• Economic and Environmental Geology
• /
• v.44 no.1
• /
• pp.37-48
• /
• 2011

Some industrial minerals used in domestic industries such as monazite, apatite, bauxite, and ilmenite belong to NORM (Naturally Occurring Radioactive Materials) because they show a high radioactivity. Products, semi-products, wastes, and by-products which show higher radioactivity than NORM belong to TENORM (Technologically Enhanced Naturally Occurring Radioactive Materials). Apatite used for manufacturing phosphate fertilizer in Namhae Chemical company belongs to NORM, and its by-product, phospo-gypsum, belongs to TENORM. A geological investigation is needed for the future environmental impact assessment of the Namhae Chemical company's site. According to survey results of the Namhae Chemical company's site, soil mineral composition indicated the mixture of minerals derived from the country rock (quartz, feldspar, mica, $l4{\AA}$ mineral, kaolin and amphibole) and minerals from the gypsum open-air storage yard (gypsum and apatite). Soil samples showed average content of U 4.6 ppm and Th 10 ppm, which are similar to average crustal abundances. They also show average contents of $^{40}K$ 191-1,166 Bq/kg, $^{226}Ra$ 15.6-710 Bq/kg, and $^{232}Th$ 17.4-72.7 Bq/kg, which indicate moderate levels of radio nuclide. But $^{226}Ra$ anomaly in the gypsum open storage yard is clearly confirmed and $^{232}Th$ anomaly is also confirmed in the east road side of the factory and nearby mountain areas. Soil external hazard indices ranged 0.24-2.01 with the average 0.54. Although most external hazard indices were lower than 1, which means radiation hazard index to be negligible, 5 samples out of total 40 samples showed higher values than 1, and further detailed investigation is needed.

• Journal of the Korean Institute of Gas
• /
• v.16 no.4
• /
• pp.38-43
• /
• 2012

The purpose of this study is to carry out the consequence analysis of an accident related to the release of Hydrogen chloride occurred in a petrochemical company in Korea and suggest the measures to prevent similar accidents from happening again. The total amount released through the safety valve of HCl Column was calculated based on the rated capacity of the safety valve, the ideal gas equation and mechanical energy balance, respectively. As a result of the calculation, we found that the amount of HCl released through the safety valve was at least 76.8 kg. Also, we predicted the dispersion concentration at the position of the injured workers(more than 350 m away from the accident location) using simulation programs such as PHAST. The results of ALOHA and K-CARM are 304 ppm and 1,700 ppm respectively. However, PHAST calculation indicated that the concentration is less than l ppm. From these results, we can understand that workers were injured by HCl gas released from the safe valve and the concentration of gas might be less than 1 ppm. Also, it is important for toxic gases such as HCl to be vented safely to the atmosphere after scrubbing.

• Korean journal of applied entomology
• /
• v.7
• /
• pp.39-51
• /
• 1969

The study involved determination of resistance levels of spider mites ta argano-phosphates using topical application and slide dip techniques; laboratory serening tests of alternative acaricides using an O/P resistant strain and a field trial of the screened materials. 1. Strains of Tetranychus were from Timaru(TR), Havelock Narth (HNR), Lincaln (LN). Germany (GR, GN). Comparisons of the resistant strains and normal strains at the LD50 and LC50 levels were as follows : (a) Using the topical application tochnique; with Parathian. resistant levels of the GR. TR and HNR strains of T. urticae were respeativuly, 1035. 484 and 452 times as resistant' as the LN strain. (b) Using the slide dip technique; with Phosdrin, resistant of GR, TR and HNR strains of T. urticae were 635, 274 and 266 times greater respeativuly, than the GN strain. 2. The laboratory sereaning tests were carried out far their contact plus stomach and residual effect to assess the toxicities of eleven alternative materials which would be used far control of O/P resistant strain of T. urticae. The acaricide groups represented were 3 organo-chlorines (Spidex, Kelthane and C 8514), 2 nitrophenyls (UC 19786 and Morocide), 2 cyclic carbonates(Eradex and Morestan). I carbamate (UC2004 7A), 1 mixture of carbamate and orano-chlorine and 2 other chemicals (C 8677 and M2527). From all acaricide tested. Kelthane and Morocide were the most effective, folowed by Spidex and M2527. Morestan, C8514. C8677 and RS 143 were intermediate, but Eradex, UC 19786 and UC 20046A were poor. 3, The number of sapmles required for estimation of the population in the field evaluation of acaricidal effects was one giving the highest practical precision. It was decided, after preliminary sampling trials. to use samples of 30 leaves per replicate which gave a $5.7\%$ standard error. 4. In the field trials, Morocide applied at the $0.05\%\;and\; 0.04\%$ a. i. conc. to black currant trees gave excellent control of O/P resistant population of T. urticae for about 12 days, but Morocide 0.025 and Kel thane $0.02\%$ a. i. cone. gave efficient control for about 6 days. In other words. first applications of Kel thane ane Moroeide gave very high degrees of control of O/P resistant population of the two-spotted spider mite. However, the results indicate that secondary application would sometimes be necessary. There was no foliage damage of black Currants and strawberries by either acaricides at the concentrations used. Acknowledgment ... The authors are grateful to: Dr. R. P. pottinger, Senior Lecturer in Agricultural Zoology. Lincoln college. New Zealand. for his helpful assistance in aiding with the organization of thd field work. Department of agriculture officers for mite colonies. Mr. D. A. Slade, Technical Advisor. Fruitgrowers' Federation (now at Massey University) for his assistance and provision of mites for testing. Mr T. McRae of Timaru for permission to use his crops for field tests. The following chemical companies and I or their New Zealand agents for so readily supplying samples of acarides; Ivan Watkins-Dow Limited. Fruitgrowers Chemical Company Limited. Henry H. York & company (New Zealand). Shell Oil (New Zealand) Limited.

