H_2O_2$-mediated cytochrome c modification were studied. Carnosine, homocarnosine and anserine significantly inhibited the oligomerization of cytchrome c induced by $H_2O_2$. All three compounds also inhibited the formation of carbonyl compound and dityrosine during the incubation of cytochrome c with $H_2O_2$. These compounds effectively inhibited the peroxidase activity in the cytchrome c treated with $H_2O_2$. The results suggested that carnosine, homocarnosine, and anserine might protect cytochrome c against $H_2O_2$-mediated oxidative damage through a free radical scavenging.

• Applied Biological Chemistry
• /
• v.47 no.1
• /
• pp.154-156
• /
• 2004

• KSBB Journal
• /
• v.11 no.2
• /
• pp.186-192
• /
• 1996

The effects of chemical modification on the enzymes' stability in polar organic solvents were studied with subtilisin Carlsberg in dimethylformamide-water mixtures as a model system. Three out of nine lysine residues of subtilisin Carlsberg were coupled to either trimellilic or pyromellitic anhydrides thereby, for each lysine residue modified, resulting in the net replacement of one basic amino group by two or three acidic carboxyl groups, respectively. In water at 60$^{\circ}C$, both trimellitic and pyromellitic anhydride-modified subtilisin Carlsberg showed increased thermostability by 2.6 times and 1.6 times, respectively, as compared to that of unmodified enzyme. In 70% dimethylformamide at 25$^{\circ}C$, however, only pyromellitic acrid was shown to enhance the stability of subtilisin Carlsberg by 5.5 times increasing the half life time of irreversible inactivation from 4.9hr for unmodified enzyme to 27.8hr for modified enzyme.