• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.18 no.1
• /
• pp.32-40
• /
• 2008

Methyl bromide has been used as a representative fumigant for quarantine, and several poisoning cases have occurred recently by this chemical in Korea. The purpose of this study is to evaluate workers' exposures to airborne methyl bromide in the importing and exporting plant products quarantine companies. Air samples were collected 400/200 mg Anasorb 747TM and were analyzed by gas chromatograph /flame ionization detector according to the Occupational Safety and Health Agency (OSHA) Method PV2040. Geometric mean (GM) and arithmetic mean (AM) of total 27 workers' exposure concentrations to airborne methyl bromide were 1.12 ppm and 0.24 ppm, respectively. Two exposures(12.1 ppm and 12 ppm as 8hr-TWA) of total 27 workers' exposures exceeded the Korean standard (5 ppm) of Ministry Labor, while 4 exposures (15%) exceeded the Threshold Limit Value (TLV) (1 ppm) of American Conference of Governmental Industrial Hygienists (ACGIH). Seven samples (11%) of total 63 short-term air samples exceeded the OSHA Permissible Exposure Limit (PEL) 20 ppm (Ceiling). The opening (management) task in wood fumigation by tent showed the highest short-term exposure concentrations (AM: 18.6 ppm, GM: 0.58 ppm, maximum: 340.7 ppm). The maximum level in treatment task of the same process was 2.01 ppm. Methyl bromide concentrations in opening operation was significantly higher than that in treatment operation (p<0.05). In conclusion, the GM of workers' 8hr-TWA exposures to airborne methyl chloride in the importing/exporting plant quarantine industry was estimated below the ACGIH TLV (1 ppm). However, opening task in the fumigation of wood being covered with tent or fumigation of pant products in container showed the levels exceeding ACGIH TLV (1 ppm), and opening task in the fumigation of wood being covered with tent showed the level exceeding the Korean standard of Ministry of Labor (5 ppm).

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.5
• /
• pp.463-469
• /
• 2018

A currently used roof green system with multi layers has a low constructability. Therefore a new integrated waterproof & root barrier sheet and roof green box unit system was developed using steel plate fixture and cone type fixture by electromagnetic induction heating method. This study was proceeded to evaluate adhesion performance of two types of fixtures on Engineering PE, TPO, PVC sheet in a normal condition, repeated heating and cooling condition. As a result, adhesion load on Engineering PE sheet showed the highest value. The adhesion loads of steel plate fixture showed higher value as heating temperature was getting higher. However adhesion loads of cone type fixture showed opposite tendency. Regarding to the test conditions, test results of normal condition, repeated heating and cooling condition showed same value. The cone type fixture using butyl tape showed 7 times lower adhesion load than that of cone type fixture using electromagnetic heating and 28% lower adhesion load in a repeated heating and cooling condition than a usual condition.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.34 no.5
• /
• pp.39-48
• /
• 2002

The water retention of coating colors can be accurately measured by devices such as an AA-GWR water retention meter whose principle of measurement Is based on pressure filtration of coatings under an externally applied air pressure over a certain period of time. It was hypothesized that such devices could be also used to determine the immobilization solids (IMS) of coating colors by determining a sudden drop in the rate of dewatering, that is, a sudden change in the drainage curves. To test this hypothesis, the immobilization solids of coating colors containing various thickeners and water retention additives at different levels were first accurately measured by a modified immobilization tester based on the well-known gloss drop method, and then their values were compared with those obtained by an AA-GWR water retention tester. They agreed very well and showed that the standard deviation is only 0.14% in the IMS points between both methods. This good agreement was not surprising because both test methods are based on the same end-point, that is, the immobilization solids point at which menisci begin to form at the coating surface. Theoretical considerations supporting this new method for measuring the immobilization solids of coating colors are presented and some recommendations for the test method are discussed. Also, the effect of various thickeners and water retention additives on the properties and printability of coated papers is discussed.