• Korean Chemical Engineering Research
• /
• v.45 no.3
• /
• pp.242-248
• /
• 2007

For an optimal design of automotive electric system, it is important to have a reliable modeling tool to predict the charge-discharge behaviors of the automotive battery. In this work, a two-dimensional modeling was carried out to predict the charge-discharge behaviors of a 12-V automotive lead-acid battery. The model accounted for electrochemical kinetics and ionic mass transfer in a battery cell. In order to validate the modeling, modeling results were compared with the experimental data of the charge-discharge behaviors of a lead-acid battery. The discharge behaviors were measured with three different discharge rates of C/5, C/10, and C/20 at operating temperature of $25^{\circ}C$. The batteries were charged with constant current of 30A until the charging voltage reached to a predetermined value of 14.24 V and then the charging voltage was kept constant. The discharge and charge curves from the measurements and modeling were in good agreement. Based on the modeling, the distributions of the electrical potentials of the solid and solution phases, the porosity of the electrodes, and the current density within the electrodes as well as the acid concentration can be predicted as a function of charge and discharge time.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.5
• /
• pp.721-728
• /
• 2018

Objective: This experiment was conducted to determine the differences in the apparent ileal (AID) and total tract digestibility (ATTD) of nutrients and indispensable amino acids (IAA) in high-fiber diets with wheat middlings, rice bran or alfalfa meal fed to Duroc${\times}$(Landrace${\times}$Yorkshire) (DLY) and Duroc${\times}$ (Berkshire${\times}$Jiaxing) (DBJ) growing barrows. Methods: Eighteen DLY and 18 DBJ growing barrows were randomly allotted to a $2{\times}3$ factorial arrangement involving 2 crossbreeds and 3 high-fiber diets. The experiment lasted 15 d with 10 d for diets adaptation, 3 d for feces collection and 2 d for digesta collection. Three diets were based on corn and soybean meal with 25% wheat middlings, rice bran and alfalfa meal respectively. Results: DBJ had a greater (p<0.05) AID of isoleucine, leucine, lysine, phenylalanine and valine and a lower (p<0.05) AID of methionine than DLY. The hindgut disappearance of acid detergent fiber for DBJ was greater (p<0.05) than DLY. The ATTD of gross energy, dry matter, organic matter, neutral detergent fiber and acid detergent fiber in wheat middlings diet were greater (p<0.05) than in rice bran and alfalfa meal diets. The hindgut disappearance of neutral detergent fiber and acid detergent fiber in wheat middlings diet or rice bran diet were the highest or lowest (p<0.05), and those of alfalfa meal diet were the middle. Barrows fed rice bran diet had a greater (p<0.05) hindgut disappearance of gross energy, dry matter and organic matter and lower hindgut disappearance of neutral detergent fiber and acid detergent fiber than barrows fed alfalfa meal diet Conclusion: DBJ growing barrows showed a significant higher digestibility of fiber in the hindgut and most IAA in the small intestine compared with DLY barrows. The digestibilities of chemical constituents and IAA were affected by the diets formulated with different fiber sources.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.5
• /
• pp.1359-1367
• /
• 2008

We analyzed the physical and chemical properties such as proximate analysis, ultimate analysis, heating values, thermogravimetric analysis, and combustion test for the organic sludges generated from paper and beverage manufacturing industries in the industrial complex. The average water and combustible content of the organic sludges from paper and beverage manufacturing industries were 66.07% and 14.67%, 54.98% and 26.77%, respectively. From the ultimate analysis of the organic sludges, C, H, O, N, and S compositions were 21.75%, 3.42%, 32.70%, 0.63%, and 0.30%, respectively. For beverage manufacturing industries, C, H, O, N, and S compositions were 39.88%, 4.28%, 23.20%. 2.65%, and 0.35%, respectively. According to the results of investigating the lower heating values by Dulong's equation, 1 sludge(T company) was on the range of over 2,000 kcal/kg. This sludge could be directly applied to industries which try to use the energy by direct incineration. From the TGA test, the minimum combustion temperature of A company's sludge was about $700^{\circ}C$ for direct use for energy and that of 3 sludges(C, I, and T company) were at least over $800^{\circ}C$.

• Journal of the Korean Institute of Gas
• /
• v.23 no.6
• /
• pp.1-7
• /
• 2019

Most oil refineries and chemical plants have flare systems designed to mitigate pressure rises in process facilities in case of emergencies that require the release of large amounts of gas due to sudden process shutdowns such as power outages. However, the rise of the flame of the flare system causes civil complaints from residents around the factory due to visible pollution, and economic loss occurs in the company, which requires constant management. In this study, two items were diagnosed and analyzed in order to derive the optimal operation method of flare system. First, to detect the cause of the rise in flame height, the acoustic leak detector was used to check gas leaks in safety valves and pressure control valves. Second, to identify the cause of flame instability, the pulsation phenomenon was diagnosed through the CFD simulation and modeling experiments of the sealing drum. By confirming the leak at 4.3% of the safety valve and 10% of the pressure control valve, the cause of abnormal sparking was derived. The information presented in this study can be easily applied to any company that has a flare system, and is expected to prevent complaints and product loss.

• 한국벤처창업학회:학술대회논문집
• /
• 2008.04a
• /
• pp.143-178
• /
• 2008

This study is to look into the spin-off ventures which was incorporated based on the technology developed by public research institute, but underwent difficulties confronted during the development stages focused on the growth process and the factors contributed to their success. The case study was conducted with i-Sense Co., Ltd. which is a ventures organized by professors as a form of research based spin-off venture. i-Sense Co., Ltd. is a new-technology based ventures to produce self-tester for blood sugar level which was incorporated by Prof. Cha, Keun-sik and Prof. Nam, Hak-hyun of Department of Chemistry in Kwangwoon University along with the graduate course students of the Research Laboratory of the University. The two professors operated the Chemical Sensor Research Center at the Kwangwoon University where they produced many preliminary research outputs related with bio-sensors. They also executed the service works at the specialized company they established for research development to make research fund. They established i-Sense Co., Ltd. with the aim to carry out the research they want to. But contrary to the initial intention of the founders of the company, i-Sense Co., Ltd. has grown up as manufacturing company which produces and sells the self-tester for blood sugar level and is expected to be listed by Initial Public Offering (IPO) on the KOSDAQ in 2008. This study is to analyze the foundation and the growth process of i-Sense Co., Ltd. as successful research based spin-off ventures, to find out the factors contributed to their success by enabling them to overcome the difficulties experienced during the growth process, and eventually to provide with suggestive meanings in policy and practical point of view that leaded the research based spin-off ventures to success.

• Korean Journal of Labor Studies
• /
• v.17 no.1
• /
• pp.177-208
• /
• 2011

This article examines that how in-house subcontract has been introduced and developed in metal industry in 1970s, focusing typical workplaces in steel industry. That was essential for the capital to insure control mechanism for large number of laborer because of mobilizing a large scale of capital in industrialization of heavy metal industry. In case of Pohang steel industry, this necessity was fulfilled by introduction and imitation of Japanese personnel management by being included of Japanese economic hinterland. This was embodied in both constructing internal labor market for regular workers and introducing in-house subcontracting system for contingent workers at workplaces. This was exceptional comparing in-house subcontracting system in Korean steel industry with in-house subcontracting system in advanced economies, because of disappearing in-house subcontracting system by making internal labor market. And this was closely linked by late development of Korea. Implications of Pohang steel company's case are as follows : first, late development effect in formation of employment system, second, in linking informality of Korean employment system. This implications mean that in-house subcontracting in steel industry is structured as mechanism for personnel management in large factory being influenced by industrialization of heavy industry. In this point, improvements which include wide economic solution beyond labor solution for present problem of in-house subcontracting system is desirable.

• Korean Chemical Engineering Research
• /
• v.52 no.5
• /
• pp.603-612
• /
• 2014

Lots of networks are constructed in a large scale industrial complex. Each network meet their demands through production or transportation of materials which are needed to companies in a network. Network directly produces materials for satisfying demands in a company or purchase form outside due to demand uncertainty, financial factor, and so on. Especially utility network and hydrogen network are typical and major networks in a large scale industrial complex. Many studies have been done mainly with focusing on minimizing the total cost or optimizing the network structure. But, few research tries to make an integrated network model by connecting utility network and hydrogen network In this study, deterministic mixed integer linear programming model is developed for integrating utility network and hydrogen network. Steam Methane Reforming process is necessary for combining two networks. After producing hydrogen from Steam-Methane Reforming process whose raw material is steam vents from utility network, produced hydrogen go into hydrogen network and fulfill own needs. Proposed model can suggest optimized case in integrated network model, optimized blueprint, and calculate optimal total cost. The capability of the proposed model is tested by applying it to Yeosu industrial complex in Korea. Yeosu industrial complex has the one of the biggest petrochemical complex and various papers are based in data of Yeosu industrial complex. From a case study, the integrated network model suggests more optimal conclusions compared with previous results obtained by individually researching utility network and hydrogen network.