• Journal of Food Hygiene and Safety
• /
• v.14 no.1
• /
• pp.34-44
• /
• 1999

A survey was conducted to investigate the attitudes of public officials related to food hygiene toward food safety. The official groups were divided into four sub-groups based on their area, agency, gender and age. Response of each group to the survey was statistically analysed. The survey's results showed that most of them (87.0%) were satisfied with a domestic level of food hygiene. But, some of then (29.8%) considered unsatisfactoryly on safety of the food they eat. Their response to food safety did not statistically significant between each group of area, agency and age but, in case of gender, female group showed stastically more negative attitude to food safety than male one (P<0.05). All groups chose residues of chemical substances such as pesticides and food additives as the most potential food risk factor followed by foodborne pathogens, heavy metals and animal drug residues. The results are not consistent with the scientific judgement. Therefore, more education and information were needed fro these groups. They pointed out food manufacturer as a responsible group for poor food hygiene (48.7%). In addition, food manufacture and processing were selected as main business types with the lowest level in the food hygiene but official, working in the area of the central government and Seoul metropolitan city, pointed out food services establishments as the poorest hygiene one (P<0.01). This results suggested that education and information to let mind of responded groups change, working in this part, and governmental financial support are needed to improve hygiene level of food manufacture and processing (70.3%). They also chose HACCP as the most effective way for improving the level of food hygiene followed by Recall, PL (Product Liability), monitoring, labeling and increasing of number of company with good manufacture and processing (GMP).

• Korean Journal of Soil Science and Fertilizer
• /
• v.48 no.3
• /
• pp.218-224
• /
• 2015

Zeolite may help crop growth, yield increase, and salt removal. Field experiment under greenhouse cultivation was conducted to study the effect of zeolite application on growth and yield of Chinese cabbage (Brassica campestris L.) and soil. Soil was classified as Gyuam series (coarse silty, mixed, nonacid, mesic family of Aquic Fluvaquentic Eutrudepts). Six zeolite rates were 0, 3, 5, 10, 20 and $40Mg\;ha^{-1}$. Experimental design was a completely randomized design. Chinese cabbage was grown three times consecutively. Established plant number of plant and yield as fresh weight (F.W.) were measured and soil samples were taken before and after harvesting. Chinese cabbage yield was $76.9Mg\;ha^{-1}$ at a rate of $20Mg\;zeolite\;ha^{-1}$, $54.3Mg\;ha^{-1}$ at a rate of $5Mg\;zeolite\;ha^{-1}$, and $51.3Mg\;ha^{-1}$ at control (no zeolite), respectively. Second order regression analysis using zeolite rate and yield showed that optimum zeolite application rate was between 24 and $26Mg\;ha^{-1}$. The regression equation explained about 88% of the yield variability. The electrical conductivity (EC) decreased from 3.2 to $1.0dS\;m^{-1}$ for all treatments so that salt accumulation was not a concern. Based on the results, we recommend that optimum zeolite application rate is between 20 and $24Mg\;ha^{-1}$ for Chinese cabbage under greenhouse cultivation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.9
• /
• pp.808-812
• /
• 2006

In this dissertation, Ru-Zr metal gate electrode deposited on two kinds of dielectric were formed for MOS capacitor. Sample co-sputtering method was used as a alloy deposition method. Various atomic composition was achieved when metal film was deposited by controlling sputtering power. To study the characteristics of metal gate electrode, C-V(capacitance-voltage) and I-V(current-voltage) measurements were performed. Work function and equivalent oxide thickness were extracted from C-V curves by using NCSU(North Carolina State University) quantum model. After the annealing at various temperature, thermal/chemical stability was verified by measuring the variation of effective oxide thickness and work function. This dissertation verified that Ru-Zr gate electrodes deposited on $SiO_{2}\;and\;ZrO_{2}$ have compatible work functions for NMOS at the specified atomic composition and this metal alloys are thermally stable. Ru-Zr metal gate electrode deposited on $SiO_{2}\;and\;ZrO_{2}$ exhibit low sheet resistance and this values were varied with temperature. Metal alloy deposited on two kinds of dielectric proposed in this dissertation will be used in company with high-k dielectric replacing polysilicon and will lead improvement of CMOS properties.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.1
• /
• pp.109-120
• /
• 2013

As information-oriented industry has been developed and electronic devices has come to be smaller, lighter, multifunctional, and high speed, the components used to the devices need to be much high density and should have find pattern due to high integration. Also, diverse reliability problems happen as user environment is getting harsher. For this reasons, establishing and securing products and components reliability comes to key factor in company's competitiveness. It makes accelerated test important to check product reliability in fast way. Out of fine pattern failure modes, failure of Electrochemical Migration(ECM) is kind of degradation of insulation resistance by electro-chemical reaction, which it comes to be accelerated by biased voltage in high temperature and high humidity environment. In this thesis, the accelerated life test for failure caused by ECM on fine pattern substrate, $20/20{\mu}m$ pattern width/space applied by Semi Additive Process, was performed, and through this test, the investigation of failure mechanism and the life-time prediction evaluation under actual user environment was implemented. The result of accelerated test has been compared and estimated with life distribution and life stress relatively by using Minitab software and its acceleration rate was also tested. Through estimated weibull distribution, B10 life has been estimated under 95% confidence level of failure data happened in each test conditions. And the life in actual usage environment has been predicted by using generalized Eyring model considering temperature and humidity by developing Arrhenius reaction rate theory, and acceleration factors by test conditions have been calculated.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.17 no.9
• /
• pp.808-815
• /
• 2005

A technical analysis was conducted to predict the development trends for heat pump system. This study was based on submitted patents from 1983 to 2002 in Korea, USA, and Japan. The total number of raw data from the registered database was 19,261 and the obtained data to be analyzed through the filtering process was 5,143. Japan's technical development for the heat pump system was more dominant than the other countries. Approximately $54\%$ of the total patents related with the heat pump system was registered by Japan. The number of patents for the heat pump system registered by Korea was very low in 1980's, but it increased rapidly in 1990's. As a result, the number of patents applied by Korea was $21\%$ of all patents. When the patent was categorized into compression, absorption/ad-sorption, and chemical type, the technology of compression type made up over $80\%$ in each country. Approximately $93\%$ of the patents surveyed in this study was developed for air or water source heat pumps because of easy applications compared with other heat sources. The $89\%$ of all patents was applied by companies when applicants were divided into three groups of company, individual, and the others (national institute, university, and so on).

• Journal of Ginseng Research
• /
• v.38 no.4
• /
• pp.244-250
• /
• 2014

Background: Panax ginseng has distinct and impressive health benefits, such as improved blood pressure and immune system functioning. Rg3-enriched Korean Red Ginseng (REKRG) isolated from Korean Red Ginseng contains a high percentage of Rg3. Methods: In this study, we examined the effects of REKRG on endothelial cell nitric oxide synthase (eNOS) activation and adhesion molecules in endothelial cells and vascular function in rats. Results: REKRG dose-dependently increased eNOS phosphorylation and nitric oxide (NO) production in endothelial cells. In addition, REKRG markedly inhibited the tumor necrosis factor-${\alpha}$ (TNF-${\alpha}$)-mediated induction of intercellular adhesion molecule (ICAM)-1 and cyclooxygenase (COX)-2 expressions in endothelial cells. REKRG improved endothelium-dependent vasorelaxation in the Wistar-Kyoto (WKY) rat and spontaneously hypertensive rats (SHRs) compared with controls. Furthermore, REKRG treatment for 6 weeks increased serum NO levels and reduced the mean aortic intima-media thickness compared with controls. Conclusion: Taken together, these results suggest that REKRG increased vascular function and improved immune system functioning. Therefore, REKRG is a very useful food for preventing or improving various cardiovascular diseases.

• Plant Journal
• /
• v.8 no.3
• /
• pp.49-54
• /
• 2012

In this study, the way how we can find the defects of motor windings in advance will be discussed. The magnetic flux spectrum in the high frequency region of the large motor was analyzed based on the actual fault practices related with motor windings. In case of defective motor relative amplitude ratio of the stator slot frequency to its sideband was very high compared to that of healthy motor. And the defective signal related with motor windings was indicated in advance in the magnetic flux spectrum prior to over 1 month before failure. Considering this aspect it can be estimated that magnetic flux spectrum in the high frequency region has the excellent predictive diagnostic capability.